An update for kernel is now available for openEuler-20.03-LTS-SP4 Security Advisory openeuler-security@openeuler.org openEuler security committee openEuler-SA-2025-1094 Final 1.0 1.0 2025-02-08 Initial 2025-02-08 2025-02-08 openEuler SA Tool V1.0 2025-02-08 kernel security update An update for kernel is now available for openEuler-20.03-LTS-SP4 The Linux Kernel, the operating system core itself. Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min While the $val/$val2 values passed in from userspace are always >= 0 integers, the limits of the control can be signed integers and the $min can be non-zero and less than zero. To correctly validate $val/$val2 against platform_max, add the $min offset to val first.(CVE-2022-48917) In the Linux kernel, the following vulnerability has been resolved: tcp: do not accept ACK of bytes we never sent This patch is based on a detailed report and ideas from Yepeng Pan and Christian Rossow. ACK seq validation is currently following RFC 5961 5.2 guidelines: The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. It needs to be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an ACK, drop the segment, and return". The "ignored" above implies that the processing of the incoming data segment continues, which means the ACK value is treated as acceptable. This mitigation makes the ACK check more stringent since any ACK < SND.UNA wouldn't be accepted, instead only ACKs that are in the range ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through. This can be refined for new (and possibly spoofed) flows, by not accepting ACK for bytes that were never sent. This greatly improves TCP security at a little cost. I added a Fixes: tag to make sure this patch will reach stable trees, even if the 'blamed' patch was adhering to the RFC. tp->bytes_acked was added in linux-4.2 Following packetdrill test (courtesy of Yepeng Pan) shows the issue at hand: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1024) = 0 // ---------------- Handshake ------------------- // // when window scale is set to 14 the window size can be extended to // 65535 * (2^14) = 1073725440. Linux would accept an ACK packet // with ack number in (Server_ISN+1-1073725440. Server_ISN+1) // ,though this ack number acknowledges some data never // sent by the server. +0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14> +0 > S. 0:0(0) ack 1 <...> +0 < . 1:1(0) ack 1 win 65535 +0 accept(3, ..., ...) = 4 // For the established connection, we send an ACK packet, // the ack packet uses ack number 1 - 1073725300 + 2^32, // where 2^32 is used to wrap around. // Note: we used 1073725300 instead of 1073725440 to avoid possible // edge cases. // 1 - 1073725300 + 2^32 = 3221241997 // Oops, old kernels happily accept this packet. +0 < . 1:1001(1000) ack 3221241997 win 65535 // After the kernel fix the following will be replaced by a challenge ACK, // and prior malicious frame would be dropped. +0 > . 1:1(0) ack 1001(CVE-2023-52881) A race condition was found in the Linux kernel's net/bluetooth device driver in conn_info_{min,max}_age_set() function. This can result in integrity overflow issue, possibly leading to bluetooth connection abnormality or denial of service. (CVE-2024-24857) A race condition was found in the Linux kernel's net/bluetooth in sniff_{min,max}_interval_set() function. This can result in a bluetooth sniffing exception issue, possibly leading denial of service. (CVE-2024-24859) In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Prevent UAF in proc_cpuset_show() An UAF can happen when /proc/cpuset is read as reported in [1]. This can be reproduced by the following methods: 1.add an mdelay(1000) before acquiring the cgroup_lock In the cgroup_path_ns function. 2.$cat /proc/<pid>/cpuset repeatly. 3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/ $umount /sys/fs/cgroup/cpuset/ repeatly. The race that cause this bug can be shown as below: (umount) | (cat /proc/<pid>/cpuset) css_release | proc_cpuset_show css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id); css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...); cgroup_destroy_root | mutex_lock(&cgroup_mutex); rebind_subsystems | cgroup_free_root | | // cgrp was freed, UAF | cgroup_path_ns_locked(cgrp,..); When the cpuset is initialized, the root node top_cpuset.css.cgrp will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated &cgroup_root.cgrp. When the umount operation is executed, top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp. The problem is that when rebinding to cgrp_dfl_root, there are cases where the cgroup_root allocated by setting up the root for cgroup v1 is cached. This could lead to a Use-After-Free (UAF) if it is subsequently freed. The descendant cgroups of cgroup v1 can only be freed after the css is released. However, the css of the root will never be released, yet the cgroup_root should be freed when it is unmounted. This means that obtaining a reference to the css of the root does not guarantee that css.cgrp->root will not be freed. Fix this problem by using rcu_read_lock in proc_cpuset_show(). As cgroup_root is kfree_rcu after commit d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe"), css->cgroup won't be freed during the critical section. To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to replace task_get_css with task_css. [1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd(CVE-2024-43853) In the Linux kernel, the following vulnerability has been resolved: dm cache: fix out-of-bounds access to the dirty bitset when resizing dm-cache checks the dirty bits of the cache blocks to be dropped when shrinking the fast device, but an index bug in bitset iteration causes out-of-bounds access. Reproduce steps: 1. create a cache device of 1024 cache blocks (128 bytes dirty bitset) dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. shrink the fast device to 512 cache blocks, triggering out-of-bounds access to the dirty bitset (offset 0x80) dmsetup suspend cache dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0 Read of size 8 at addr ffffc900000f3080 by task dmsetup/131 (...snip...) The buggy address belongs to the virtual mapping at [ffffc900000f3000, ffffc900000f5000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by making the index post-incremented.(CVE-2024-50279) In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Fix slab-use-after-free read in sg_release() Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release().(CVE-2024-56631) In the Linux kernel, the following vulnerability has been resolved: net: Fix icmp host relookup triggering ip_rt_bug arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is: WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20 Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: <IRQ> ip_send_skb+0x14/0x40 __icmp_send+0x42d/0x6a0 ipv4_link_failure+0xe2/0x1d0 arp_error_report+0x3c/0x50 neigh_invalidate+0x8d/0x100 neigh_timer_handler+0x2e1/0x330 call_timer_fn+0x21/0x120 __run_timer_base.part.0+0x1c9/0x270 run_timer_softirq+0x4c/0x80 handle_softirqs+0xac/0x280 irq_exit_rcu+0x62/0x80 sysvec_apic_timer_interrupt+0x77/0x90 The script below reproduces this scenario: ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \ dir out priority 0 ptype main flag localok icmp ip l a veth1 type veth ip a a 192.168.141.111/24 dev veth0 ip l s veth0 up ping 192.168.141.155 -c 1 icmp_route_lookup() create input routes for locally generated packets while xfrm relookup ICMP traffic.Then it will set input route (dst->out = ip_rt_bug) to skb for DESTUNREACH. For ICMP err triggered by locally generated packets, dst->dev of output route is loopback. Generally, xfrm relookup verification is not required on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1). Skip icmp relookup for locally generated packets to fix it.(CVE-2024-56647) In the Linux kernel, the following vulnerability has been resolved: sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport Since transport->sock has been set to NULL during reset transport, XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request() to dereference the transport->sock that has been set to NULL.(CVE-2024-56688) In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY Since commit 8f4f68e788c3 ("crypto: pcrypt - Fix hungtask for PADATA_RESET"), the pcrypt encryption and decryption operations return -EAGAIN when the CPU goes online or offline. In alg_test(), a WARN is generated when pcrypt_aead_decrypt() or pcrypt_aead_encrypt() returns -EAGAIN, the unnecessary panic will occur when panic_on_warn set 1. Fix this issue by calling crypto layer directly without parallelization in that case.(CVE-2024-56690) In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv When mounting ocfs2 and then remounting it as read-only, a slab-use-after-free occurs after the user uses a syscall to quota_getnextquota. Specifically, sb_dqinfo(sb, type)->dqi_priv is the dangling pointer. During the remounting process, the pointer dqi_priv is freed but is never set as null leaving it to be accessed. Additionally, the read-only option for remounting sets the DQUOT_SUSPENDED flag instead of setting the DQUOT_USAGE_ENABLED flags. Moreover, later in the process of getting the next quota, the function ocfs2_get_next_id is called and only checks the quota usage flags and not the quota suspended flags. To fix this, I set dqi_priv to null when it is freed after remounting with read-only and put a check for DQUOT_SUSPENDED in ocfs2_get_next_id. [akpm@linux-foundation.org: coding-style cleanups](CVE-2024-57892) An update for kernel is now available for openEuler-20.03-LTS-SP4. openEuler Security has rated this update as having a security impact of high. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section. High kernel https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2022-48917 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2023-52881 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-24857 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-24859 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43853 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-50279 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56631 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56647 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56688 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56690 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57892 https://nvd.nist.gov/vuln/detail/CVE-2022-48917 https://nvd.nist.gov/vuln/detail/CVE-2023-52881 https://nvd.nist.gov/vuln/detail/CVE-2024-24857 https://nvd.nist.gov/vuln/detail/CVE-2024-24859 https://nvd.nist.gov/vuln/detail/CVE-2024-43853 https://nvd.nist.gov/vuln/detail/CVE-2024-50279 https://nvd.nist.gov/vuln/detail/CVE-2024-56631 https://nvd.nist.gov/vuln/detail/CVE-2024-56647 https://nvd.nist.gov/vuln/detail/CVE-2024-56688 https://nvd.nist.gov/vuln/detail/CVE-2024-56690 https://nvd.nist.gov/vuln/detail/CVE-2024-57892 openEuler-20.03-LTS-SP4 bpftool-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm bpftool-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm kernel-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm kernel-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm kernel-debugsource-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm kernel-devel-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm kernel-source-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm kernel-tools-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm kernel-tools-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm kernel-tools-devel-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm perf-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm perf-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm python2-perf-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm python2-perf-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm python3-perf-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm python3-perf-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.aarch64.rpm bpftool-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm bpftool-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm kernel-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm kernel-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm kernel-debugsource-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm kernel-devel-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm kernel-source-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm kernel-tools-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm kernel-tools-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm kernel-tools-devel-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm perf-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm perf-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm python2-perf-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm python2-perf-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm python3-perf-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm python3-perf-debuginfo-4.19.90-2502.1.0.0314.oe2003sp4.x86_64.rpm kernel-4.19.90-2502.1.0.0314.oe2003sp4.src.rpm In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min While the $val/$val2 values passed in from userspace are always >= 0 integers, the limits of the control can be signed integers and the $min can be non-zero and less than zero. To correctly validate $val/$val2 against platform_max, add the $min offset to val first. 2025-02-08 CVE-2022-48917 openEuler-20.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 In the Linux kernel, the following vulnerability has been resolved: tcp: do not accept ACK of bytes we never sent This patch is based on a detailed report and ideas from Yepeng Pan and Christian Rossow. ACK seq validation is currently following RFC 5961 5.2 guidelines: The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. It needs to be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an ACK, drop the segment, and return". The "ignored" above implies that the processing of the incoming data segment continues, which means the ACK value is treated as acceptable. This mitigation makes the ACK check more stringent since any ACK < SND.UNA wouldn't be accepted, instead only ACKs that are in the range ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through. This can be refined for new (and possibly spoofed) flows, by not accepting ACK for bytes that were never sent. This greatly improves TCP security at a little cost. I added a Fixes: tag to make sure this patch will reach stable trees, even if the 'blamed' patch was adhering to the RFC. tp->bytes_acked was added in linux-4.2 Following packetdrill test (courtesy of Yepeng Pan) shows the issue at hand: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1024) = 0 // ---------------- Handshake ------------------- // // when window scale is set to 14 the window size can be extended to // 65535 * (2^14) = 1073725440. Linux would accept an ACK packet // with ack number in (Server_ISN+1-1073725440. Server_ISN+1) // ,though this ack number acknowledges some data never // sent by the server. +0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14> +0 > S. 0:0(0) ack 1 <...> +0 < . 1:1(0) ack 1 win 65535 +0 accept(3, ..., ...) = 4 // For the established connection, we send an ACK packet, // the ack packet uses ack number 1 - 1073725300 + 2^32, // where 2^32 is used to wrap around. // Note: we used 1073725300 instead of 1073725440 to avoid possible // edge cases. // 1 - 1073725300 + 2^32 = 3221241997 // Oops, old kernels happily accept this packet. +0 < . 1:1001(1000) ack 3221241997 win 65535 // After the kernel fix the following will be replaced by a challenge ACK, // and prior malicious frame would be dropped. +0 > . 1:1(0) ack 1001 2025-02-08 CVE-2023-52881 openEuler-20.03-LTS-SP4 Medium 5.9 AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 A race condition was found in the Linux kernel's net/bluetooth device driver in conn_info_{min,max}_age_set() function. This can result in integrity overflow issue, possibly leading to bluetooth connection abnormality or denial of service. 2025-02-08 CVE-2024-24857 openEuler-20.03-LTS-SP4 Medium 6.8 AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 A race condition was found in the Linux kernel's net/bluetooth in sniff_{min,max}_interval_set() function. This can result in a bluetooth sniffing exception issue, possibly leading denial of service. 2025-02-08 CVE-2024-24859 openEuler-20.03-LTS-SP4 Medium 4.8 AV:A/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Prevent UAF in proc_cpuset_show() An UAF can happen when /proc/cpuset is read as reported in [1]. This can be reproduced by the following methods: 1.add an mdelay(1000) before acquiring the cgroup_lock In the cgroup_path_ns function. 2.$cat /proc/<pid>/cpuset repeatly. 3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/ $umount /sys/fs/cgroup/cpuset/ repeatly. The race that cause this bug can be shown as below: (umount) | (cat /proc/<pid>/cpuset) css_release | proc_cpuset_show css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id); css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...); cgroup_destroy_root | mutex_lock(&cgroup_mutex); rebind_subsystems | cgroup_free_root | | // cgrp was freed, UAF | cgroup_path_ns_locked(cgrp,..); When the cpuset is initialized, the root node top_cpuset.css.cgrp will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated &cgroup_root.cgrp. When the umount operation is executed, top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp. The problem is that when rebinding to cgrp_dfl_root, there are cases where the cgroup_root allocated by setting up the root for cgroup v1 is cached. This could lead to a Use-After-Free (UAF) if it is subsequently freed. The descendant cgroups of cgroup v1 can only be freed after the css is released. However, the css of the root will never be released, yet the cgroup_root should be freed when it is unmounted. This means that obtaining a reference to the css of the root does not guarantee that css.cgrp->root will not be freed. Fix this problem by using rcu_read_lock in proc_cpuset_show(). As cgroup_root is kfree_rcu after commit d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe"), css->cgroup won't be freed during the critical section. To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to replace task_get_css with task_css. [1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd 2025-02-08 CVE-2024-43853 openEuler-20.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 In the Linux kernel, the following vulnerability has been resolved: dm cache: fix out-of-bounds access to the dirty bitset when resizing dm-cache checks the dirty bits of the cache blocks to be dropped when shrinking the fast device, but an index bug in bitset iteration causes out-of-bounds access. Reproduce steps: 1. create a cache device of 1024 cache blocks (128 bytes dirty bitset) dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. shrink the fast device to 512 cache blocks, triggering out-of-bounds access to the dirty bitset (offset 0x80) dmsetup suspend cache dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0 Read of size 8 at addr ffffc900000f3080 by task dmsetup/131 (...snip...) The buggy address belongs to the virtual mapping at [ffffc900000f3000, ffffc900000f5000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by making the index post-incremented. 2025-02-08 CVE-2024-50279 openEuler-20.03-LTS-SP4 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Fix slab-use-after-free read in sg_release() Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release(). 2025-02-08 CVE-2024-56631 openEuler-20.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 In the Linux kernel, the following vulnerability has been resolved: net: Fix icmp host relookup triggering ip_rt_bug arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is: WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20 Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: <IRQ> ip_send_skb+0x14/0x40 __icmp_send+0x42d/0x6a0 ipv4_link_failure+0xe2/0x1d0 arp_error_report+0x3c/0x50 neigh_invalidate+0x8d/0x100 neigh_timer_handler+0x2e1/0x330 call_timer_fn+0x21/0x120 __run_timer_base.part.0+0x1c9/0x270 run_timer_softirq+0x4c/0x80 handle_softirqs+0xac/0x280 irq_exit_rcu+0x62/0x80 sysvec_apic_timer_interrupt+0x77/0x90 The script below reproduces this scenario: ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \ dir out priority 0 ptype main flag localok icmp ip l a veth1 type veth ip a a 192.168.141.111/24 dev veth0 ip l s veth0 up ping 192.168.141.155 -c 1 icmp_route_lookup() create input routes for locally generated packets while xfrm relookup ICMP traffic.Then it will set input route (dst->out = ip_rt_bug) to skb for DESTUNREACH. For ICMP err triggered by locally generated packets, dst->dev of output route is loopback. Generally, xfrm relookup verification is not required on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1). Skip icmp relookup for locally generated packets to fix it. 2025-02-08 CVE-2024-56647 openEuler-20.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 In the Linux kernel, the following vulnerability has been resolved: sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport Since transport->sock has been set to NULL during reset transport, XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request() to dereference the transport->sock that has been set to NULL. 2025-02-08 CVE-2024-56688 openEuler-20.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY Since commit 8f4f68e788c3 ("crypto: pcrypt - Fix hungtask for PADATA_RESET"), the pcrypt encryption and decryption operations return -EAGAIN when the CPU goes online or offline. In alg_test(), a WARN is generated when pcrypt_aead_decrypt() or pcrypt_aead_encrypt() returns -EAGAIN, the unnecessary panic will occur when panic_on_warn set 1. Fix this issue by calling crypto layer directly without parallelization in that case. 2025-02-08 CVE-2024-56690 openEuler-20.03-LTS-SP4 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094 In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv When mounting ocfs2 and then remounting it as read-only, a slab-use-after-free occurs after the user uses a syscall to quota_getnextquota. Specifically, sb_dqinfo(sb, type)->dqi_priv is the dangling pointer. During the remounting process, the pointer dqi_priv is freed but is never set as null leaving it to be accessed. Additionally, the read-only option for remounting sets the DQUOT_SUSPENDED flag instead of setting the DQUOT_USAGE_ENABLED flags. Moreover, later in the process of getting the next quota, the function ocfs2_get_next_id is called and only checks the quota usage flags and not the quota suspended flags. To fix this, I set dqi_priv to null when it is freed after remounting with read-only and put a check for DQUOT_SUSPENDED in ocfs2_get_next_id. [akpm@linux-foundation.org: coding-style cleanups] 2025-02-08 CVE-2024-57892 openEuler-20.03-LTS-SP4 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-02-08 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1094