<?xml version="1.0" encoding="UTF-8"?>
<cvrfdoc xmlns="http://www.icasi.org/CVRF/schema/cvrf/1.1" xmlns:cvrf="http://www.icasi.org/CVRF/schema/cvrf/1.1">
	<DocumentTitle xml:lang="en">An update for kernel is now available for openEuler-22.03-LTS-SP3</DocumentTitle>
	<DocumentType>Security Advisory</DocumentType>
	<DocumentPublisher Type="Vendor">
		<ContactDetails>openeuler-security@openeuler.org</ContactDetails>
		<IssuingAuthority>openEuler security committee</IssuingAuthority>
	</DocumentPublisher>
	<DocumentTracking>
		<Identification>
			<ID>openEuler-SA-2025-1162</ID>
		</Identification>
		<Status>Final</Status>
		<Version>1.0</Version>
		<RevisionHistory>
			<Revision>
				<Number>1.0</Number>
				<Date>2025-02-21</Date>
				<Description>Initial</Description>
			</Revision>
		</RevisionHistory>
		<InitialReleaseDate>2025-02-21</InitialReleaseDate>
		<CurrentReleaseDate>2025-02-21</CurrentReleaseDate>
		<Generator>
			<Engine>openEuler SA Tool V1.0</Engine>
			<Date>2025-02-21</Date>
		</Generator>
	</DocumentTracking>
	<DocumentNotes>
		<Note Title="Synopsis" Type="General" Ordinal="1" xml:lang="en">kernel security update</Note>
		<Note Title="Summary" Type="General" Ordinal="2" xml:lang="en">An update for kernel is now available for openEuler-22.03-LTS-SP3</Note>
		<Note Title="Description" Type="General" Ordinal="3" xml:lang="en">The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

ila: call nf_unregister_net_hooks() sooner

syzbot found an use-after-free Read in ila_nf_input [1]

Issue here is that ila_xlat_exit_net() frees the rhashtable,
then call nf_unregister_net_hooks().

It should be done in the reverse way, with a synchronize_rcu().

This is a good match for a pre_exit() method.

[1]
 BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
 BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
 BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
 BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16

CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
 &lt;TASK&gt;
  __dump_stack lib/dump_stack.c:93 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  rht_key_hashfn include/linux/rhashtable.h:159 [inline]
  __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
  ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline]
  ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
  ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
  nf_hook include/linux/netfilter.h:269 [inline]
  NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312
  __netif_receive_skb_one_core net/core/dev.c:5661 [inline]
  __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775
  process_backlog+0x662/0x15b0 net/core/dev.c:6108
  __napi_poll+0xcb/0x490 net/core/dev.c:6772
  napi_poll net/core/dev.c:6841 [inline]
  net_rx_action+0x89b/0x1240 net/core/dev.c:6963
  handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
  run_ksoftirqd+0xca/0x130 kernel/softirq.c:928
  smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
  kthread+0x2f0/0x390 kernel/kthread.c:389
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
 &lt;/TASK&gt;

The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xbfffffff(buddy)
raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000
raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187
  set_page_owner include/linux/page_owner.h:32 [inline]
  post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493
  prep_new_page mm/page_alloc.c:1501 [inline]
  get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439
  __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695
  __alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
  alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
  ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103
  __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130
  __do_kmalloc_node mm/slub.c:4146 [inline]
  __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164
  __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650
  bucket_table_alloc lib/rhashtable.c:186 [inline]
  rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071
  ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613
  ops_ini
---truncated---(CVE-2024-46782)

In the Linux kernel, the following vulnerability has been resolved:

drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error

Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.

dev-&gt;filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index &gt; 32 to index &gt;= 32 to resolve this
issue.(CVE-2024-47697)

In the Linux kernel, the following vulnerability has been resolved:

nvme-rdma: unquiesce admin_q before destroy it

Kernel will hang on destroy admin_q while we create ctrl failed, such
as following calltrace:

PID: 23644    TASK: ff2d52b40f439fc0  CPU: 2    COMMAND: &quot;nvme&quot;
 #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15
 #1 [ff61d23de260fc08] schedule at ffffffff8323c014
 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1
 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a
 #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006
 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce
 #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced
 #7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b
 #8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362
 #9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25
    RIP: 00007fda7891d574  RSP: 00007ffe2ef06958  RFLAGS: 00000202
    RAX: ffffffffffffffda  RBX: 000055e8122a4d90  RCX: 00007fda7891d574
    RDX: 000000000000012b  RSI: 000055e8122a4d90  RDI: 0000000000000004
    RBP: 00007ffe2ef079c0   R8: 000000000000012b   R9: 000055e8122a4d90
    R10: 0000000000000000  R11: 0000000000000202  R12: 0000000000000004
    R13: 000055e8122923c0  R14: 000000000000012b  R15: 00007fda78a54500
    ORIG_RAX: 0000000000000001  CS: 0033  SS: 002b

This due to we have quiesced admi_q before cancel requests, but forgot
to unquiesce before destroy it, as a result we fail to drain the
pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here
try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and
simplify the code.(CVE-2024-49569)

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: SCO: Fix UAF on sco_sock_timeout

conn-&gt;sk maybe have been unlinked/freed while waiting for sco_conn_lock
so this checks if the conn-&gt;sk is still valid by checking if it part of
sco_sk_list.(CVE-2024-50125)

In the Linux kernel, the following vulnerability has been resolved:

usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd()

The &quot;*cmd&quot; variable can be controlled by the user via debugfs.  That means
&quot;new_cam&quot; can be as high as 255 while the size of the uc-&gt;updated[] array
is UCSI_MAX_ALTMODES (30).

The call tree is:
ucsi_cmd() // val comes from simple_attr_write_xsigned()
-&gt; ucsi_send_command()
   -&gt; ucsi_send_command_common()
      -&gt; ucsi_run_command() // calls ucsi-&gt;ops-&gt;sync_control()
         -&gt; ucsi_ccg_sync_control()(CVE-2024-50268)

In the Linux kernel, the following vulnerability has been resolved:

net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT

In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed
to be either root or ingress. This assumption is bogus since it&apos;s valid
to create egress qdiscs with major handle ffff:
Budimir Markovic found that for qdiscs like DRR that maintain an active
class list, it will cause a UAF with a dangling class pointer.

In 066a3b5b2346, the concern was to avoid iterating over the ingress
qdisc since its parent is itself. The proper fix is to stop when parent
TC_H_ROOT is reached because the only way to retrieve ingress is when a
hierarchy which does not contain a ffff: major handle call into
qdisc_lookup with TC_H_MAJ(TC_H_ROOT).

In the scenario where major ffff: is an egress qdisc in any of the tree
levels, the updates will also propagate to TC_H_ROOT, which then the
iteration must stop.


 net/sched/sch_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)(CVE-2024-53057)

In the Linux kernel, the following vulnerability has been resolved:

mm: resolve faulty mmap_region() error path behaviour

The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.

A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.

Taking advantage of previous patches in this series we move a number of
checks earlier in the code, simplifying things by moving the core of the
logic into a static internal function __mmap_region().

Doing this allows us to perform a number of checks up front before we do
any real work, and allows us to unwind the writable unmap check
unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE
validation unconditionally also.

We move a number of things here:

1. We preallocate memory for the iterator before we call the file-backed
   memory hook, allowing us to exit early and avoid having to perform
   complicated and error-prone close/free logic. We carefully free
   iterator state on both success and error paths.

2. The enclosing mmap_region() function handles the mapping_map_writable()
   logic early. Previously the logic had the mapping_map_writable() at the
   point of mapping a newly allocated file-backed VMA, and a matching
   mapping_unmap_writable() on success and error paths.

   We now do this unconditionally if this is a file-backed, shared writable
   mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however
   doing so does not invalidate the seal check we just performed, and we in
   any case always decrement the counter in the wrapper.

   We perform a debug assert to ensure a driver does not attempt to do the
   opposite.

3. We also move arch_validate_flags() up into the mmap_region()
   function. This is only relevant on arm64 and sparc64, and the check is
   only meaningful for SPARC with ADI enabled. We explicitly add a warning
   for this arch if a driver invalidates this check, though the code ought
   eventually to be fixed to eliminate the need for this.

With all of these measures in place, we no longer need to explicitly close
the VMA on error paths, as we place all checks which might fail prior to a
call to any driver mmap hook.

This eliminates an entire class of errors, makes the code easier to reason
about and more robust.(CVE-2024-53096)

In the Linux kernel, the following vulnerability has been resolved:

netfilter: ipset: add missing range check in bitmap_ip_uadt

When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists,
the values of ip and ip_to are slightly swapped. Therefore, the range check
for ip should be done later, but this part is missing and it seems that the
vulnerability occurs.

So we should add missing range checks and remove unnecessary range checks.(CVE-2024-53141)

In the Linux kernel, the following vulnerability has been resolved:

comedi: Flush partial mappings in error case

If some remap_pfn_range() calls succeeded before one failed, we still have
buffer pages mapped into the userspace page tables when we drop the buffer
reference with comedi_buf_map_put(bm). The userspace mappings are only
cleaned up later in the mmap error path.

Fix it by explicitly flushing all mappings in our VMA on the error path.

See commit 79a61cc3fc04 (&quot;mm: avoid leaving partial pfn mappings around in
error case&quot;).(CVE-2024-53148)

In the Linux kernel, the following vulnerability has been resolved:

wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()

I found the following bug in my fuzzer:

  UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
  index 255 is out of range for type &apos;htc_endpoint [22]&apos;
  CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
  Workqueue: events request_firmware_work_func
  Call Trace:
   &lt;TASK&gt;
   dump_stack_lvl+0x180/0x1b0
   __ubsan_handle_out_of_bounds+0xd4/0x130
   htc_issue_send.constprop.0+0x20c/0x230
   ? _raw_spin_unlock_irqrestore+0x3c/0x70
   ath9k_wmi_cmd+0x41d/0x610
   ? mark_held_locks+0x9f/0xe0
   ...

Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring.(CVE-2024-53156)

In the Linux kernel, the following vulnerability has been resolved:

net: inet6: do not leave a dangling sk pointer in inet6_create()

sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.

Clear the sock sk pointer on error.(CVE-2024-56600)

In the Linux kernel, the following vulnerability has been resolved:

net: inet: do not leave a dangling sk pointer in inet_create()

sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.

Clear the sk pointer in the sock object on error.(CVE-2024-56601)

In the Linux kernel, the following vulnerability has been resolved:

gpio: grgpio: Add NULL check in grgpio_probe

devm_kasprintf() can return a NULL pointer on failure,but this
returned value in grgpio_probe is not checked.
Add NULL check in grgpio_probe, to handle kernel NULL
pointer dereference error.(CVE-2024-56634)

In the Linux kernel, the following vulnerability has been resolved:

s390/cpum_sf: Handle CPU hotplug remove during sampling

CPU hotplug remove handling triggers the following function
call sequence:

   CPUHP_AP_PERF_S390_SF_ONLINE  --&gt; s390_pmu_sf_offline_cpu()
   ...
   CPUHP_AP_PERF_ONLINE          --&gt; perf_event_exit_cpu()

The s390 CPUMF sampling CPU hotplug handler invokes:

 s390_pmu_sf_offline_cpu()
 +--&gt;  cpusf_pmu_setup()
       +--&gt; setup_pmc_cpu()
            +--&gt; deallocate_buffers()

This function de-allocates all sampling data buffers (SDBs) allocated
for that CPU at event initialization. It also clears the
PMU_F_RESERVED bit. The CPU is gone and can not be sampled.

With the event still being active on the removed CPU, the CPU event
hotplug support in kernel performance subsystem triggers the
following function calls on the removed CPU:

  perf_event_exit_cpu()
  +--&gt; perf_event_exit_cpu_context()
       +--&gt; __perf_event_exit_context()
	    +--&gt; __perf_remove_from_context()
	         +--&gt; event_sched_out()
	              +--&gt; cpumsf_pmu_del()
	                   +--&gt; cpumsf_pmu_stop()
                                +--&gt; hw_perf_event_update()

to stop and remove the event. During removal of the event, the
sampling device driver tries to read out the remaining samples from
the sample data buffers (SDBs). But they have already been freed
(and may have been re-assigned). This may lead to a use after free
situation in which case the samples are most likely invalid. In the
best case the memory has not been reassigned and still contains
valid data.

Remedy this situation and check if the CPU is still in reserved
state (bit PMU_F_RESERVED set). In this case the SDBs have not been
released an contain valid data. This is always the case when
the event is removed (and no CPU hotplug off occured).
If the PMU_F_RESERVED bit is not set, the SDB buffers are gone.(CVE-2024-57849)

In the Linux kernel, the following vulnerability has been resolved:

ila: serialize calls to nf_register_net_hooks()

syzbot found a race in ila_add_mapping() [1]

commit 031ae72825ce (&quot;ila: call nf_unregister_net_hooks() sooner&quot;)
attempted to fix a similar issue.

Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.

Add a mutex to make sure at most one thread is calling nf_register_net_hooks().

[1]
 BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
 BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501

CPU: 1 UID: 0 PID: 5501 Comm: dhcpcd Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
 &lt;IRQ&gt;
  __dump_stack lib/dump_stack.c:94 [inline]
  dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
  print_address_description mm/kasan/report.c:378 [inline]
  print_report+0xc3/0x620 mm/kasan/report.c:489
  kasan_report+0xd9/0x110 mm/kasan/report.c:602
  rht_key_hashfn include/linux/rhashtable.h:159 [inline]
  __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
  ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:127 [inline]
  ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
  ila_nf_input+0x1ee/0x620 net/ipv6/ila/ila_xlat.c:185
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xbb/0x200 net/netfilter/core.c:626
  nf_hook.constprop.0+0x42e/0x750 include/linux/netfilter.h:269
  NF_HOOK include/linux/netfilter.h:312 [inline]
  ipv6_rcv+0xa4/0x680 net/ipv6/ip6_input.c:309
  __netif_receive_skb_one_core+0x12e/0x1e0 net/core/dev.c:5672
  __netif_receive_skb+0x1d/0x160 net/core/dev.c:5785
  process_backlog+0x443/0x15f0 net/core/dev.c:6117
  __napi_poll.constprop.0+0xb7/0x550 net/core/dev.c:6883
  napi_poll net/core/dev.c:6952 [inline]
  net_rx_action+0xa94/0x1010 net/core/dev.c:7074
  handle_softirqs+0x213/0x8f0 kernel/softirq.c:561
  __do_softirq kernel/softirq.c:595 [inline]
  invoke_softirq kernel/softirq.c:435 [inline]
  __irq_exit_rcu+0x109/0x170 kernel/softirq.c:662
  irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
  instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
  sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049(CVE-2024-57900)

In the Linux kernel, the following vulnerability has been resolved:

sched: sch_cake: add bounds checks to host bulk flow fairness counts

Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.

To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).

As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow&apos;s quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it&apos;s not worth
complicating the code to preserve the old behaviour.(CVE-2025-21647)

In the Linux kernel, the following vulnerability has been resolved:

netfilter: conntrack: clamp maximum hashtable size to INT_MAX

Use INT_MAX as maximum size for the conntrack hashtable. Otherwise, it
is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when
resizing hashtable because __GFP_NOWARN is unset. See:

  0708a0afe291 (&quot;mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls&quot;)

Note: hashtable resize is only possible from init_netns.(CVE-2025-21648)

In the Linux kernel, the following vulnerability has been resolved:

iomap: avoid avoid truncating 64-bit offset to 32 bits

on 32-bit kernels, iomap_write_delalloc_scan() was inadvertently using a
32-bit position due to folio_next_index() returning an unsigned long.
This could lead to an infinite loop when writing to an xfs filesystem.(CVE-2025-21667)</Note>
		<Note Title="Topic" Type="General" Ordinal="4" xml:lang="en">An update for kernel is now available for openEuler-22.03-LTS-SP3.

openEuler Security has rated this update as having a security impact of high. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section.</Note>
		<Note Title="Severity" Type="General" Ordinal="5" xml:lang="en">High</Note>
		<Note Title="Affected Component" Type="General" Ordinal="6" xml:lang="en">kernel</Note>
	</DocumentNotes>
	<DocumentReferences>
		<Reference Type="Self">
			<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
		</Reference>
		<Reference Type="openEuler CVE">
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-46782</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-47697</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-49569</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-50125</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-50268</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53057</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53096</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53141</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53148</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53156</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56600</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56601</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56634</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57849</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57900</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21647</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21648</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21667</URL>
		</Reference>
		<Reference Type="Other">
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-46782</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-47697</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-49569</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-50125</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-50268</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-53057</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-53096</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-53141</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-53148</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-53156</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-56600</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-56601</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-56634</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-57849</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-57900</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2025-21647</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2025-21648</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2025-21667</URL>
		</Reference>
	</DocumentReferences>
	<ProductTree xmlns="http://www.icasi.org/CVRF/schema/prod/1.1">
		<Branch Type="Product Name" Name="openEuler">
			<FullProductName ProductID="openEuler-22.03-LTS-SP3" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">openEuler-22.03-LTS-SP3</FullProductName>
		</Branch>
		<Branch Type="Package Arch" Name="src">
			<FullProductName ProductID="kernel-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-5.10.0-250.0.0.153.oe2203sp3.src.rpm</FullProductName>
		</Branch>
		<Branch Type="Package Arch" Name="x86_64">
			<FullProductName ProductID="kernel-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-debuginfo-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-debuginfo-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-debugsource-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-debugsource-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-devel-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-devel-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-headers-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-headers-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-source-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-source-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-tools-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-debuginfo-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-tools-debuginfo-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-devel-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-tools-devel-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="perf-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">perf-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="perf-debuginfo-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">perf-debuginfo-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="python3-perf-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">python3-perf-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
			<FullProductName ProductID="python3-perf-debuginfo-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">python3-perf-debuginfo-5.10.0-250.0.0.153.oe2203sp3.x86_64.rpm</FullProductName>
		</Branch>
		<Branch Type="Package Arch" Name="aarch64">
			<FullProductName ProductID="kernel-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-debuginfo-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-debuginfo-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-debugsource-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-debugsource-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-devel-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-devel-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-headers-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-headers-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-source-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-source-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-tools-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-debuginfo-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-tools-debuginfo-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-devel-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">kernel-tools-devel-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="perf-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">perf-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="perf-debuginfo-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">perf-debuginfo-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="python3-perf-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">python3-perf-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
			<FullProductName ProductID="python3-perf-debuginfo-5.10.0-250.0.0.153" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP3">python3-perf-debuginfo-5.10.0-250.0.0.153.oe2203sp3.aarch64.rpm</FullProductName>
		</Branch>
	</ProductTree>
	<Vulnerability Ordinal="1" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

ila: call nf_unregister_net_hooks() sooner

syzbot found an use-after-free Read in ila_nf_input [1]

Issue here is that ila_xlat_exit_net() frees the rhashtable,
then call nf_unregister_net_hooks().

It should be done in the reverse way, with a synchronize_rcu().

This is a good match for a pre_exit() method.

[1]
 BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
 BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
 BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
 BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16

CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
 &lt;TASK&gt;
  __dump_stack lib/dump_stack.c:93 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  rht_key_hashfn include/linux/rhashtable.h:159 [inline]
  __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
  ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline]
  ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
  ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
  nf_hook include/linux/netfilter.h:269 [inline]
  NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312
  __netif_receive_skb_one_core net/core/dev.c:5661 [inline]
  __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775
  process_backlog+0x662/0x15b0 net/core/dev.c:6108
  __napi_poll+0xcb/0x490 net/core/dev.c:6772
  napi_poll net/core/dev.c:6841 [inline]
  net_rx_action+0x89b/0x1240 net/core/dev.c:6963
  handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
  run_ksoftirqd+0xca/0x130 kernel/softirq.c:928
  smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
  kthread+0x2f0/0x390 kernel/kthread.c:389
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
 &lt;/TASK&gt;

The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xbfffffff(buddy)
raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000
raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187
  set_page_owner include/linux/page_owner.h:32 [inline]
  post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493
  prep_new_page mm/page_alloc.c:1501 [inline]
  get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439
  __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695
  __alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
  alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
  ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103
  __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130
  __do_kmalloc_node mm/slub.c:4146 [inline]
  __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164
  __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650
  bucket_table_alloc lib/rhashtable.c:186 [inline]
  rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071
  ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613
  ops_ini
---truncated---</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-46782</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="2" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error

Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.

dev-&gt;filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index &gt; 32 to index &gt;= 32 to resolve this
issue.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-47697</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="3" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

nvme-rdma: unquiesce admin_q before destroy it

Kernel will hang on destroy admin_q while we create ctrl failed, such
as following calltrace:

PID: 23644    TASK: ff2d52b40f439fc0  CPU: 2    COMMAND: &quot;nvme&quot;
 #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15
 #1 [ff61d23de260fc08] schedule at ffffffff8323c014
 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1
 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a
 #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006
 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce
 #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced
 #7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b
 #8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362
 #9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25
    RIP: 00007fda7891d574  RSP: 00007ffe2ef06958  RFLAGS: 00000202
    RAX: ffffffffffffffda  RBX: 000055e8122a4d90  RCX: 00007fda7891d574
    RDX: 000000000000012b  RSI: 000055e8122a4d90  RDI: 0000000000000004
    RBP: 00007ffe2ef079c0   R8: 000000000000012b   R9: 000055e8122a4d90
    R10: 0000000000000000  R11: 0000000000000202  R12: 0000000000000004
    R13: 000055e8122923c0  R14: 000000000000012b  R15: 00007fda78a54500
    ORIG_RAX: 0000000000000001  CS: 0033  SS: 002b

This due to we have quiesced admi_q before cancel requests, but forgot
to unquiesce before destroy it, as a result we fail to drain the
pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here
try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and
simplify the code.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-49569</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.7</BaseScore>
				<Vector>AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="4" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: SCO: Fix UAF on sco_sock_timeout

conn-&gt;sk maybe have been unlinked/freed while waiting for sco_conn_lock
so this checks if the conn-&gt;sk is still valid by checking if it part of
sco_sk_list.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-50125</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="5" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd()

The &quot;*cmd&quot; variable can be controlled by the user via debugfs.  That means
&quot;new_cam&quot; can be as high as 255 while the size of the uc-&gt;updated[] array
is UCSI_MAX_ALTMODES (30).

The call tree is:
ucsi_cmd() // val comes from simple_attr_write_xsigned()
-&gt; ucsi_send_command()
   -&gt; ucsi_send_command_common()
      -&gt; ucsi_run_command() // calls ucsi-&gt;ops-&gt;sync_control()
         -&gt; ucsi_ccg_sync_control()</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-50268</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.1</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="6" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT

In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed
to be either root or ingress. This assumption is bogus since it&apos;s valid
to create egress qdiscs with major handle ffff:
Budimir Markovic found that for qdiscs like DRR that maintain an active
class list, it will cause a UAF with a dangling class pointer.

In 066a3b5b2346, the concern was to avoid iterating over the ingress
qdisc since its parent is itself. The proper fix is to stop when parent
TC_H_ROOT is reached because the only way to retrieve ingress is when a
hierarchy which does not contain a ffff: major handle call into
qdisc_lookup with TC_H_MAJ(TC_H_ROOT).

In the scenario where major ffff: is an egress qdisc in any of the tree
levels, the updates will also propagate to TC_H_ROOT, which then the
iteration must stop.


 net/sched/sch_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-53057</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="7" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

mm: resolve faulty mmap_region() error path behaviour

The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.

A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.

Taking advantage of previous patches in this series we move a number of
checks earlier in the code, simplifying things by moving the core of the
logic into a static internal function __mmap_region().

Doing this allows us to perform a number of checks up front before we do
any real work, and allows us to unwind the writable unmap check
unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE
validation unconditionally also.

We move a number of things here:

1. We preallocate memory for the iterator before we call the file-backed
   memory hook, allowing us to exit early and avoid having to perform
   complicated and error-prone close/free logic. We carefully free
   iterator state on both success and error paths.

2. The enclosing mmap_region() function handles the mapping_map_writable()
   logic early. Previously the logic had the mapping_map_writable() at the
   point of mapping a newly allocated file-backed VMA, and a matching
   mapping_unmap_writable() on success and error paths.

   We now do this unconditionally if this is a file-backed, shared writable
   mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however
   doing so does not invalidate the seal check we just performed, and we in
   any case always decrement the counter in the wrapper.

   We perform a debug assert to ensure a driver does not attempt to do the
   opposite.

3. We also move arch_validate_flags() up into the mmap_region()
   function. This is only relevant on arm64 and sparc64, and the check is
   only meaningful for SPARC with ADI enabled. We explicitly add a warning
   for this arch if a driver invalidates this check, though the code ought
   eventually to be fixed to eliminate the need for this.

With all of these measures in place, we no longer need to explicitly close
the VMA on error paths, as we place all checks which might fail prior to a
call to any driver mmap hook.

This eliminates an entire class of errors, makes the code easier to reason
about and more robust.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-53096</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="8" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

netfilter: ipset: add missing range check in bitmap_ip_uadt

When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists,
the values of ip and ip_to are slightly swapped. Therefore, the range check
for ip should be done later, but this part is missing and it seems that the
vulnerability occurs.

So we should add missing range checks and remove unnecessary range checks.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-53141</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="9" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

comedi: Flush partial mappings in error case

If some remap_pfn_range() calls succeeded before one failed, we still have
buffer pages mapped into the userspace page tables when we drop the buffer
reference with comedi_buf_map_put(bm). The userspace mappings are only
cleaned up later in the mmap error path.

Fix it by explicitly flushing all mappings in our VMA on the error path.

See commit 79a61cc3fc04 (&quot;mm: avoid leaving partial pfn mappings around in
error case&quot;).</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-53148</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.0</BaseScore>
				<Vector>AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="10" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()

I found the following bug in my fuzzer:

  UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
  index 255 is out of range for type &apos;htc_endpoint [22]&apos;
  CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
  Workqueue: events request_firmware_work_func
  Call Trace:
   &lt;TASK&gt;
   dump_stack_lvl+0x180/0x1b0
   __ubsan_handle_out_of_bounds+0xd4/0x130
   htc_issue_send.constprop.0+0x20c/0x230
   ? _raw_spin_unlock_irqrestore+0x3c/0x70
   ath9k_wmi_cmd+0x41d/0x610
   ? mark_held_locks+0x9f/0xe0
   ...

Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-53156</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="11" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

net: inet6: do not leave a dangling sk pointer in inet6_create()

sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.

Clear the sock sk pointer on error.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-56600</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="12" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

net: inet: do not leave a dangling sk pointer in inet_create()

sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.

Clear the sk pointer in the sock object on error.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-56601</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="13" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

gpio: grgpio: Add NULL check in grgpio_probe

devm_kasprintf() can return a NULL pointer on failure,but this
returned value in grgpio_probe is not checked.
Add NULL check in grgpio_probe, to handle kernel NULL
pointer dereference error.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-56634</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="14" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

s390/cpum_sf: Handle CPU hotplug remove during sampling

CPU hotplug remove handling triggers the following function
call sequence:

   CPUHP_AP_PERF_S390_SF_ONLINE  --&gt; s390_pmu_sf_offline_cpu()
   ...
   CPUHP_AP_PERF_ONLINE          --&gt; perf_event_exit_cpu()

The s390 CPUMF sampling CPU hotplug handler invokes:

 s390_pmu_sf_offline_cpu()
 +--&gt;  cpusf_pmu_setup()
       +--&gt; setup_pmc_cpu()
            +--&gt; deallocate_buffers()

This function de-allocates all sampling data buffers (SDBs) allocated
for that CPU at event initialization. It also clears the
PMU_F_RESERVED bit. The CPU is gone and can not be sampled.

With the event still being active on the removed CPU, the CPU event
hotplug support in kernel performance subsystem triggers the
following function calls on the removed CPU:

  perf_event_exit_cpu()
  +--&gt; perf_event_exit_cpu_context()
       +--&gt; __perf_event_exit_context()
	    +--&gt; __perf_remove_from_context()
	         +--&gt; event_sched_out()
	              +--&gt; cpumsf_pmu_del()
	                   +--&gt; cpumsf_pmu_stop()
                                +--&gt; hw_perf_event_update()

to stop and remove the event. During removal of the event, the
sampling device driver tries to read out the remaining samples from
the sample data buffers (SDBs). But they have already been freed
(and may have been re-assigned). This may lead to a use after free
situation in which case the samples are most likely invalid. In the
best case the memory has not been reassigned and still contains
valid data.

Remedy this situation and check if the CPU is still in reserved
state (bit PMU_F_RESERVED set). In this case the SDBs have not been
released an contain valid data. This is always the case when
the event is removed (and no CPU hotplug off occured).
If the PMU_F_RESERVED bit is not set, the SDB buffers are gone.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-57849</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="15" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

ila: serialize calls to nf_register_net_hooks()

syzbot found a race in ila_add_mapping() [1]

commit 031ae72825ce (&quot;ila: call nf_unregister_net_hooks() sooner&quot;)
attempted to fix a similar issue.

Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.

Add a mutex to make sure at most one thread is calling nf_register_net_hooks().

[1]
 BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
 BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501

CPU: 1 UID: 0 PID: 5501 Comm: dhcpcd Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
 &lt;IRQ&gt;
  __dump_stack lib/dump_stack.c:94 [inline]
  dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
  print_address_description mm/kasan/report.c:378 [inline]
  print_report+0xc3/0x620 mm/kasan/report.c:489
  kasan_report+0xd9/0x110 mm/kasan/report.c:602
  rht_key_hashfn include/linux/rhashtable.h:159 [inline]
  __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
  ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:127 [inline]
  ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
  ila_nf_input+0x1ee/0x620 net/ipv6/ila/ila_xlat.c:185
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xbb/0x200 net/netfilter/core.c:626
  nf_hook.constprop.0+0x42e/0x750 include/linux/netfilter.h:269
  NF_HOOK include/linux/netfilter.h:312 [inline]
  ipv6_rcv+0xa4/0x680 net/ipv6/ip6_input.c:309
  __netif_receive_skb_one_core+0x12e/0x1e0 net/core/dev.c:5672
  __netif_receive_skb+0x1d/0x160 net/core/dev.c:5785
  process_backlog+0x443/0x15f0 net/core/dev.c:6117
  __napi_poll.constprop.0+0xb7/0x550 net/core/dev.c:6883
  napi_poll net/core/dev.c:6952 [inline]
  net_rx_action+0xa94/0x1010 net/core/dev.c:7074
  handle_softirqs+0x213/0x8f0 kernel/softirq.c:561
  __do_softirq kernel/softirq.c:595 [inline]
  invoke_softirq kernel/softirq.c:435 [inline]
  __irq_exit_rcu+0x109/0x170 kernel/softirq.c:662
  irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
  instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
  sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2024-57900</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="16" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

sched: sch_cake: add bounds checks to host bulk flow fairness counts

Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.

To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).

As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow&apos;s quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it&apos;s not worth
complicating the code to preserve the old behaviour.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2025-21647</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.1</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="17" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

netfilter: conntrack: clamp maximum hashtable size to INT_MAX

Use INT_MAX as maximum size for the conntrack hashtable. Otherwise, it
is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when
resizing hashtable because __GFP_NOWARN is unset. See:

  0708a0afe291 (&quot;mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls&quot;)

Note: hashtable resize is only possible from init_netns.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2025-21648</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.1</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="18" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

iomap: avoid avoid truncating 64-bit offset to 32 bits

on 32-bit kernels, iomap_write_delalloc_scan() was inadvertently using a
32-bit position due to folio_next_index() returning an unsigned long.
This could lead to an infinite loop when writing to an xfs filesystem.</Note>
		</Notes>
		<ReleaseDate>2025-02-21</ReleaseDate>
		<CVE>CVE-2025-21667</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP3</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2025-02-21</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1162</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
</cvrfdoc>