An update for kernel is now available for openEuler-24.03-LTS Security Advisory openeuler-security@openeuler.org openEuler security committee openEuler-SA-2025-1450 Final 1.0 1.0 2025-04-25 Initial 2025-04-25 2025-04-25 openEuler SA Tool V1.0 2025-04-25 kernel security update An update for kernel is now available for openEuler-24.03-LTS The Linux Kernel, the operating system core itself. Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and size. This would make xlate_pos negative. [ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000 [ 23.734158] ================================================================================ [ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7 [ 23.734418] shift exponent -1 is negative Ensuring xlate_pos is a positive or zero before BIT.(CVE-2023-53034) In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to shrink read extent node in batches We use rwlock to protect core structure data of extent tree during its shrink, however, if there is a huge number of extent nodes in extent tree, during shrink of extent tree, it may hold rwlock for a very long time, which may trigger kernel hang issue. This patch fixes to shrink read extent node in batches, so that, critical region of the rwlock can be shrunk to avoid its extreme long time hold.(CVE-2024-41935) In the Linux kernel, the following vulnerability has been resolved: vrf: revert "vrf: Remove unnecessary RCU-bh critical section" This reverts commit 504fc6f4f7f681d2a03aa5f68aad549d90eab853. dev_queue_xmit_nit is expected to be called with BH disabled. __dev_queue_xmit has the following: /* Disable soft irqs for various locks below. Also * stops preemption for RCU. */ rcu_read_lock_bh(); VRF must follow this invariant. The referenced commit removed this protection. Which triggered a lockdep warning: ================================ WARNING: inconsistent lock state 6.11.0 #1 Tainted: G W -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30 {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 packet_rcv+0xa33/0x1320 __netif_receive_skb_core.constprop.0+0xcb0/0x3a90 __netif_receive_skb_list_core+0x2c9/0x890 netif_receive_skb_list_internal+0x610/0xcc0 [...] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rlock-AF_PACKET); <Interrupt> lock(rlock-AF_PACKET); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 mark_lock+0x102e/0x16b0 __lock_acquire+0x9ae/0x6170 lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 tpacket_rcv+0x863/0x3b30 dev_queue_xmit_nit+0x709/0xa40 vrf_finish_direct+0x26e/0x340 [vrf] vrf_l3_out+0x5f4/0xe80 [vrf] __ip_local_out+0x51e/0x7a0 [...](CVE-2024-49980) In the Linux kernel, the following vulnerability has been resolved: drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit() The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32 values that come from the user via the submit_lookup_cmds() function. This addition could lead to an integer wrapping bug so use size_add() to prevent that. Patchwork: https://patchwork.freedesktop.org/patch/624696/(CVE-2024-52559) In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Mark inode as bad as soon as error detected in mi_enum_attr() Extended the `mi_enum_attr()` function interface with an additional parameter, `struct ntfs_inode *ni`, to allow marking the inode as bad as soon as an error is detected.(CVE-2024-52560) In the Linux kernel, the following vulnerability has been resolved: crypto: qat/qat_4xxx - fix off by one in uof_get_name() The fw_objs[] array has "num_objs" elements so the > needs to be >= to prevent an out of bounds read.(CVE-2024-53162) In the Linux kernel, the following vulnerability has been resolved: SUNRPC: make sure cache entry active before cache_show The function `c_show` was called with protection from RCU. This only ensures that `cp` will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e(CVE-2024-53174) In the Linux kernel, the following vulnerability has been resolved: smb: During unmount, ensure all cached dir instances drop their dentry The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can race with various cached directory operations, which ultimately results in dentries not being dropped and these kernel BUGs: BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) ------------[ cut here ]------------ kernel BUG at fs/super.c:661! This happens when a cfid is in the process of being cleaned up when, and has been removed from the cfids->entries list, including: - Receiving a lease break from the server - Server reconnection triggers invalidate_all_cached_dirs(), which removes all the cfids from the list - The laundromat thread decides to expire an old cfid. To solve these problems, dropping the dentry is done in queued work done in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs() flushes that workqueue after it drops all the dentries of which it's aware. This is a global workqueue (rather than scoped to a mount), but the queued work is minimal. The final cleanup work for cleaning up a cfid is performed via work queued in the serverclose_wq workqueue; this is done separate from dropping the dentries so that close_all_cached_dirs() doesn't block on any server operations. Both of these queued works expect to invoked with a cfid reference and a tcon reference to avoid those objects from being freed while the work is ongoing. While we're here, add proper locking to close_all_cached_dirs(), and locking around the freeing of cfid->dentry.(CVE-2024-53176) In the Linux kernel, the following vulnerability has been resolved: smb: prevent use-after-free due to open_cached_dir error paths If open_cached_dir() encounters an error parsing the lease from the server, the error handling may race with receiving a lease break, resulting in open_cached_dir() freeing the cfid while the queued work is pending. Update open_cached_dir() to drop refs rather than directly freeing the cfid. Have cached_dir_lease_break(), cfids_laundromat_worker(), and invalidate_all_cached_dirs() clear has_lease immediately while still holding cfids->cfid_list_lock, and then use this to also simplify the reference counting in cfids_laundromat_worker() and invalidate_all_cached_dirs(). Fixes this KASAN splat (which manually injects an error and lease break in open_cached_dir()): ================================================================== BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0 Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65 CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: cifsiod smb2_cached_lease_break Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 print_report+0xce/0x660 kasan_report+0xd3/0x110 smb2_cached_lease_break+0x27/0xb0 process_one_work+0x50a/0xc50 worker_thread+0x2ba/0x530 kthread+0x17c/0x1c0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 open_cached_dir+0xa7d/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x51/0x70 kfree+0x174/0x520 open_cached_dir+0x97f/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x33/0x60 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x32/0x100 __queue_work+0x5c9/0x870 queue_work_on+0x82/0x90 open_cached_dir+0x1369/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff88811cc24c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 16 bytes inside of freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000)(CVE-2024-53177) In the Linux kernel, the following vulnerability has been resolved: smb: Don't leak cfid when reconnect races with open_cached_dir open_cached_dir() may either race with the tcon reconnection even before compound_send_recv() or directly trigger a reconnection via SMB2_open_init() or SMB_query_info_init(). The reconnection process invokes invalidate_all_cached_dirs() via cifs_mark_open_files_invalid(), which removes all cfids from the cfids->entries list but doesn't drop a ref if has_lease isn't true. This results in the currently-being-constructed cfid not being on the list, but still having a refcount of 2. It leaks if returned from open_cached_dir(). Fix this by setting cfid->has_lease when the ref is actually taken; the cfid will not be used by other threads until it has a valid time. Addresses these kmemleaks: unreferenced object 0xffff8881090c4000 (size 1024): comm "bash", pid 1860, jiffies 4295126592 hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 00 ca 45 22 81 88 ff ff f8 dc 4f 04 81 88 ff ff ..E"......O..... backtrace (crc 6f58c20f): [<ffffffff8b895a1e>] __kmalloc_cache_noprof+0x2be/0x350 [<ffffffff8bda06e3>] open_cached_dir+0x993/0x1fb0 [<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50 [<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0 [<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200 [<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0 [<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e unreferenced object 0xffff8881044fdcf8 (size 8): comm "bash", pid 1860, jiffies 4295126592 hex dump (first 8 bytes): 00 cc cc cc cc cc cc cc ........ backtrace (crc 10c106a9): [<ffffffff8b89a3d3>] __kmalloc_node_track_caller_noprof+0x363/0x480 [<ffffffff8b7d7256>] kstrdup+0x36/0x60 [<ffffffff8bda0700>] open_cached_dir+0x9b0/0x1fb0 [<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50 [<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0 [<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200 [<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0 [<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e And addresses these BUG splats when unmounting the SMB filesystem: BUG: Dentry ffff888140590ba0{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs] WARNING: CPU: 3 PID: 3433 at fs/dcache.c:1536 umount_check+0xd0/0x100 Modules linked in: CPU: 3 UID: 0 PID: 3433 Comm: bash Not tainted 6.12.0-rc4-g850925a8133c-dirty #49 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:umount_check+0xd0/0x100 Code: 8d 7c 24 40 e8 31 5a f4 ff 49 8b 54 24 40 41 56 49 89 e9 45 89 e8 48 89 d9 41 57 48 89 de 48 c7 c7 80 e7 db ac e8 f0 72 9a ff <0f> 0b 58 31 c0 5a 5b 5d 41 5c 41 5d 41 5e 41 5f e9 2b e5 5d 01 41 RSP: 0018:ffff88811cc27978 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888140590ba0 RCX: ffffffffaaf20bae RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881f6fb6f40 RBP: ffff8881462ec000 R08: 0000000000000001 R09: ffffed1023984ee3 R10: ffff88811cc2771f R11: 00000000016cfcc0 R12: ffff888134383e08 R13: 0000000000000002 R14: ffff8881462ec668 R15: ffffffffaceab4c0 FS: 00007f23bfa98740(0000) GS:ffff8881f6f80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556de4a6f808 CR3: 0000000123c80000 CR4: 0000000000350ef0 Call Trace: <TASK> d_walk+0x6a/0x530 shrink_dcache_for_umount+0x6a/0x200 generic_shutdown_super+0x52/0x2a0 kill_anon_super+0x22/0x40 cifs_kill_sb+0x159/0x1e0 deactivate_locked_super+0x66/0xe0 cleanup_mnt+0x140/0x210 task_work_run+0xfb/0x170 syscall_exit_to_user_mode+0x29f/0x2b0 do_syscall_64+0xa1/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f23bfb93ae7 Code: ff ff ff ff c3 66 0f 1f 44 00 00 48 8b 0d 11 93 0d 00 f7 d8 64 89 01 b8 ff ff ff ff eb bf 0f 1f 44 00 00 b8 50 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 92 0d 00 f7 d8 64 89 ---truncated---(CVE-2024-53178) In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of signing key Customers have reported use-after-free in @ses->auth_key.response with SMB2.1 + sign mounts which occurs due to following race: task A task B cifs_mount() dfs_mount_share() get_session() cifs_mount_get_session() cifs_send_recv() cifs_get_smb_ses() compound_send_recv() cifs_setup_session() smb2_setup_request() kfree_sensitive() smb2_calc_signature() crypto_shash_setkey() *UAF* Fix this by ensuring that we have a valid @ses->auth_key.response by checking whether @ses->ses_status is SES_GOOD or SES_EXITING with @ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF in smb2_reconnect_server()"), we made sure to call ->logoff() only when @ses was known to be good (e.g. valid ->auth_key.response), so it's safe to access signing key when @ses->ses_status == SES_EXITING.(CVE-2024-53179) In the Linux kernel, the following vulnerability has been resolved: um: vector: Do not use drvdata in release The drvdata is not available in release. Let's just use container_of() to get the vector_device instance. Otherwise, removing a vector device will result in a crash: RIP: 0033:vector_device_release+0xf/0x50 RSP: 00000000e187bc40 EFLAGS: 00010202 RAX: 0000000060028f61 RBX: 00000000600f1baf RCX: 00000000620074e0 RDX: 000000006220b9c0 RSI: 0000000060551c80 RDI: 0000000000000000 RBP: 00000000e187bc50 R08: 00000000603ad594 R09: 00000000e187bb70 R10: 000000000000135a R11: 00000000603ad422 R12: 00000000623ae028 R13: 000000006287a200 R14: 0000000062006d30 R15: 00000000623700b6 Kernel panic - not syncing: Segfault with no mm CPU: 0 UID: 0 PID: 16 Comm: kworker/0:1 Not tainted 6.12.0-rc6-g59b723cd2adb #1 Workqueue: events mc_work_proc Stack: 60028f61 623ae028 e187bc80 60276fcd 6220b9c0 603f5820 623ae028 00000000 e187bcb0 603a2bcd 623ae000 62370010 Call Trace: [<60028f61>] ? vector_device_release+0x0/0x50 [<60276fcd>] device_release+0x70/0xba [<603a2bcd>] kobject_put+0xba/0xe7 [<60277265>] put_device+0x19/0x1c [<60281266>] platform_device_put+0x26/0x29 [<60281e5f>] platform_device_unregister+0x2c/0x2e [<60029422>] vector_remove+0x52/0x58 [<60031316>] ? mconsole_reply+0x0/0x50 [<600310c8>] mconsole_remove+0x160/0x1cc [<603b19f4>] ? strlen+0x0/0x15 [<60066611>] ? __dequeue_entity+0x1a9/0x206 [<600666a7>] ? set_next_entity+0x39/0x63 [<6006666e>] ? set_next_entity+0x0/0x63 [<60038fa6>] ? um_set_signals+0x0/0x43 [<6003070c>] mc_work_proc+0x77/0x91 [<60057664>] process_scheduled_works+0x1b3/0x2dd [<60055f32>] ? assign_work+0x0/0x58 [<60057f0a>] worker_thread+0x1e9/0x293 [<6005406f>] ? set_pf_worker+0x0/0x64 [<6005d65d>] ? arch_local_irq_save+0x0/0x2d [<6005d748>] ? kthread_exit+0x0/0x3a [<60057d21>] ? worker_thread+0x0/0x293 [<6005dbf1>] kthread+0x126/0x12b [<600219c5>] new_thread_handler+0x85/0xb6(CVE-2024-53181) In the Linux kernel, the following vulnerability has been resolved: s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct() Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount (skb->users) and iucv_sock_recvmsg() does not decrement skb refcount at exit. This results in skb memory leak in skb_queue_purge() and WARN_ON in iucv_sock_destruct() during socket close. To fix this decrease skb refcount by one if MSG_PEEK is set in order to prevent memory leak and WARN_ON. WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv] CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1 Hardware name: IBM 3931 A01 704 (z/VM 7.3.0) Call Trace: [<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv] [<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv] [<001587c704117a32>] __sk_destruct+0x52/0x550 [<001587c704104a54>] __sock_release+0xa4/0x230 [<001587c704104c0c>] sock_close+0x2c/0x40 [<001587c702c5f5a8>] __fput+0x2e8/0x970 [<001587c7024148c4>] task_work_run+0x1c4/0x2c0 [<001587c7023b0716>] do_exit+0x996/0x1050 [<001587c7023b13aa>] do_group_exit+0x13a/0x360 [<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60 [<001587c7022bccca>] do_syscall+0x27a/0x380 [<001587c7049a6a0c>] __do_syscall+0x9c/0x160 [<001587c7049ce8a8>] system_call+0x70/0x98 Last Breaking-Event-Address: [<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv](CVE-2024-53210) In the Linux kernel, the following vulnerability has been resolved: nfsd: release svc_expkey/svc_export with rcu_work The last reference for `cache_head` can be reduced to zero in `c_show` and `e_show`(using `rcu_read_lock` and `rcu_read_unlock`). Consequently, `svc_export_put` and `expkey_put` will be invoked, leading to two issues: 1. The `svc_export_put` will directly free ex_uuid. However, `e_show`/`c_show` will access `ex_uuid` after `cache_put`, which can trigger a use-after-free issue, shown below. ================================================================== BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd] Read of size 1 at addr ff11000010fdc120 by task cat/870 CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_address_description.constprop.0+0x2c/0x3a0 print_report+0xb9/0x280 kasan_report+0xae/0xe0 svc_export_show+0x362/0x430 [nfsd] c_show+0x161/0x390 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 830: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_node_track_caller_noprof+0x1bc/0x400 kmemdup_noprof+0x22/0x50 svc_export_parse+0x8a9/0xb80 [nfsd] cache_do_downcall+0x71/0xa0 [sunrpc] cache_write_procfs+0x8e/0xd0 [sunrpc] proc_reg_write+0xe1/0x140 vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 868: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kfree+0xf3/0x3e0 svc_export_put+0x87/0xb0 [nfsd] cache_purge+0x17f/0x1f0 [sunrpc] nfsd_destroy_serv+0x226/0x2d0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e 2. We cannot sleep while using `rcu_read_lock`/`rcu_read_unlock`. However, `svc_export_put`/`expkey_put` will call path_put, which subsequently triggers a sleeping operation due to the following `dput`. ============================= WARNING: suspicious RCU usage 5.10.0-dirty #141 Not tainted ----------------------------- ... Call Trace: dump_stack+0x9a/0xd0 ___might_sleep+0x231/0x240 dput+0x39/0x600 path_put+0x1b/0x30 svc_export_put+0x17/0x80 e_show+0x1c9/0x200 seq_read_iter+0x63f/0x7c0 seq_read+0x226/0x2d0 vfs_read+0x113/0x2c0 ksys_read+0xc9/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Fix these issues by using `rcu_work` to help release `svc_expkey`/`svc_export`. This approach allows for an asynchronous context to invoke `path_put` and also facilitates the freeing of `uuid/exp/key` after an RCU grace period.(CVE-2024-53216) In the Linux kernel, the following vulnerability has been resolved: unicode: Fix utf8_load() error path utf8_load() requests the symbol "utf8_data_table" and then checks if the requested UTF-8 version is supported. If it's unsupported, it tries to put the data table using symbol_put(). If an unsupported version is requested, symbol_put() fails like this: kernel BUG at kernel/module/main.c:786! RIP: 0010:__symbol_put+0x93/0xb0 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? __symbol_put+0x93/0xb0 ? exc_invalid_op+0x51/0x70 ? __symbol_put+0x93/0xb0 ? asm_exc_invalid_op+0x1a/0x20 ? __pfx_cmp_name+0x10/0x10 ? __symbol_put+0x93/0xb0 ? __symbol_put+0x62/0xb0 utf8_load+0xf8/0x150 That happens because symbol_put() expects the unique string that identify the symbol, instead of a pointer to the loaded symbol. Fix that by using such string.(CVE-2024-53233) In the Linux kernel, the following vulnerability has been resolved: ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init() Under certain kernel configurations when building with Clang/LLVM, the compiler does not generate a return or jump as the terminator instruction for ip_vs_protocol_init(), triggering the following objtool warning during build time: vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6() At runtime, this either causes an oops when trying to load the ipvs module or a boot-time panic if ipvs is built-in. This same issue has been reported by the Intel kernel test robot previously. Digging deeper into both LLVM and the kernel code reveals this to be a undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer of 64 chars to store the registered protocol names and leaves it uninitialized after definition. The function calls strnlen() when concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE strnlen() performs an extra step to check whether the last byte of the input char buffer is a null character (commit 3009f891bb9f ("fortify: Allow strlen() and strnlen() to pass compile-time known lengths")). This, together with possibly other configurations, cause the following IR to be generated: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 { %1 = alloca [64 x i8], align 16 ... 14: ; preds = %11 %15 = getelementptr inbounds i8, ptr %1, i64 63 %16 = load i8, ptr %15, align 1 %17 = tail call i1 @llvm.is.constant.i8(i8 %16) %18 = icmp eq i8 %16, 0 %19 = select i1 %17, i1 %18, i1 false br i1 %19, label %20, label %23 20: ; preds = %14 %21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23 ... 23: ; preds = %14, %11, %20 %24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24 ... } The above code calculates the address of the last char in the buffer (value %15) and then loads from it (value %16). Because the buffer is never initialized, the LLVM GVN pass marks value %16 as undefined: %13 = getelementptr inbounds i8, ptr %1, i64 63 br i1 undef, label %14, label %17 This gives later passes (SCCP, in particular) more DCE opportunities by propagating the undef value further, and eventually removes everything after the load on the uninitialized stack location: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 { %1 = alloca [64 x i8], align 16 ... 12: ; preds = %11 %13 = getelementptr inbounds i8, ptr %1, i64 63 unreachable } In this way, the generated native code will just fall through to the next function, as LLVM does not generate any code for the unreachable IR instruction and leaves the function without a terminator. Zero the on-stack buffer to avoid this possible UB.(CVE-2024-53680) In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: bsg: Set bsg_queue to NULL after removal Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access.(CVE-2024-54458) In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Play nice with protected guests in complete_hypercall_exit() Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit hypercall when completing said hypercall. For guests with protected state, e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit mode as the vCPU state needed to detect 64-bit mode is unavailable. Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE hypercall via VMGEXIT trips the WARN: ------------[ cut here ]------------ WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm] Modules linked in: kvm_amd kvm ... [last unloaded: kvm] CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470 Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024 RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm] kvm_vcpu_ioctl+0x54f/0x630 [kvm] __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]---(CVE-2024-55881) In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Use snd_card_free_when_closed() at disconnection The USB disconnect callback is supposed to be short and not too-long waiting. OTOH, the current code uses snd_card_free() at disconnection, but this waits for the close of all used fds, hence it can take long. It eventually blocks the upper layer USB ioctls, which may trigger a soft lockup. An easy workaround is to replace snd_card_free() with snd_card_free_when_closed(). This variant returns immediately while the release of resources is done asynchronously by the card device release at the last close.(CVE-2024-56533) In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: streamline driver probe to avoid devres issues It was found that unloading 'hid_hyperv' module results in a devres complaint: ... hv_vmbus: unregistering driver hid_hyperv ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0 ... Call Trace: <TASK> ? devres_release_group+0x1f2/0x2c0 ? __warn+0xd1/0x1c0 ? devres_release_group+0x1f2/0x2c0 ? report_bug+0x32a/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? devres_release_group+0x1f2/0x2c0 ? devres_release_group+0x90/0x2c0 ? rcu_is_watching+0x15/0xb0 ? __pfx_devres_release_group+0x10/0x10 hid_device_remove+0xf5/0x220 device_release_driver_internal+0x371/0x540 ? klist_put+0xf3/0x170 bus_remove_device+0x1f1/0x3f0 device_del+0x33f/0x8c0 ? __pfx_device_del+0x10/0x10 ? cleanup_srcu_struct+0x337/0x500 hid_destroy_device+0xc8/0x130 mousevsc_remove+0xd2/0x1d0 [hid_hyperv] device_release_driver_internal+0x371/0x540 driver_detach+0xc5/0x180 bus_remove_driver+0x11e/0x2a0 ? __mutex_unlock_slowpath+0x160/0x5e0 vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus] ... And the issue seems to be that the corresponding devres group is not allocated. Normally, devres_open_group() is called from __hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver' with 'mousevsc_hid_driver' stub and basically re-implements __hid_device_probe() by calling hid_parse() and hid_hw_start() but not devres_open_group(). hid_device_probe() does not call __hid_device_probe() for it. Later, when the driver is removed, hid_device_remove() calls devres_release_group() as it doesn't check whether hdev->driver was initially overridden or not. The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") but the commit itself seems to be correct. Fix the issue by dropping the 'hid_dev->driver' override and using hid_register_driver()/hid_unregister_driver() instead. Alternatively, it would have been possible to rely on the default handling but HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work for mousevsc as-is.(CVE-2024-56545) In the Linux kernel, the following vulnerability has been resolved: nfsd: make sure exp active before svc_export_show The function `e_show` was called with protection from RCU. This only ensures that `exp` will not be freed. Therefore, the reference count for `exp` can drop to zero, which will trigger a refcount use-after-free warning when `exp_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `exp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 819 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 ... Call Trace: <TASK> e_show+0x20b/0x230 [nfsd] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e(CVE-2024-56558) In the Linux kernel, the following vulnerability has been resolved: mm/slub: Avoid list corruption when removing a slab from the full list Boot with slub_debug=UFPZ. If allocated object failed in alloc_consistency_checks, all objects of the slab will be marked as used, and then the slab will be removed from the partial list. When an object belonging to the slab got freed later, the remove_full() function is called. Because the slab is neither on the partial list nor on the full list, it eventually lead to a list corruption (actually a list poison being detected). So we need to mark and isolate the slab page with metadata corruption, do not put it back in circulation. Because the debug caches avoid all the fastpaths, reusing the frozen bit to mark slab page with metadata corruption seems to be fine. [ 4277.385669] list_del corruption, ffffea00044b3e50->next is LIST_POISON1 (dead000000000100) [ 4277.387023] ------------[ cut here ]------------ [ 4277.387880] kernel BUG at lib/list_debug.c:56! [ 4277.388680] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 4277.389562] CPU: 5 PID: 90 Comm: kworker/5:1 Kdump: loaded Tainted: G OE 6.6.1-1 #1 [ 4277.392113] Workqueue: xfs-inodegc/vda1 xfs_inodegc_worker [xfs] [ 4277.393551] RIP: 0010:__list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.394518] Code: 48 91 82 e8 37 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 28 49 91 82 e8 26 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 58 49 91 [ 4277.397292] RSP: 0018:ffffc90000333b38 EFLAGS: 00010082 [ 4277.398202] RAX: 000000000000004e RBX: ffffea00044b3e50 RCX: 0000000000000000 [ 4277.399340] RDX: 0000000000000002 RSI: ffffffff828f8715 RDI: 00000000ffffffff [ 4277.400545] RBP: ffffea00044b3e40 R08: 0000000000000000 R09: ffffc900003339f0 [ 4277.401710] R10: 0000000000000003 R11: ffffffff82d44088 R12: ffff888112cf9910 [ 4277.402887] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8881000424c0 [ 4277.404049] FS: 0000000000000000(0000) GS:ffff88842fd40000(0000) knlGS:0000000000000000 [ 4277.405357] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4277.406389] CR2: 00007f2ad0b24000 CR3: 0000000102a3a006 CR4: 00000000007706e0 [ 4277.407589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4277.408780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4277.410000] PKRU: 55555554 [ 4277.410645] Call Trace: [ 4277.411234] <TASK> [ 4277.411777] ? die+0x32/0x80 [ 4277.412439] ? do_trap+0xd6/0x100 [ 4277.413150] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.414158] ? do_error_trap+0x6a/0x90 [ 4277.414948] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.415915] ? exc_invalid_op+0x4c/0x60 [ 4277.416710] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.417675] ? asm_exc_invalid_op+0x16/0x20 [ 4277.418482] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.419466] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.420410] free_to_partial_list+0x515/0x5e0 [ 4277.421242] ? xfs_iext_remove+0x41a/0xa10 [xfs] [ 4277.422298] xfs_iext_remove+0x41a/0xa10 [xfs] [ 4277.423316] ? xfs_inodegc_worker+0xb4/0x1a0 [xfs] [ 4277.424383] xfs_bmap_del_extent_delay+0x4fe/0x7d0 [xfs] [ 4277.425490] __xfs_bunmapi+0x50d/0x840 [xfs] [ 4277.426445] xfs_itruncate_extents_flags+0x13a/0x490 [xfs] [ 4277.427553] xfs_inactive_truncate+0xa3/0x120 [xfs] [ 4277.428567] xfs_inactive+0x22d/0x290 [xfs] [ 4277.429500] xfs_inodegc_worker+0xb4/0x1a0 [xfs] [ 4277.430479] process_one_work+0x171/0x340 [ 4277.431227] worker_thread+0x277/0x390 [ 4277.431962] ? __pfx_worker_thread+0x10/0x10 [ 4277.432752] kthread+0xf0/0x120 [ 4277.433382] ? __pfx_kthread+0x10/0x10 [ 4277.434134] ret_from_fork+0x2d/0x50 [ 4277.434837] ? __pfx_kthread+0x10/0x10 [ 4277.435566] ret_from_fork_asm+0x1b/0x30 [ 4277.436280] </TASK>(CVE-2024-56566) In the Linux kernel, the following vulnerability has been resolved: efi/libstub: Free correct pointer on failure cmdline_ptr is an out parameter, which is not allocated by the function itself, and likely points into the caller's stack. cmdline refers to the pool allocation that should be freed when cleaning up after a failure, so pass this instead to free_pool().(CVE-2024-56573) In the Linux kernel, the following vulnerability has been resolved: media: ts2020: fix null-ptr-deref in ts2020_probe() KASAN reported a null-ptr-deref issue when executing the following command: # echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020] RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809 RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010 RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6 R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790 R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001 FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ts2020_probe+0xad/0xe10 [ts2020] i2c_device_probe+0x421/0xb40 really_probe+0x266/0x850 ... The cause of the problem is that when using sysfs to dynamically register an i2c device, there is no platform data, but the probe process of ts2020 needs to use platform data, resulting in a null pointer being accessed. Solve this problem by adding checks to platform data.(CVE-2024-56574) In the Linux kernel, the following vulnerability has been resolved: media: i2c: tc358743: Fix crash in the probe error path when using polling If an error occurs in the probe() function, we should remove the polling timer that was alarmed earlier, otherwise the timer is called with arguments that are already freed, which results in a crash. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 0 at kernel/time/timer.c:1830 __run_timers+0x244/0x268 Modules linked in: CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.11.0 #226 Hardware name: Diasom DS-RK3568-SOM-EVB (DT) pstate: 804000c9 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __run_timers+0x244/0x268 lr : __run_timers+0x1d4/0x268 sp : ffffff80eff2baf0 x29: ffffff80eff2bb50 x28: 7fffffffffffffff x27: ffffff80eff2bb00 x26: ffffffc080f669c0 x25: ffffff80efef6bf0 x24: ffffff80eff2bb00 x23: 0000000000000000 x22: dead000000000122 x21: 0000000000000000 x20: ffffff80efef6b80 x19: ffffff80041c8bf8 x18: ffffffffffffffff x17: ffffffc06f146000 x16: ffffff80eff27dc0 x15: 000000000000003e x14: 0000000000000000 x13: 00000000000054da x12: 0000000000000000 x11: 00000000000639c0 x10: 000000000000000c x9 : 0000000000000009 x8 : ffffff80eff2cb40 x7 : ffffff80eff2cb40 x6 : ffffff8002bee480 x5 : ffffffc080cb2220 x4 : ffffffc080cb2150 x3 : 00000000000f4240 x2 : 0000000000000102 x1 : ffffff80eff2bb00 x0 : ffffff80041c8bf0 Call trace:  __run_timers+0x244/0x268  timer_expire_remote+0x50/0x68  tmigr_handle_remote+0x388/0x39c  run_timer_softirq+0x38/0x44  handle_softirqs+0x138/0x298  __do_softirq+0x14/0x20  ____do_softirq+0x10/0x1c  call_on_irq_stack+0x24/0x4c  do_softirq_own_stack+0x1c/0x2c  irq_exit_rcu+0x9c/0xcc  el1_interrupt+0x48/0xc0  el1h_64_irq_handler+0x18/0x24  el1h_64_irq+0x7c/0x80  default_idle_call+0x34/0x68  do_idle+0x23c/0x294  cpu_startup_entry+0x38/0x3c  secondary_start_kernel+0x128/0x160  __secondary_switched+0xb8/0xbc ---[ end trace 0000000000000000 ]---(CVE-2024-56576) In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix null-ptr-deref during unload module The workqueue should be destroyed in mtk_jpeg_core.c since commit 09aea13ecf6f ("media: mtk-jpeg: refactor some variables"), otherwise the below calltrace can be easily triggered. [ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023 [ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] ... [ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ #17 ... [ 677.882838] pc : destroy_workqueue+0x3c/0x770 [ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.884314] sp : ffff80008ad974f0 [ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070 [ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690 [ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000 [ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0 [ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10 [ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d [ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90 [ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001 [ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000 [ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118 [ 677.893977] Call trace: [ 677.894297] destroy_workqueue+0x3c/0x770 [ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.895677] devm_action_release+0x50/0x90 [ 677.896211] release_nodes+0xe8/0x170 [ 677.896688] devres_release_all+0xf8/0x178 [ 677.897219] device_unbind_cleanup+0x24/0x170 [ 677.897785] device_release_driver_internal+0x35c/0x480 [ 677.898461] device_release_driver+0x20/0x38 ... [ 677.912665] ---[ end trace 0000000000000000 ]---(CVE-2024-56577) In the Linux kernel, the following vulnerability has been resolved: media: amphion: Set video drvdata before register video device The video drvdata should be set before the video device is registered, otherwise video_drvdata() may return NULL in the open() file ops, and led to oops.(CVE-2024-56579) In the Linux kernel, the following vulnerability has been resolved: leds: class: Protect brightness_show() with led_cdev->led_access mutex There is NULL pointer issue observed if from Process A where hid device being added which results in adding a led_cdev addition and later a another call to access of led_cdev attribute from Process B can result in NULL pointer issue. Use mutex led_cdev->led_access to protect access to led->cdev and its attribute inside brightness_show() and max_brightness_show() and also update the comment for mutex that it should be used to protect the led class device fields. Process A Process B kthread+0x114 worker_thread+0x244 process_scheduled_works+0x248 uhid_device_add_worker+0x24 hid_add_device+0x120 device_add+0x268 bus_probe_device+0x94 device_initial_probe+0x14 __device_attach+0xfc bus_for_each_drv+0x10c __device_attach_driver+0x14c driver_probe_device+0x3c __driver_probe_device+0xa0 really_probe+0x190 hid_device_probe+0x130 ps_probe+0x990 ps_led_register+0x94 devm_led_classdev_register_ext+0x58 led_classdev_register_ext+0x1f8 device_create_with_groups+0x48 device_create_groups_vargs+0xc8 device_add+0x244 kobject_uevent+0x14 kobject_uevent_env[jt]+0x224 mutex_unlock[jt]+0xc4 __mutex_unlock_slowpath+0xd4 wake_up_q+0x70 try_to_wake_up[jt]+0x48c preempt_schedule_common+0x28 __schedule+0x628 __switch_to+0x174 el0t_64_sync+0x1a8/0x1ac el0t_64_sync_handler+0x68/0xbc el0_svc+0x38/0x68 do_el0_svc+0x1c/0x28 el0_svc_common+0x80/0xe0 invoke_syscall+0x58/0x114 __arm64_sys_read+0x1c/0x2c ksys_read+0x78/0xe8 vfs_read+0x1e0/0x2c8 kernfs_fop_read_iter+0x68/0x1b4 seq_read_iter+0x158/0x4ec kernfs_seq_show+0x44/0x54 sysfs_kf_seq_show+0xb4/0x130 dev_attr_show+0x38/0x74 brightness_show+0x20/0x4c dualshock4_led_get_brightness+0xc/0x74 [ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 3313.874301][ T4013] Mem abort info: [ 3313.874303][ T4013] ESR = 0x0000000096000006 [ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits [ 3313.874307][ T4013] SET = 0, FnV = 0 [ 3313.874309][ T4013] EA = 0, S1PTW = 0 [ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault [ 3313.874313][ T4013] Data abort info: [ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000 .. [ 3313.874332][ T4013] Dumping ftrace buffer: [ 3313.874334][ T4013] (ftrace buffer empty) .. .. [ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader [ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74 [ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60 [ 3313.874656][ T4013] sp : ffffffc0b910bbd0 .. .. [ 3313.874685][ T4013] Call trace: [ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74 [ 3313.874690][ T4013] brightness_show+0x20/0x4c [ 3313.874692][ T4013] dev_attr_show+0x38/0x74 [ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130 [ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54 [ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec [ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4 [ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8 [ 3313.874711][ T4013] ksys_read+0x78/0xe8 [ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c [ 3313.874718][ T4013] invoke_syscall+0x58/0x114 [ 3313.874721][ T4013] el0_svc_common+0x80/0xe0 [ 3313.874724][ T4013] do_el0_svc+0x1c/0x28 [ 3313.874727][ T4013] el0_svc+0x38/0x68 [ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc [ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac(CVE-2024-56587) In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory.(CVE-2024-56593) In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error.(CVE-2024-56600) In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() sock_init_data() attaches the allocated sk object to the provided sock object. If ieee802154_create() fails later, the allocated sk object is freed, but the dangling pointer remains in the provided sock object, which may allow use-after-free. Clear the sk pointer in the sock object on error.(CVE-2024-56602) In the Linux kernel, the following vulnerability has been resolved: drm/dp_mst: Fix MST sideband message body length check Fix the MST sideband message body length check, which must be at least 1 byte accounting for the message body CRC (aka message data CRC) at the end of the message. This fixes a case where an MST branch device returns a header with a correct header CRC (indicating a correctly received body length), with the body length being incorrectly set to 0. This will later lead to a memory corruption in drm_dp_sideband_append_payload() and the following errors in dmesg: UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25 index -1 is out of range for type 'u8 [48]' Call Trace: drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper] drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper] drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper] memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256) Call Trace: drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper] drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper] drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper](CVE-2024-56616) In the Linux kernel, the following vulnerability has been resolved: can: dev: can_set_termination(): allow sleeping GPIOs In commit 6e86a1543c37 ("can: dev: provide optional GPIO based termination support") GPIO based termination support was added. For no particular reason that patch uses gpiod_set_value() to set the GPIO. This leads to the following warning, if the systems uses a sleeping GPIO, i.e. behind an I2C port expander: | WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c | CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the use of sleeping GPIOs.(CVE-2024-56625) In the Linux kernel, the following vulnerability has been resolved: LoongArch: Add architecture specific huge_pte_clear() When executing mm selftests run_vmtests.sh, there is such an error: BUG: Bad page state in process uffd-unit-tests pfn:00000 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0 flags: 0xffff0000002000(reserved|node=0|zone=0|lastcpupid=0xffff) raw: 00ffff0000002000 ffffbf0000000008 ffffbf0000000008 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Modules linked in: snd_seq_dummy snd_seq snd_seq_device rfkill vfat fat virtio_balloon efi_pstore virtio_net pstore net_failover failover fuse nfnetlink virtio_scsi virtio_gpu virtio_dma_buf dm_multipath efivarfs CPU: 2 UID: 0 PID: 1913 Comm: uffd-unit-tests Not tainted 6.12.0 #184 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 Stack : 900000047c8ac000 0000000000000000 9000000000223a7c 900000047c8ac000 900000047c8af690 900000047c8af698 0000000000000000 900000047c8af7d8 900000047c8af7d0 900000047c8af7d0 900000047c8af5b0 0000000000000001 0000000000000001 900000047c8af698 10b3c7d53da40d26 0000010000000000 0000000000000022 0000000fffffffff fffffffffe000000 ffff800000000000 000000000000002f 0000800000000000 000000017a6d4000 90000000028f8940 0000000000000000 0000000000000000 90000000025aa5e0 9000000002905000 0000000000000000 90000000028f8940 ffff800000000000 0000000000000000 0000000000000000 0000000000000000 9000000000223a94 000000012001839c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d ... Call Trace: [<9000000000223a94>] show_stack+0x5c/0x180 [<9000000001c3fd64>] dump_stack_lvl+0x6c/0xa0 [<900000000056aa08>] bad_page+0x1a0/0x1f0 [<9000000000574978>] free_unref_folios+0xbf0/0xd20 [<90000000004e65cc>] folios_put_refs+0x1a4/0x2b8 [<9000000000599a0c>] free_pages_and_swap_cache+0x164/0x260 [<9000000000547698>] tlb_batch_pages_flush+0xa8/0x1c0 [<9000000000547f30>] tlb_finish_mmu+0xa8/0x218 [<9000000000543cb8>] exit_mmap+0x1a0/0x360 [<9000000000247658>] __mmput+0x78/0x200 [<900000000025583c>] do_exit+0x43c/0xde8 [<9000000000256490>] do_group_exit+0x68/0x110 [<9000000000256554>] sys_exit_group+0x1c/0x20 [<9000000001c413b4>] do_syscall+0x94/0x130 [<90000000002216d8>] handle_syscall+0xb8/0x158 Disabling lock debugging due to kernel taint BUG: non-zero pgtables_bytes on freeing mm: -16384 On LoongArch system, invalid huge pte entry should be invalid_pte_table or a single _PAGE_HUGE bit rather than a zero value. And it should be the same with invalid pmd entry, since pmd_none() is called by function free_pgd_range() and pmd_none() return 0 by huge_pte_clear(). So single _PAGE_HUGE bit is also treated as a valid pte table and free_pte_range() will be called in free_pmd_range(). free_pmd_range() pmd = pmd_offset(pud, addr); do { next = pmd_addr_end(addr, end); if (pmd_none_or_clear_bad(pmd)) continue; free_pte_range(tlb, pmd, addr); } while (pmd++, addr = next, addr != end); Here invalid_pte_table is used for both invalid huge pte entry and pmd entry.(CVE-2024-56628) In the Linux kernel, the following vulnerability has been resolved: net: avoid potential UAF in default_operstate() syzbot reported an UAF in default_operstate() [1] Issue is a race between device and netns dismantles. After calling __rtnl_unlock() from netdev_run_todo(), we can not assume the netns of each device is still alive. Make sure the device is not in NETREG_UNREGISTERED state, and add an ASSERT_RTNL() before the call to __dev_get_by_index(). We might move this ASSERT_RTNL() in __dev_get_by_index() in the future. [1] BUG: KASAN: slab-use-after-free in __dev_get_by_index+0x5d/0x110 net/core/dev.c:852 Read of size 8 at addr ffff888043eba1b0 by task syz.0.0/5339 CPU: 0 UID: 0 PID: 5339 Comm: syz.0.0 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 __dev_get_by_index+0x5d/0x110 net/core/dev.c:852 default_operstate net/core/link_watch.c:51 [inline] rfc2863_policy+0x224/0x300 net/core/link_watch.c:67 linkwatch_do_dev+0x3e/0x170 net/core/link_watch.c:170 netdev_run_todo+0x461/0x1000 net/core/dev.c:10894 rtnl_unlock net/core/rtnetlink.c:152 [inline] rtnl_net_unlock include/linux/rtnetlink.h:133 [inline] rtnl_dellink+0x760/0x8d0 net/core/rtnetlink.c:3520 rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2541 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2a3cb80809 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2a3d9cd058 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2a3cd45fa0 RCX: 00007f2a3cb80809 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000008 RBP: 00007f2a3cbf393e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f2a3cd45fa0 R15: 00007ffd03bc65c8 </TASK> Allocated by task 5339: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kmalloc_array_noprof include/linux/slab.h:945 [inline] netdev_create_hash net/core/dev.c:11870 [inline] netdev_init+0x10c/0x250 net/core/dev.c:11890 ops_init+0x31e/0x590 net/core/net_namespace.c:138 setup_net+0x287/0x9e0 net/core/net_namespace.c:362 copy_net_ns+0x33f/0x570 net/core/net_namespace.c:500 create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228 ksys_unshare+0x57d/0xa70 kernel/fork.c:3314 __do_sys_unshare kernel/fork.c:3385 [inline] __se_sys_unshare kernel/fork.c:3383 [inline] __x64_sys_unshare+0x38/0x40 kernel/fork.c:3383 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x8 ---truncated---(CVE-2024-56635) In the Linux kernel, the following vulnerability has been resolved: geneve: do not assume mac header is set in geneve_xmit_skb() We should not assume mac header is set in output path. Use skb_eth_hdr() instead of eth_hdr() to fix the issue. sysbot reported the following : WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 skb_mac_header include/linux/skbuff.h:3052 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 eth_hdr include/linux/if_ether.h:24 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit_skb drivers/net/geneve.c:898 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Modules linked in: CPU: 0 UID: 0 PID: 11635 Comm: syz.4.1423 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_mac_header include/linux/skbuff.h:3052 [inline] RIP: 0010:eth_hdr include/linux/if_ether.h:24 [inline] RIP: 0010:geneve_xmit_skb drivers/net/geneve.c:898 [inline] RIP: 0010:geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Code: 21 c6 02 e9 35 d4 ff ff e8 a5 48 4c fb 90 0f 0b 90 e9 fd f5 ff ff e8 97 48 4c fb 90 0f 0b 90 e9 d8 f5 ff ff e8 89 48 4c fb 90 <0f> 0b 90 e9 41 e4 ff ff e8 7b 48 4c fb 90 0f 0b 90 e9 cd e7 ff ff RSP: 0018:ffffc90003b2f870 EFLAGS: 00010283 RAX: 000000000000037a RBX: 000000000000ffff RCX: ffffc9000dc3d000 RDX: 0000000000080000 RSI: ffffffff86428417 RDI: 0000000000000003 RBP: ffffc90003b2f9f0 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff88806603c000 R13: 0000000000000000 R14: ffff8880685b2780 R15: 0000000000000e23 FS: 00007fdc2deed6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30a1dff8 CR3: 0000000056b8c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] __dev_direct_xmit+0x58a/0x720 net/core/dev.c:4490 dev_direct_xmit include/linux/netdevice.h:3181 [inline] packet_xmit+0x1e4/0x360 net/packet/af_packet.c:285 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x2700/0x5660 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x488/0x4f0 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xe0/0x1c0 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f(CVE-2024-56636) In the Linux kernel, the following vulnerability has been resolved: dccp: Fix memory leak in dccp_feat_change_recv If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed. Here is the kmemleak stack for this: unreferenced object 0xffff88801d4ab488 (size 8): comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes): 01 b4 4a 1d 80 88 ff ff ..J..... backtrace: [<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1 Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.(CVE-2024-56643) In the Linux kernel, the following vulnerability has been resolved: net/ipv6: release expired exception dst cached in socket Dst objects get leaked in ip6_negative_advice() when this function is executed for an expired IPv6 route located in the exception table. There are several conditions that must be fulfilled for the leak to occur: * an ICMPv6 packet indicating a change of the MTU for the path is received, resulting in an exception dst being created * a TCP connection that uses the exception dst for routing packets must start timing out so that TCP begins retransmissions * after the exception dst expires, the FIB6 garbage collector must not run before TCP executes ip6_negative_advice() for the expired exception dst When TCP executes ip6_negative_advice() for an exception dst that has expired and if no other socket holds a reference to the exception dst, the refcount of the exception dst is 2, which corresponds to the increment made by dst_init() and the increment made by the TCP socket for which the connection is timing out. The refcount made by the socket is never released. The refcount of the dst is decremented in sk_dst_reset() but that decrement is counteracted by a dst_hold() intentionally placed just before the sk_dst_reset() in ip6_negative_advice(). After ip6_negative_advice() has finished, there is no other object tied to the dst. The socket lost its reference stored in sk_dst_cache and the dst is no longer in the exception table. The exception dst becomes a leaked object. As a result of this dst leak, an unbalanced refcount is reported for the loopback device of a net namespace being destroyed under kernels that do not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"): unregister_netdevice: waiting for lo to become free. Usage count = 2 Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The patch that introduced the dst_hold() in ip6_negative_advice() was 92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22 merely refactored the code with regards to the dst refcount so the issue was present even before 92f1655aa2b22. The bug was introduced in 54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually expired.") where the expired cached route is deleted and the sk_dst_cache member of the socket is set to NULL by calling dst_negative_advice() but the refcount belonging to the socket is left unbalanced. The IPv4 version - ipv4_negative_advice() - is not affected by this bug. When the TCP connection times out ipv4_negative_advice() merely resets the sk_dst_cache of the socket while decrementing the refcount of the exception dst.(CVE-2024-56644) In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_session_new(): fix skb reference counting Since j1939_session_skb_queue() does an extra skb_get() for each new skb, do the same for the initial one in j1939_session_new() to avoid refcount underflow. [mkl: clean up commit message](CVE-2024-56645) In the Linux kernel, the following vulnerability has been resolved: can: hi311x: hi3110_can_ist(): fix potential use-after-free The commit a22bd630cfff ("can: hi311x: do not report txerr and rxerr during bus-off") removed the reporting of rxerr and txerr even in case of correct operation (i. e. not bus-off). The error count information added to the CAN frame after netif_rx() is a potential use after free, since there is no guarantee that the skb is in the same state. It might be freed or reused. Fix the issue by postponing the netif_rx() call in case of txerr and rxerr reporting.(CVE-2024-56651) In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix race between element replace and close() Element replace (with a socket different from the one stored) may race with socket's close() link popping & unlinking. __sock_map_delete() unconditionally unrefs the (wrong) element: // set map[0] = s0 map_update_elem(map, 0, s0) // drop fd of s0 close(s0) sock_map_close() lock_sock(sk) (s0!) sock_map_remove_links(sk) link = sk_psock_link_pop() sock_map_unlink(sk, link) sock_map_delete_from_link // replace map[0] with s1 map_update_elem(map, 0, s1) sock_map_update_elem (s1!) lock_sock(sk) sock_map_update_common psock = sk_psock(sk) spin_lock(&stab->lock) osk = stab->sks[idx] sock_map_add_link(..., &stab->sks[idx]) sock_map_unref(osk, &stab->sks[idx]) psock = sk_psock(osk) sk_psock_put(sk, psock) if (refcount_dec_and_test(&psock)) sk_psock_drop(sk, psock) spin_unlock(&stab->lock) unlock_sock(sk) __sock_map_delete spin_lock(&stab->lock) sk = *psk // s1 replaced s0; sk == s1 if (!sk_test || sk_test == sk) // sk_test (s0) != sk (s1); no branch sk = xchg(psk, NULL) if (sk) sock_map_unref(sk, psk) // unref s1; sks[idx] will dangle psock = sk_psock(sk) sk_psock_put(sk, psock) if (refcount_dec_and_test()) sk_psock_drop(sk, psock) spin_unlock(&stab->lock) release_sock(sk) Then close(map) enqueues bpf_map_free_deferred, which finally calls sock_map_free(). This results in some refcount_t warnings along with a KASAN splat [1]. Fix __sock_map_delete(), do not allow sock_map_unref() on elements that may have been replaced. [1]: BUG: KASAN: slab-use-after-free in sock_map_free+0x10e/0x330 Write of size 4 at addr ffff88811f5b9100 by task kworker/u64:12/1063 CPU: 14 UID: 0 PID: 1063 Comm: kworker/u64:12 Not tainted 6.12.0+ #125 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Workqueue: events_unbound bpf_map_free_deferred Call Trace: <TASK> dump_stack_lvl+0x68/0x90 print_report+0x174/0x4f6 kasan_report+0xb9/0x190 kasan_check_range+0x10f/0x1e0 sock_map_free+0x10e/0x330 bpf_map_free_deferred+0x173/0x320 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x29e/0x360 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1202: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x85/0x90 kmem_cache_alloc_noprof+0x131/0x450 sk_prot_alloc+0x5b/0x220 sk_alloc+0x2c/0x870 unix_create1+0x88/0x8a0 unix_create+0xc5/0x180 __sock_create+0x241/0x650 __sys_socketpair+0x1ce/0x420 __x64_sys_socketpair+0x92/0x100 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 46: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kmem_cache_free+0x1a1/0x590 __sk_destruct+0x388/0x5a0 sk_psock_destroy+0x73e/0xa50 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x29e/0x360 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 The bu ---truncated---(CVE-2024-56664) In the Linux kernel, the following vulnerability has been resolved: powerpc/mm/fault: Fix kfence page fault reporting copy_from_kernel_nofault() can be called when doing read of /proc/kcore. /proc/kcore can have some unmapped kfence objects which when read via copy_from_kernel_nofault() can cause page faults. Since *_nofault() functions define their own fixup table for handling fault, use that instead of asking kfence to handle such faults. Hence we search the exception tables for the nip which generated the fault. If there is an entry then we let the fixup table handler handle the page fault by returning an error from within ___do_page_fault(). This can be easily triggered if someone tries to do dd from /proc/kcore. eg. dd if=/proc/kcore of=/dev/null bs=1M Some example false negatives: =============================== BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0 Invalid read at 0xc0000000fdff0000: copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0 Use-after-free read at 0xc0000000fe050000 (in kfence-#2): copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec(CVE-2024-56678) In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio' If platform_get_resource_byname() fails and returns NULL because DT lacks an 'mmio' property for the MHI endpoint, dereferencing res->start will cause a NULL pointer access. Add a check to prevent it. [kwilczynski: error message update per the review feedback] [bhelgaas: commit log](CVE-2024-56689) In the Linux kernel, the following vulnerability has been resolved: bpf: fix recursive lock when verdict program return SK_PASS When the stream_verdict program returns SK_PASS, it places the received skb into its own receive queue, but a recursive lock eventually occurs, leading to an operating system deadlock. This issue has been present since v6.9. ''' sk_psock_strp_data_ready write_lock_bh(&sk->sk_callback_lock) strp_data_ready strp_read_sock read_sock -> tcp_read_sock strp_recv cb.rcv_msg -> sk_psock_strp_read # now stream_verdict return SK_PASS without peer sock assign __SK_PASS = sk_psock_map_verd(SK_PASS, NULL) sk_psock_verdict_apply sk_psock_skb_ingress_self sk_psock_skb_ingress_enqueue sk_psock_data_ready read_lock_bh(&sk->sk_callback_lock) <= dead lock ''' This topic has been discussed before, but it has not been fixed. Previous discussion: https://lore.kernel.org/all/6684a5864ec86_403d20898@john.notmuch(CVE-2024-56694) In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dmac_flt.c Add error pointer checks after calling otx2_mbox_get_rsp().(CVE-2024-56707) In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_direct_read_write() The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked and pages remain pinned if ceph_alloc_sparse_ext_map() fails. There is no need to delay the allocation of sparse_ext map until after the bvecs array is set up, so fix this by moving sparse_ext allocation a bit earlier. Also, make a similar adjustment in __ceph_sync_read() for consistency (a leak of the same kind in __ceph_sync_read() has been addressed differently).(CVE-2024-56710) In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them.(CVE-2024-56723) In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them.(CVE-2024-56724) In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dcbnl.c Add error pointer check after calling otx2_mbox_get_rsp().(CVE-2024-56725) In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c Adding error pointer check after calling otx2_mbox_get_rsp().(CVE-2024-56727) In the Linux kernel, the following vulnerability has been resolved: ipv6: release nexthop on device removal The CI is hitting some aperiodic hangup at device removal time in the pmtu.sh self-test: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 6 ref_tracker: veth_A-R1@ffff888013df15d8 has 1/5 users at dst_init+0x84/0x4a0 dst_alloc+0x97/0x150 ip6_dst_alloc+0x23/0x90 ip6_rt_pcpu_alloc+0x1e6/0x520 ip6_pol_route+0x56f/0x840 fib6_rule_lookup+0x334/0x630 ip6_route_output_flags+0x259/0x480 ip6_dst_lookup_tail.constprop.0+0x5c2/0x940 ip6_dst_lookup_flow+0x88/0x190 udp_tunnel6_dst_lookup+0x2a7/0x4c0 vxlan_xmit_one+0xbde/0x4a50 [vxlan] vxlan_xmit+0x9ad/0xf20 [vxlan] dev_hard_start_xmit+0x10e/0x360 __dev_queue_xmit+0xf95/0x18c0 arp_solicit+0x4a2/0xe00 neigh_probe+0xaa/0xf0 While the first suspect is the dst_cache, explicitly tracking the dst owing the last device reference via probes proved such dst is held by the nexthop in the originating fib6_info. Similar to commit f5b51fe804ec ("ipv6: route: purge exception on removal"), we need to explicitly release the originating fib info when disconnecting a to-be-removed device from a live ipv6 dst: move the fib6_info cleanup into ip6_dst_ifdown(). Tested running: ./pmtu.sh cleanup_ipv6_exception in a tight loop for more than 400 iterations with no spat, running an unpatched kernel I observed a splat every ~10 iterations.(CVE-2024-56751) In the Linux kernel, the following vulnerability has been resolved: crypto: caam - Fix the pointer passed to caam_qi_shutdown() The type of the last parameter given to devm_add_action_or_reset() is "struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to "struct device *". Pass the correct parameter to devm_add_action_or_reset() so that the resources are released as expected.(CVE-2024-56754) In the Linux kernel, the following vulnerability has been resolved: btrfs: add a sanity check for btrfs root in btrfs_search_slot() Syzbot reports a null-ptr-deref in btrfs_search_slot(). The reproducer is using rescue=ibadroots, and the extent tree root is corrupted thus the extent tree is NULL. When scrub tries to search the extent tree to gather the needed extent info, btrfs_search_slot() doesn't check if the target root is NULL or not, resulting the null-ptr-deref. Add sanity check for btrfs root before using it in btrfs_search_slot().(CVE-2024-56774) In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Remove the direct link to net_device The similar patch in siw is in the link: https://git.kernel.org/rdma/rdma/c/16b87037b48889 This problem also occurred in RXE. The following analyze this problem. In the following Call Traces: " BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0 net/core/dev.c:8782 Read of size 4 at addr ffff8880554640b0 by task kworker/1:4/5295 CPU: 1 UID: 0 PID: 5295 Comm: kworker/1:4 Not tainted 6.12.0-rc3-syzkaller-00399-g9197b73fd7bb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: infiniband ib_cache_event_task Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 dev_get_flags+0x188/0x1d0 net/core/dev.c:8782 rxe_query_port+0x12d/0x260 drivers/infiniband/sw/rxe/rxe_verbs.c:60 __ib_query_port drivers/infiniband/core/device.c:2111 [inline] ib_query_port+0x168/0x7d0 drivers/infiniband/core/device.c:2143 ib_cache_update+0x1a9/0xb80 drivers/infiniband/core/cache.c:1494 ib_cache_event_task+0xf3/0x1e0 drivers/infiniband/core/cache.c:1568 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> " 1). In the link [1], " infiniband syz2: set down " This means that on 839.350575, the event ib_cache_event_task was sent andi queued in ib_wq. 2). In the link [1], " team0 (unregistering): Port device team_slave_0 removed " It indicates that before 843.251853, the net device should be freed. 3). In the link [1], " BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0 " This means that on 850.559070, this slab-use-after-free problem occurred. In all, on 839.350575, the event ib_cache_event_task was sent and queued in ib_wq, before 843.251853, the net device veth was freed. on 850.559070, this event was executed, and the mentioned freed net device was called. Thus, the above call trace occurred. [1] https://syzkaller.appspot.com/x/log.txt?x=12e7025f980000(CVE-2024-57795) In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Remove direct link to net_device Do not manage a per device direct link to net_device. Rely on associated ib_devices net_device management, not doubling the effort locally. A badly managed local link to net_device was causing a 'KASAN: slab-use-after-free' exception during siw_query_port() call.(CVE-2024-57857) In the Linux kernel, the following vulnerability has been resolved: iio: imu: kmx61: fix information leak in triggered buffer The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace.(CVE-2024-57908) In the Linux kernel, the following vulnerability has been resolved: iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer The 'data' array is allocated via kmalloc() and it is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Use kzalloc for the memory allocation to avoid pushing uninitialized information to userspace.(CVE-2024-57911) In the Linux kernel, the following vulnerability has been resolved: iio: pressure: zpa2326: fix information leak in triggered buffer The 'sample' local struct is used to push data to user space from a triggered buffer, but it has a hole between the temperature and the timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp). This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace.(CVE-2024-57912) In the Linux kernel, the following vulnerability has been resolved: dm array: fix releasing a faulty array block twice in dm_array_cursor_end When dm_bm_read_lock() fails due to locking or checksum errors, it releases the faulty block implicitly while leaving an invalid output pointer behind. The caller of dm_bm_read_lock() should not operate on this invalid dm_block pointer, or it will lead to undefined result. For example, the dm_array_cursor incorrectly caches the invalid pointer on reading a faulty array block, causing a double release in dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put(). Reproduce steps: 1. initialize a cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. wipe the second array block offline dmsteup remove cache cmeta cdata corig mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try reopen the cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" Kernel logs: (snip) device-mapper: array: array_block_check failed: blocknr 0 != wanted 10 device-mapper: block manager: array validator check failed for block 10 device-mapper: array: get_ablock failed device-mapper: cache metadata: dm_array_cursor_next for mapping failed ------------[ cut here ]------------ kernel BUG at drivers/md/dm-bufio.c:638! Fix by setting the cached block pointer to NULL on errors. In addition to the reproducer described above, this fix can be verified using the "array_cursor/damaged" test in dm-unit: dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR>(CVE-2024-57929) In the Linux kernel, the following vulnerability has been resolved: Revert "libfs: fix infinite directory reads for offset dir" The current directory offset allocator (based on mtree_alloc_cyclic) stores the next offset value to return in octx->next_offset. This mechanism typically returns values that increase monotonically over time. Eventually, though, the newly allocated offset value wraps back to a low number (say, 2) which is smaller than other already- allocated offset values. Yu Kuai <yukuai3@huawei.com> reports that, after commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir"), if a directory's offset allocator wraps, existing entries are no longer visible via readdir/getdents because offset_readdir() stops listing entries once an entry's offset is larger than octx->next_offset. These entries vanish persistently -- they can be looked up, but will never again appear in readdir(3) output. The reason for this is that the commit treats directory offsets as monotonically increasing integer values rather than opaque cookies, and introduces this comparison: if (dentry2offset(dentry) >= last_index) { On 64-bit platforms, the directory offset value upper bound is 2^63 - 1. Directory offsets will monotonically increase for millions of years without wrapping. On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator can wrap after only a few weeks (at worst). Revert commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir") to prepare for a fix that can work properly on 32-bit systems and might apply to recent LTS kernels where shmem employs the simple_offset mechanism.(CVE-2024-57952) In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: don't allow 1 packet limit The current implementation does not work correctly with a limit of 1. iproute2 actually checks for this and this patch adds the check in kernel as well. This fixes the following syzkaller reported crash: UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x125/0x19f lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:148 [inline] __ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347 sfq_link net/sched/sch_sfq.c:210 [inline] sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238 sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500 sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296 netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline] dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362 __dev_close_many+0x214/0x350 net/core/dev.c:1468 dev_close_many+0x207/0x510 net/core/dev.c:1506 unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738 unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695 unregister_netdevice include/linux/netdevice.h:2893 [inline] __tun_detach+0x6b6/0x1600 drivers/net/tun.c:689 tun_detach drivers/net/tun.c:705 [inline] tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640 __fput+0x203/0x840 fs/file_table.c:280 task_work_run+0x129/0x1b0 kernel/task_work.c:185 exit_task_work include/linux/task_work.h:33 [inline] do_exit+0x5ce/0x2200 kernel/exit.c:931 do_group_exit+0x144/0x310 kernel/exit.c:1046 __do_sys_exit_group kernel/exit.c:1057 [inline] __se_sys_exit_group kernel/exit.c:1055 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055 do_syscall_64+0x6c/0xd0 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7fe5e7b52479 Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f. RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0 R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270 The crash can be also be reproduced with the following (with a tc recompiled to allow for sfq limits of 1): tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s ../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1 ifconfig dummy0 up ping -I dummy0 -f -c2 -W0.1 8.8.8.8 sleep 1 Scenario that triggers the crash: * the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1 * TBF dequeues: it peeks from SFQ which moves the packet to the gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so it schedules itself for later. * the second packet is sent and TBF tries to queues it to SFQ. qdisc qlen is now 2 and because the SFQ limit is 1 the packet is dropped by SFQ. At this point qlen is 1, and all of the SFQ slots are empty, however q->tail is not NULL. At this point, assuming no more packets are queued, when sch_dequeue runs again it will decrement the qlen for the current empty slot causing an underflow and the subsequent out of bounds access.(CVE-2024-57996) In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW Power Hypervisor can possibily allocate MMIO window intersecting with Dynamic DMA Window (DDW) range, which is over 32-bit addressing. These MMIO pages needs to be marked as reserved so that IOMMU doesn't map DMA buffers in this range. The current code is not marking these pages correctly which is resulting in LPAR to OOPS while booting. The stack is at below BUG: Unable to handle kernel data access on read at 0xc00800005cd40000 Faulting instruction address: 0xc00000000005cdac Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod Supported: Yes, External CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries Workqueue: events work_for_cpu_fn NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000 REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001 CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800 GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000 GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000 GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800 GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8 GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800 NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100 LR [c00000000005e830] iommu_init_table+0x80/0x1e0 Call Trace: [c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable) [c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40 [c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230 [c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90 [c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80 [c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net] [c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110 [c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60 [c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620 [c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620 [c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150 [c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 There are 2 issues in the code 1. The index is "int" while the address is "unsigned long". This results in negative value when setting the bitmap. 2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit address). MMIO address needs to be page shifted as well.(CVE-2024-57999) In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Remove dangling pointers When an async control is written, we copy a pointer to the file handle that started the operation. That pointer will be used when the device is done. Which could be anytime in the future. If the user closes that file descriptor, its structure will be freed, and there will be one dangling pointer per pending async control, that the driver will try to use. Clean all the dangling pointers during release(). To avoid adding a performance penalty in the most common case (no async operation), a counter has been introduced with some logic to make sure that it is properly handled.(CVE-2024-58002) In the Linux kernel, the following vulnerability has been resolved: media: i2c: ds90ub9x3: Fix extra fwnode_handle_put() The ub913 and ub953 drivers call fwnode_handle_put(priv->sd.fwnode) as part of their remove process, and if the driver is removed multiple times, eventually leads to put "overflow", possibly causing memory corruption or crash. The fwnode_handle_put() is a leftover from commit 905f88ccebb1 ("media: i2c: ds90ub9x3: Fix sub-device matching"), which changed the code related to the sd.fwnode, but missed removing these fwnode_handle_put() calls.(CVE-2024-58003) In the Linux kernel, the following vulnerability has been resolved: soc: qcom: socinfo: Avoid out of bounds read of serial number On MSM8916 devices, the serial number exposed in sysfs is constant and does not change across individual devices. It's always: db410c:/sys/devices/soc0$ cat serial_number 2644893864 The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not have support for the serial_num field in the socinfo struct. There is an existing check to avoid exposing the serial number in that case, but it's not correct: When checking the item_size returned by SMEM, we need to make sure the *end* of the serial_num is within bounds, instead of comparing with the *start* offset. The serial_number currently exposed on MSM8916 devices is just an out of bounds read of whatever comes after the socinfo struct in SMEM. Fix this by changing offsetof() to offsetofend(), so that the size of the field is also taken into account.(CVE-2024-58007) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc A NULL sock pointer is passed into l2cap_sock_alloc() when it is called from l2cap_sock_new_connection_cb() and the error handling paths should also be aware of it. Seemingly a more elegant solution would be to swap bt_sock_alloc() and l2cap_chan_create() calls since they are not interdependent to that moment but then l2cap_chan_create() adds the soon to be deallocated and still dummy-initialized channel to the global list accessible by many L2CAP paths. The channel would be removed from the list in short period of time but be a bit more straight-forward here and just check for NULL instead of changing the order of function calls. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.(CVE-2024-58009) In the Linux kernel, the following vulnerability has been resolved: platform/x86: int3472: Check for adev == NULL Not all devices have an ACPI companion fwnode, so adev might be NULL. This can e.g. (theoretically) happen when a user manually binds one of the int3472 drivers to another i2c/platform device through sysfs. Add a check for adev not being set and return -ENODEV in that case to avoid a possible NULL pointer deref in skl_int3472_get_acpi_buffer().(CVE-2024-58011) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 Read of size 8 at addr ffff88814128f898 by task kworker/u9:4/5961 CPU: 1 UID: 0 PID: 5961 Comm: kworker/u9:4 Not tainted 6.12.0-syzkaller-10684-gf1cd565ce577 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 16026: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296 remove_adv_monitor+0x102/0x1b0 net/bluetooth/mgmt.c:5568 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 sock_write_iter+0x2d7/0x3f0 net/socket.c:1147 new_sync_write fs/read_write.c:586 [inline] vfs_write+0xaeb/0xd30 fs/read_write.c:679 ksys_write+0x18f/0x2b0 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 16022: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2338 [inline] slab_free mm/slub.c:4598 [inline] kfree+0x196/0x420 mm/slub.c:4746 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259 __mgmt_power_off+0x183/0x430 net/bluetooth/mgmt.c:9550 hci_dev_close_sync+0x6c4/0x11c0 net/bluetooth/hci_sync.c:5208 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline] hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508 sock_do_ioctl+0x158/0x460 net/socket.c:1209 sock_ioctl+0x626/0x8e0 net/socket.c:1328 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f(CVE-2024-58013) In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN() instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2024-58014) In the Linux kernel, the following vulnerability has been resolved: safesetid: check size of policy writes syzbot attempts to write a buffer with a large size to a sysfs entry with writes handled by handle_policy_update(), triggering a warning in kmalloc. Check the size specified for write buffers before allocating. [PM: subject tweak](CVE-2024-58016) In the Linux kernel, the following vulnerability has been resolved: printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which leads to undefined behavior. To prevent this, cast 1 to u32 before performing the shift, ensuring well-defined behavior. This change explicitly avoids any potential overflow by ensuring that the shift occurs on an unsigned 32-bit integer.(CVE-2024-58017) In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-sm6350: Add missing parent_map for two clocks If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for two clocks where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together.(CVE-2024-58076) In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix crash during unbind if gpio unit is in use We used the wrong device for the device managed functions. We used the usb device, when we should be using the interface device. If we unbind the driver from the usb interface, the cleanup functions are never called. In our case, the IRQ is never disabled. If an IRQ is triggered, it will try to access memory sections that are already free, causing an OOPS. We cannot use the function devm_request_threaded_irq here. The devm_* clean functions may be called after the main structure is released by uvc_delete. Luckily this bug has small impact, as it is only affected by devices with gpio units and the user has to unbind the device, a disconnect will not trigger this error.(CVE-2024-58079) In the Linux kernel, the following vulnerability has been resolved: KVM: Explicitly verify target vCPU is online in kvm_get_vcpu() Explicitly verify the target vCPU is fully online _prior_ to clamping the index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will generate '0', i.e. KVM will return vCPU0 instead of NULL. In practice, the bug is unlikely to cause problems, as it will only come into play if userspace or the guest is buggy or misbehaving, e.g. KVM may send interrupts to vCPU0 instead of dropping them on the floor. However, returning vCPU0 when it shouldn't exist per online_vcpus is problematic now that KVM uses an xarray for the vCPUs array, as KVM needs to insert into the xarray before publishing the vCPU to userspace (see commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")), i.e. before vCPU creation is guaranteed to succeed. As a result, incorrectly providing access to vCPU0 will trigger a use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu() bails out of vCPU creation due to an error and frees vCPU0. Commit afb2acb2e3a3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but in doing so introduced an unsolvable teardown conundrum. Preventing accesses to vCPU0 before it's fully online will allow reverting commit afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race.(CVE-2024-58083) In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Stop active perfmon if it is being destroyed If the active performance monitor (`v3d->active_perfmon`) is being destroyed, stop it first. Currently, the active perfmon is not stopped during destruction, leaving the `v3d->active_perfmon` pointer stale. This can lead to undefined behavior and instability. This patch ensures that the active perfmon is stopped before being destroyed, aligning with the behavior introduced in commit 7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed").(CVE-2024-58086) In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock when freeing cgroup storage The following commit bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]") first introduced deadlock prevention for fentry/fexit programs attaching on bpf_task_storage helpers. That commit also employed the logic in map free path in its v6 version. Later bpf_cgrp_storage was first introduced in c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs") which faces the same issue as bpf_task_storage, instead of its busy counter, NULL was passed to bpf_local_storage_map_free() which opened a window to cause deadlock: <TASK> (acquiring local_storage->lock) _raw_spin_lock_irqsave+0x3d/0x50 bpf_local_storage_update+0xd1/0x460 bpf_cgrp_storage_get+0x109/0x130 bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170 ? __bpf_prog_enter_recur+0x16/0x80 bpf_trampoline_6442485186+0x43/0xa4 cgroup_storage_ptr+0x9/0x20 (holding local_storage->lock) bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160 bpf_selem_unlink_storage+0x6f/0x110 bpf_local_storage_map_free+0xa2/0x110 bpf_map_free_deferred+0x5b/0x90 process_one_work+0x17c/0x390 worker_thread+0x251/0x360 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Progs: - A: SEC("fentry/cgroup_storage_ptr") - cgid (BPF_MAP_TYPE_HASH) Record the id of the cgroup the current task belonging to in this hash map, using the address of the cgroup as the map key. - cgrpa (BPF_MAP_TYPE_CGRP_STORAGE) If current task is a kworker, lookup the above hash map using function parameter @owner as the key to get its corresponding cgroup id which is then used to get a trusted pointer to the cgroup through bpf_cgroup_from_id(). This trusted pointer can then be passed to bpf_cgrp_storage_get() to finally trigger the deadlock issue. - B: SEC("tp_btf/sys_enter") - cgrpb (BPF_MAP_TYPE_CGRP_STORAGE) The only purpose of this prog is to fill Prog A's hash map by calling bpf_cgrp_storage_get() for as many userspace tasks as possible. Steps to reproduce: - Run A; - while (true) { Run B; Destroy B; } Fix this issue by passing its busy counter to the free procedure so it can be properly incremented before storage/smap locking.(CVE-2024-58088) In the Linux kernel, the following vulnerability has been resolved: sched/core: Prevent rescheduling when interrupts are disabled David reported a warning observed while loop testing kexec jump: Interrupts enabled after irqrouter_resume+0x0/0x50 WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220 kernel_kexec+0xf6/0x180 __do_sys_reboot+0x206/0x250 do_syscall_64+0x95/0x180 The corresponding interrupt flag trace: hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90 hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90 That means __up_console_sem() was invoked with interrupts enabled. Further instrumentation revealed that in the interrupt disabled section of kexec jump one of the syscore_suspend() callbacks woke up a task, which set the NEED_RESCHED flag. A later callback in the resume path invoked cond_resched() which in turn led to the invocation of the scheduler: __cond_resched+0x21/0x60 down_timeout+0x18/0x60 acpi_os_wait_semaphore+0x4c/0x80 acpi_ut_acquire_mutex+0x3d/0x100 acpi_ns_get_node+0x27/0x60 acpi_ns_evaluate+0x1cb/0x2d0 acpi_rs_set_srs_method_data+0x156/0x190 acpi_pci_link_set+0x11c/0x290 irqrouter_resume+0x54/0x60 syscore_resume+0x6a/0x200 kernel_kexec+0x145/0x1c0 __do_sys_reboot+0xeb/0x240 do_syscall_64+0x95/0x180 This is a long standing problem, which probably got more visible with the recent printk changes. Something does a task wakeup and the scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and invokes schedule() from a completely bogus context. The scheduler enables interrupts after context switching, which causes the above warning at the end. Quite some of the code paths in syscore_suspend()/resume() can result in triggering a wakeup with the exactly same consequences. They might not have done so yet, but as they share a lot of code with normal operations it's just a question of time. The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling models. Full preemption is not affected as cond_resched() is disabled and the preemption check preemptible() takes the interrupt disabled flag into account. Cure the problem by adding a corresponding check into cond_resched().(CVE-2024-58090) In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is used.(CVE-2025-21636) In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure.(CVE-2025-21637) In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: auth_enable: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure.(CVE-2025-21638) In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is used.(CVE-2025-21640) In the Linux kernel, the following vulnerability has been resolved: filemap: avoid truncating 64-bit offset to 32 bits On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a 64-bit value to 32 bits, leading to a possible infinite loop when writing to an xfs filesystem.(CVE-2025-21665) In the Linux kernel, the following vulnerability has been resolved: vsock: prevent null-ptr-deref in vsock_*[has_data|has_space] Recent reports have shown how we sometimes call vsock_*_has_data() when a vsock socket has been de-assigned from a transport (see attached links), but we shouldn't. Previous commits should have solved the real problems, but we may have more in the future, so to avoid null-ptr-deref, we can return 0 (no space, no data available) but with a warning. This way the code should continue to run in a nearly consistent state and have a warning that allows us to debug future problems.(CVE-2025-21666) In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: discard packets if the transport changes If the socket has been de-assigned or assigned to another transport, we must discard any packets received because they are not expected and would cause issues when we access vsk->transport. A possible scenario is described by Hyunwoo Kim in the attached link, where after a first connect() interrupted by a signal, and a second connect() failed, we can find `vsk->transport` at NULL, leading to a NULL pointer dereference.(CVE-2025-21669) In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Clear port select structure when fail to create Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]---(CVE-2025-21675) In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Ratelimit warning logs to prevent VM denial of service If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM.(CVE-2025-21690) In the Linux kernel, the following vulnerability has been resolved: net: sched: fix ets qdisc OOB Indexing Haowei Yan <g1042620637@gmail.com> found that ets_class_from_arg() can index an Out-Of-Bound class in ets_class_from_arg() when passed clid of 0. The overflow may cause local privilege escalation. [ 18.852298] ------------[ cut here ]------------ [ 18.853271] UBSAN: array-index-out-of-bounds in net/sched/sch_ets.c:93:20 [ 18.853743] index 18446744073709551615 is out of range for type 'ets_class [16]' [ 18.854254] CPU: 0 UID: 0 PID: 1275 Comm: poc Not tainted 6.12.6-dirty #17 [ 18.854821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 18.856532] Call Trace: [ 18.857441] <TASK> [ 18.858227] dump_stack_lvl+0xc2/0xf0 [ 18.859607] dump_stack+0x10/0x20 [ 18.860908] __ubsan_handle_out_of_bounds+0xa7/0xf0 [ 18.864022] ets_class_change+0x3d6/0x3f0 [ 18.864322] tc_ctl_tclass+0x251/0x910 [ 18.864587] ? lock_acquire+0x5e/0x140 [ 18.865113] ? __mutex_lock+0x9c/0xe70 [ 18.866009] ? __mutex_lock+0xa34/0xe70 [ 18.866401] rtnetlink_rcv_msg+0x170/0x6f0 [ 18.866806] ? __lock_acquire+0x578/0xc10 [ 18.867184] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 18.867503] netlink_rcv_skb+0x59/0x110 [ 18.867776] rtnetlink_rcv+0x15/0x30 [ 18.868159] netlink_unicast+0x1c3/0x2b0 [ 18.868440] netlink_sendmsg+0x239/0x4b0 [ 18.868721] ____sys_sendmsg+0x3e2/0x410 [ 18.869012] ___sys_sendmsg+0x88/0xe0 [ 18.869276] ? rseq_ip_fixup+0x198/0x260 [ 18.869563] ? rseq_update_cpu_node_id+0x10a/0x190 [ 18.869900] ? trace_hardirqs_off+0x5a/0xd0 [ 18.870196] ? syscall_exit_to_user_mode+0xcc/0x220 [ 18.870547] ? do_syscall_64+0x93/0x150 [ 18.870821] ? __memcg_slab_free_hook+0x69/0x290 [ 18.871157] __sys_sendmsg+0x69/0xd0 [ 18.871416] __x64_sys_sendmsg+0x1d/0x30 [ 18.871699] x64_sys_call+0x9e2/0x2670 [ 18.871979] do_syscall_64+0x87/0x150 [ 18.873280] ? do_syscall_64+0x93/0x150 [ 18.874742] ? lock_release+0x7b/0x160 [ 18.876157] ? do_user_addr_fault+0x5ce/0x8f0 [ 18.877833] ? irqentry_exit_to_user_mode+0xc2/0x210 [ 18.879608] ? irqentry_exit+0x77/0xb0 [ 18.879808] ? clear_bhb_loop+0x15/0x70 [ 18.880023] ? clear_bhb_loop+0x15/0x70 [ 18.880223] ? clear_bhb_loop+0x15/0x70 [ 18.880426] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 18.880683] RIP: 0033:0x44a957 [ 18.880851] Code: ff ff e8 fc 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 8974 24 10 [ 18.881766] RSP: 002b:00007ffcdd00fad8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 18.882149] RAX: ffffffffffffffda RBX: 00007ffcdd010db8 RCX: 000000000044a957 [ 18.882507] RDX: 0000000000000000 RSI: 00007ffcdd00fb70 RDI: 0000000000000003 [ 18.885037] RBP: 00007ffcdd010bc0 R08: 000000000703c770 R09: 000000000703c7c0 [ 18.887203] R10: 0000000000000080 R11: 0000000000000246 R12: 0000000000000001 [ 18.888026] R13: 00007ffcdd010da8 R14: 00000000004ca7d0 R15: 0000000000000001 [ 18.888395] </TASK> [ 18.888610] ---[ end trace ]---(CVE-2025-21692) In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Ensure job pointer is set to NULL after job completion After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished.(CVE-2025-21697) In the Linux kernel, the following vulnerability has been resolved: net: sched: Disallow replacing of child qdisc from one parent to another Lion Ackermann was able to create a UAF which can be abused for privilege escalation with the following script Step 1. create root qdisc tc qdisc add dev lo root handle 1:0 drr step2. a class for packet aggregation do demonstrate uaf tc class add dev lo classid 1:1 drr step3. a class for nesting tc class add dev lo classid 1:2 drr step4. a class to graft qdisc to tc class add dev lo classid 1:3 drr step5. tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024 step6. tc qdisc add dev lo parent 1:2 handle 3:0 drr step7. tc class add dev lo classid 3:1 drr step 8. tc qdisc add dev lo parent 3:1 handle 4:0 pfifo step 9. Display the class/qdisc layout tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 limit 1000p qdisc drr 3: dev lo parent 1:2 step10. trigger the bug <=== prevented by this patch tc qdisc replace dev lo parent 1:3 handle 4:0 step 11. Redisplay again the qdiscs/classes tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 1:3 root leaf 4: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p qdisc drr 3: dev lo parent 1:2 Observe that a) parent for 4:0 does not change despite the replace request. There can only be one parent. b) refcount has gone up by two for 4:0 and c) both class 1:3 and 3:1 are pointing to it. Step 12. send one packet to plug echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001)) step13. send one packet to the grafted fifo echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003)) step14. lets trigger the uaf tc class delete dev lo classid 1:3 tc class delete dev lo classid 1:1 The semantics of "replace" is for a del/add _on the same node_ and not a delete from one node(3:1) and add to another node (1:3) as in step10. While we could "fix" with a more complex approach there could be consequences to expectations so the patch takes the preventive approach of "disallow such config". Joint work with Lion Ackermann <nnamrec@gmail.com>(CVE-2025-21700) In the Linux kernel, the following vulnerability has been resolved: net: avoid race between device unregistration and ethnl ops The following trace can be seen if a device is being unregistered while its number of channels are being modified. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120 CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771 RIP: 0010:__mutex_lock+0xc8a/0x1120 Call Trace: <TASK> ethtool_check_max_channel+0x1ea/0x880 ethnl_set_channels+0x3c3/0xb10 ethnl_default_set_doit+0x306/0x650 genl_family_rcv_msg_doit+0x1e3/0x2c0 genl_rcv_msg+0x432/0x6f0 netlink_rcv_skb+0x13d/0x3b0 genl_rcv+0x28/0x40 netlink_unicast+0x42e/0x720 netlink_sendmsg+0x765/0xc20 __sys_sendto+0x3ac/0x420 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because unregister_netdevice_many_notify might run before the rtnl lock section of ethnl operations, eg. set_channels in the above example. In this example the rss lock would be destroyed by the device unregistration path before being used again, but in general running ethnl operations while dismantle has started is not a good idea. Fix this by denying any operation on devices being unregistered. A check was already there in ethnl_ops_begin, but not wide enough. Note that the same issue cannot be seen on the ioctl version (__dev_ethtool) because the device reference is retrieved from within the rtnl lock section there. Once dismantle started, the net device is unlisted and no reference will be found.(CVE-2025-21701) In the Linux kernel, the following vulnerability has been resolved: kernel: be more careful about dup_mmap() failures and uprobe registering If a memory allocation fails during dup_mmap(), the maple tree can be left in an unsafe state for other iterators besides the exit path. All the locks are dropped before the exit_mmap() call (in mm/mmap.c), but the incomplete mm_struct can be reached through (at least) the rmap finding the vmas which have a pointer back to the mm_struct. Up to this point, there have been no issues with being able to find an mm_struct that was only partially initialised. Syzbot was able to make the incomplete mm_struct fail with recent forking changes, so it has been proven unsafe to use the mm_struct that hasn't been initialised, as referenced in the link below. Although 8ac662f5da19f ("fork: avoid inappropriate uprobe access to invalid mm") fixed the uprobe access, it does not completely remove the race. This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the oom side (even though this is extremely unlikely to be selected as an oom victim in the race window), and sets MMF_UNSTABLE to avoid other potential users from using a partially initialised mm_struct. When registering vmas for uprobe, skip the vmas in an mm that is marked unstable. Modifying a vma in an unstable mm may cause issues if the mm isn't fully initialised.(CVE-2025-21709) In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct md_bitmap_stats"), following panic is reported: Oops: general protection fault, probably for non-canonical address RIP: 0010:bitmap_get_stats+0x2b/0xa0 Call Trace: <TASK> md_seq_show+0x2d2/0x5b0 seq_read_iter+0x2b9/0x470 seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6c/0xf0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that bitmap_get_stats() can be called at anytime if mddev is still there, even if bitmap is destroyed, or not fully initialized. Deferenceing bitmap in this case can crash the kernel. Meanwhile, the above commit start to deferencing bitmap->storage, make the problem easier to trigger. Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.(CVE-2025-21712) In the Linux kernel, the following vulnerability has been resolved: nilfs2: handle errors that nilfs_prepare_chunk() may return Patch series "nilfs2: fix issues with rename operations". This series fixes BUG_ON check failures reported by syzbot around rename operations, and a minor behavioral issue where the mtime of a child directory changes when it is renamed instead of moved. This patch (of 2): The directory manipulation routines nilfs_set_link() and nilfs_delete_entry() rewrite the directory entry in the folio/page previously read by nilfs_find_entry(), so error handling is omitted on the assumption that nilfs_prepare_chunk(), which prepares the buffer for rewriting, will always succeed for these. And if an error is returned, it triggers the legacy BUG_ON() checks in each routine. This assumption is wrong, as proven by syzbot: the buffer layer called by nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may fail due to metadata corruption or other reasons. This has been there all along, but improved sanity checks and error handling may have made it more reproducible in fuzzing tests. Fix this issue by adding missing error paths in nilfs_set_link(), nilfs_delete_entry(), and their caller nilfs_rename().(CVE-2025-21721) In the Linux kernel, the following vulnerability has been resolved: NFC: nci: Add bounds checking in nci_hci_create_pipe() The "pipe" variable is a u8 which comes from the network. If it's more than 127, then it results in memory corruption in the caller, nci_hci_connect_gate().(CVE-2025-21735) In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix use-after free in init error and remove paths devm_blk_crypto_profile_init() registers a cleanup handler to run when the associated (platform-) device is being released. For UFS, the crypto private data and pointers are stored as part of the ufs_hba's data structure 'struct ufs_hba::crypto_profile'. This structure is allocated as part of the underlying ufshcd and therefore Scsi_host allocation. During driver release or during error handling in ufshcd_pltfrm_init(), this structure is released as part of ufshcd_dealloc_host() before the (platform-) device associated with the crypto call above is released. Once this device is released, the crypto cleanup code will run, using the just-released 'struct ufs_hba::crypto_profile'. This causes a use-after-free situation: Call trace: kfree+0x60/0x2d8 (P) kvfree+0x44/0x60 blk_crypto_profile_destroy_callback+0x28/0x70 devm_action_release+0x1c/0x30 release_nodes+0x6c/0x108 devres_release_all+0x98/0x100 device_unbind_cleanup+0x20/0x70 really_probe+0x218/0x2d0 In other words, the initialisation code flow is: platform-device probe ufshcd_pltfrm_init() ufshcd_alloc_host() scsi_host_alloc() allocation of struct ufs_hba creation of scsi-host devices devm_blk_crypto_profile_init() devm registration of cleanup handler using platform-device and during error handling of ufshcd_pltfrm_init() or during driver removal: ufshcd_dealloc_host() scsi_host_put() put_device(scsi-host) release of struct ufs_hba put_device(platform-device) crypto cleanup handler To fix this use-after free, change ufshcd_alloc_host() to register a devres action to automatically cleanup the underlying SCSI device on ufshcd destruction, without requiring explicit calls to ufshcd_dealloc_host(). This way: * the crypto profile and all other ufs_hba-owned resources are destroyed before SCSI (as they've been registered after) * a memleak is plugged in tc-dwc-g210-pci.c remove() as a side-effect * EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as it's not needed anymore * no future drivers using ufshcd_alloc_host() could ever forget adding the cleanup(CVE-2025-21739) In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix DPE OoB read Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header.(CVE-2025-21741) In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately.(CVE-2025-21742) In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL.(CVE-2025-21744) In the Linux kernel, the following vulnerability has been resolved: Input: synaptics - fix crash when enabling pass-through port When enabling a pass-through port an interrupt might come before psmouse driver binds to the pass-through port. However synaptics sub-driver tries to access psmouse instance presumably associated with the pass-through port to figure out if only 1 byte of response or entire protocol packet needs to be forwarded to the pass-through port and may crash if psmouse instance has not been attached to the port yet. Fix the crash by introducing open() and close() methods for the port and check if the port is open before trying to access psmouse instance. Because psmouse calls serio_open() only after attaching psmouse instance to serio port instance this prevents the potential crash.(CVE-2025-21746) In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix integer overflows on 32 bit systems On 32bit systems the addition operations in ipc_msg_alloc() can potentially overflow leading to memory corruption. Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow.(CVE-2025-21748) In the Linux kernel, the following vulnerability has been resolved: net: rose: lock the socket in rose_bind() syzbot reported a soft lockup in rose_loopback_timer(), with a repro calling bind() from multiple threads. rose_bind() must lock the socket to avoid this issue.(CVE-2025-21749) In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free when attempting to join an aborted transaction When we are trying to join the current transaction and if it's aborted, we read its 'aborted' field after unlocking fs_info->trans_lock and without holding any extra reference count on it. This means that a concurrent task that is aborting the transaction may free the transaction before we read its 'aborted' field, leading to a use-after-free. Fix this by reading the 'aborted' field while holding fs_info->trans_lock since any freeing task must first acquire that lock and set fs_info->running_transaction to NULL before freeing the transaction. This was reported by syzbot and Dmitry with the following stack traces from KASAN: ================================================================== BUG: KASAN: slab-use-after-free in join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 Read of size 4 at addr ffff888011839024 by task kworker/u4:9/1128 CPU: 0 UID: 0 PID: 1128 Comm: kworker/u4:9 Not tainted 6.13.0-rc7-syzkaller-00019-gc45323b7560e #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 flush_space+0x448/0xcf0 fs/btrfs/space-info.c:803 btrfs_async_reclaim_data_space+0x159/0x510 fs/btrfs/space-info.c:1321 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5315: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] join_transaction+0x144/0xda0 fs/btrfs/transaction.c:308 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 btrfs_create_common+0x1b2/0x2e0 fs/btrfs/inode.c:6572 lookup_open fs/namei.c:3649 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x1c03/0x3590 fs/namei.c:3984 do_filp_open+0x27f/0x4e0 fs/namei.c:4014 do_sys_openat2+0x13e/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_creat fs/open.c:1495 [inline] __se_sys_creat fs/open.c:1489 [inline] __x64_sys_creat+0x123/0x170 fs/open.c:1489 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5336: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 cleanup_transaction fs/btrfs/transaction.c:2063 [inline] btrfs_commit_transaction+0x2c97/0x3720 fs/btrfs/transaction.c:2598 insert_balance_item+0x1284/0x20b0 fs/btrfs/volumes.c:3757 btrfs_balance+0x992/ ---truncated---(CVE-2025-21753) In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: add RCU protection to mld_newpack() mld_newpack() can be called without RTNL or RCU being held. Note that we no longer can use sock_alloc_send_skb() because ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep. Instead use alloc_skb() and charge the net->ipv6.igmp_sk socket under RCU protection.(CVE-2025-21758) In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: extend RCU protection in igmp6_send() igmp6_send() can be called without RTNL or RCU being held. Extend RCU protection so that we can safely fetch the net pointer and avoid a potential UAF. Note that we no longer can use sock_alloc_send_skb() because ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep. Instead use alloc_skb() and charge the net->ipv6.igmp_sk socket under RCU protection.(CVE-2025-21759) In the Linux kernel, the following vulnerability has been resolved: ndisc: extend RCU protection in ndisc_send_skb() ndisc_send_skb() can be called without RTNL or RCU held. Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu() and avoid a potential UAF.(CVE-2025-21760) In the Linux kernel, the following vulnerability has been resolved: openvswitch: use RCU protection in ovs_vport_cmd_fill_info() ovs_vport_cmd_fill_info() can be called without RTNL or RCU. Use RCU protection and dev_net_rcu() to avoid potential UAF.(CVE-2025-21761) In the Linux kernel, the following vulnerability has been resolved: arp: use RCU protection in arp_xmit() arp_xmit() can be called without RTNL or RCU protection. Use RCU protection to avoid potential UAF.(CVE-2025-21762) In the Linux kernel, the following vulnerability has been resolved: neighbour: use RCU protection in __neigh_notify() __neigh_notify() can be called without RTNL or RCU protection. Use RCU protection to avoid potential UAF.(CVE-2025-21763) In the Linux kernel, the following vulnerability has been resolved: ndisc: use RCU protection in ndisc_alloc_skb() ndisc_alloc_skb() can be called without RTNL or RCU being held. Add RCU protection to avoid possible UAF.(CVE-2025-21764) In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU protection in ip6_default_advmss() ip6_default_advmss() needs rcu protection to make sure the net structure it reads does not disappear.(CVE-2025-21765) In the Linux kernel, the following vulnerability has been resolved: ipv4: use RCU protection in __ip_rt_update_pmtu() __ip_rt_update_pmtu() must use RCU protection to make sure the net structure it reads does not disappear.(CVE-2025-21766) In the Linux kernel, the following vulnerability has been resolved: partitions: mac: fix handling of bogus partition table Fix several issues in partition probing: - The bailout for a bad partoffset must use put_dev_sector(), since the preceding read_part_sector() succeeded. - If the partition table claims a silly sector size like 0xfff bytes (which results in partition table entries straddling sector boundaries), bail out instead of accessing out-of-bounds memory. - We must not assume that the partition table contains proper NUL termination - use strnlen() and strncmp() instead of strlen() and strcmp().(CVE-2025-21772) In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: fix potential NULL pointer dereference on udev->serial The driver assumed that es58x_dev->udev->serial could never be NULL. While this is true on commercially available devices, an attacker could spoof the device identity providing a NULL USB serial number. That would trigger a NULL pointer dereference. Add a check on es58x_dev->udev->serial before accessing it.(CVE-2025-21773) In the Linux kernel, the following vulnerability has been resolved: can: ctucanfd: handle skb allocation failure If skb allocation fails, the pointer to struct can_frame is NULL. This is actually handled everywhere inside ctucan_err_interrupt() except for the only place. Add the missed NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.(CVE-2025-21775) In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and only if the local API is emulated/virtualized by KVM, and explicitly reject said hypercalls if the local APIC is emulated in userspace, i.e. don't rely on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID. Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if Hyper-V enlightenments are exposed to the guest without an in-kernel local APIC: dump_stack+0xbe/0xfd __kasan_report.cold+0x34/0x84 kasan_report+0x3a/0x50 __apic_accept_irq+0x3a/0x5c0 kvm_hv_send_ipi.isra.0+0x34e/0x820 kvm_hv_hypercall+0x8d9/0x9d0 kvm_emulate_hypercall+0x506/0x7e0 __vmx_handle_exit+0x283/0xb60 vmx_handle_exit+0x1d/0xd0 vcpu_enter_guest+0x16b0/0x24c0 vcpu_run+0xc0/0x550 kvm_arch_vcpu_ioctl_run+0x170/0x6d0 kvm_vcpu_ioctl+0x413/0xb20 __se_sys_ioctl+0x111/0x160 do_syscal1_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode can't be modified after vCPUs are created, i.e. if one vCPU has an in-kernel local APIC, then all vCPUs have an in-kernel local APIC.(CVE-2025-21779) In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table() It malicious user provides a small pptable through sysfs and then a bigger pptable, it may cause buffer overflow attack in function smu_sys_set_pp_table().(CVE-2025-21780) In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix panic during interface removal Reference counting is used to ensure that batadv_hardif_neigh_node and batadv_hard_iface are not freed before/during batadv_v_elp_throughput_metric_update work is finished. But there isn't a guarantee that the hard if will remain associated with a soft interface up until the work is finished. This fixes a crash triggered by reboot that looks like this: Call trace: batadv_v_mesh_free+0xd0/0x4dc [batman_adv] batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x178/0x398 worker_thread+0x2e8/0x4d0 kthread+0xd8/0xdc ret_from_fork+0x10/0x20 (the batadv_v_mesh_free call is misleading, and does not actually happen) I was able to make the issue happen more reliably by changing hardif_neigh->bat_v.metric_work work to be delayed work. This allowed me to track down and confirm the fix. [sven@narfation.org: prevent entering batadv_v_elp_get_throughput without soft_iface](CVE-2025-21781) In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode() In function psp_init_cap_microcode(), it should bail out when failed to load firmware, otherwise it may cause invalid memory access.(CVE-2025-21784) In the Linux kernel, the following vulnerability has been resolved: vxlan: check vxlan_vnigroup_init() return value vxlan_init() must check vxlan_vnigroup_init() success otherwise a crash happens later, spotted by syzbot. Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167] CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912 Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00 RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18 RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000 R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000 FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942 unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824 unregister_netdevice_many net/core/dev.c:11866 [inline] unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736 register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901 __vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981 vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407 rtnl_newlink_create net/core/rtnetlink.c:3795 [inline] __rtnl_newlink net/core/rtnetlink.c:3906 [inline](CVE-2025-21790) In the Linux kernel, the following vulnerability has been resolved: ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE socket option, a refcount leak will occur in ax25_release(). Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()") added decrement of device refcounts in ax25_release(). In order for that to work correctly the refcounts must already be incremented when the device is bound to the socket. An AX25 device can be bound to a socket by either calling ax25_bind() or setting SO_BINDTODEVICE socket option. In both cases the refcounts should be incremented, but in fact it is done only in ax25_bind(). This bug leads to the following issue reported by Syzkaller: ================================================================ refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31 Modules linked in: CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31 Call Trace: <TASK> __refcount_dec include/linux/refcount.h:336 [inline] refcount_dec include/linux/refcount.h:351 [inline] ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236 netdev_tracker_free include/linux/netdevice.h:4156 [inline] netdev_put include/linux/netdevice.h:4173 [inline] netdev_put include/linux/netdevice.h:4169 [inline] ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069 __sock_release+0xb0/0x270 net/socket.c:640 sock_close+0x1c/0x30 net/socket.c:1408 ... do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> ================================================================ Fix the implementation of ax25_setsockopt() by adding increment of refcounts for the new device bound, and decrement of refcounts for the old unbound device.(CVE-2025-21792) In the Linux kernel, the following vulnerability has been resolved: spi: sn-f-ospi: Fix division by zero When there is no dummy cycle in the spi-nor commands, both dummy bus cycle bytes and width are zero. Because of the cpu's warning when divided by zero, the warning should be avoided. Return just zero to avoid such calculations.(CVE-2025-21793) In the Linux kernel, the following vulnerability has been resolved: fbdev: omap: use threaded IRQ for LCD DMA When using touchscreen and framebuffer, Nokia 770 crashes easily with: BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000 Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2 Hardware name: Nokia 770 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x54/0x5c dump_stack_lvl from __schedule_bug+0x50/0x70 __schedule_bug from __schedule+0x4d4/0x5bc __schedule from schedule+0x34/0xa0 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4 __mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4 clk_prepare_lock from clk_set_rate+0x18/0x154 clk_set_rate from sossi_read_data+0x4c/0x168 sossi_read_data from hwa742_read_reg+0x5c/0x8c hwa742_read_reg from send_frame_handler+0xfc/0x300 send_frame_handler from process_pending_requests+0x74/0xd0 process_pending_requests from lcd_dma_irq_handler+0x50/0x74 lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130 __handle_irq_event_percpu from handle_irq_event+0x28/0x68 handle_irq_event from handle_level_irq+0x9c/0x170 handle_level_irq from generic_handle_domain_irq+0x2c/0x3c generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c generic_handle_arch_irq from call_with_stack+0x1c/0x24 call_with_stack from __irq_svc+0x94/0xa8 Exception stack(0xc5255da0 to 0xc5255de8) 5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248 5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94 5de0: 60000013 ffffffff __irq_svc from clk_prepare_lock+0x4c/0xe4 clk_prepare_lock from clk_get_rate+0x10/0x74 clk_get_rate from uwire_setup_transfer+0x40/0x180 uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664 spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498 __spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8 __spi_sync from spi_sync+0x24/0x40 spi_sync from ads7846_halfd_read_state+0x5c/0x1c0 ads7846_halfd_read_state from ads7846_irq+0x58/0x348 ads7846_irq from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x120/0x228 irq_thread from kthread+0xc8/0xe8 kthread from ret_from_fork+0x14/0x28 As a quick fix, switch to a threaded IRQ which provides a stable system.(CVE-2025-21821) In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject mismatching sum of field_len with set key length The field length description provides the length of each separated key field in the concatenation, each field gets rounded up to 32-bits to calculate the pipapo rule width from pipapo_init(). The set key length provides the total size of the key aligned to 32-bits. Register-based arithmetics still allows for combining mismatching set key length and field length description, eg. set key length 10 and field description [ 5, 4 ] leading to pipapo width of 12.(CVE-2025-21826) In the Linux kernel, the following vulnerability has been resolved: landlock: Handle weird files A corrupted filesystem (e.g. bcachefs) might return weird files. Instead of throwing a warning and allowing access to such file, treat them as regular files.(CVE-2025-21830) In the Linux kernel, the following vulnerability has been resolved: PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1 commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the policy that all PCIe ports are allowed to use D3. When the system is suspended if the port is not power manageable by the platform and won't be used for wakeup via a PME this sets up the policy for these ports to go into D3hot. This policy generally makes sense from an OSPM perspective but it leads to problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a specific old BIOS. This manifests as a system hang. On the affected Device + BIOS combination, add a quirk for the root port of the problematic controller to ensure that these root ports are not put into D3hot at suspend. This patch is based on https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com but with the added condition both in the documentation and in the code to apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only the affected root ports.(CVE-2025-21831) In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: fix MIDI Streaming descriptor lengths While the MIDI jacks are configured correctly, and the MIDIStreaming endpoint descriptors are filled with the correct information, bNumEmbMIDIJack and bLength are set incorrectly in these descriptors. This does not matter when the numbers of in and out ports are equal, but when they differ the host will receive broken descriptors with uninitialized stack memory leaking into the descriptor for whichever value is smaller. The precise meaning of "in" and "out" in the port counts is not clearly defined and can be confusing. But elsewhere the driver consistently uses this to match the USB meaning of IN and OUT viewed from the host, so that "in" ports send data to the host and "out" ports receive data from it.(CVE-2025-21835) In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: reallocate buf lists on upgrade IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it was created for legacy selected buffer and has been emptied. It violates the requirement that most of the field should stay stable after publish. Always reallocate it instead.(CVE-2025-21836) In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: flush gadget workqueue after device removal device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up.(CVE-2025-21838) In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference.(CVE-2025-21847) In the Linux kernel, the following vulnerability has been resolved: nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference.(CVE-2025-21848) In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Don't reference skb after sending to VIOS Previously, after successfully flushing the xmit buffer to VIOS, the tx_bytes stat was incremented by the length of the skb. It is invalid to access the skb memory after sending the buffer to the VIOS because, at any point after sending, the VIOS can trigger an interrupt to free this memory. A race between reading skb->len and freeing the skb is possible (especially during LPM) and will result in use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic] Read of size 4 at addr c00000024eb48a70 by task hxecom/14495 <...> Call Trace: [c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable) [c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0 [c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8 [c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0 [c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic] [c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358 <...> Freed by task 0: kasan_save_stack+0x34/0x68 kasan_save_track+0x2c/0x50 kasan_save_free_info+0x64/0x108 __kasan_mempool_poison_object+0x148/0x2d4 napi_skb_cache_put+0x5c/0x194 net_tx_action+0x154/0x5b8 handle_softirqs+0x20c/0x60c do_softirq_own_stack+0x6c/0x88 <...> The buggy address belongs to the object at c00000024eb48a00 which belongs to the cache skbuff_head_cache of size 224 ==================================================================(CVE-2025-21855) In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix error handling causing NULL dereference tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower](CVE-2025-21857) In the Linux kernel, the following vulnerability has been resolved: geneve: Fix use-after-free in geneve_find_dev(). syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac #24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_n ---truncated---(CVE-2025-21858) In the Linux kernel, the following vulnerability has been resolved: USB: gadget: f_midi: f_midi_complete to call queue_work When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler.(CVE-2025-21859) In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix incorrect initialization order Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller.(CVE-2025-21862) In the Linux kernel, the following vulnerability has been resolved: powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC Erhard reported the following KASAN hit while booting his PowerMac G4 with a KASAN-enabled kernel 6.13-rc6: BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8 Write of size 8 at addr f1000000 by task chronyd/1293 CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2 Tainted: [W]=WARN Hardware name: PowerMac3,6 7455 0x80010303 PowerMac Call Trace: [c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable) [c24375b0] [c0504998] print_report+0xdc/0x504 [c2437610] [c050475c] kasan_report+0xf8/0x108 [c2437690] [c0505a3c] kasan_check_range+0x24/0x18c [c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8 [c24376c0] [c004c014] patch_instructions+0x15c/0x16c [c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c [c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac [c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec [c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478 [c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14 [c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4 [c24379d0] [c027111c] do_seccomp+0x3dc/0x1890 [c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420 [c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c --- interrupt: c00 at 0x5a1274 NIP: 005a1274 LR: 006a3b3c CTR: 005296c8 REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4) MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000 GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932 GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57 GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002 GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001 NIP [005a1274] 0x5a1274 LR [006a3b3c] 0x6a3b3c --- interrupt: c00 The buggy address belongs to the virtual mapping at [f1000000, f1002000) created by: text_area_cpu_up+0x20/0x190 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30 flags: 0x80000000(zone=2) raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001 raw: 00000000 page dumped because: kasan: bad access detected Memory state around the buggy address: f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not initialised hence not supposed to be used yet. Powerpc text patching infrastructure allocates a virtual memory area using get_vm_area() and flags it as VM_ALLOC. But that flag is meant to be used for vmalloc() and vmalloc() allocated memory is not supposed to be used before a call to __vmalloc_node_range() which is never called for that area. That went undetected until commit e4137f08816b ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") The area allocated by text_area_cpu_up() is not vmalloc memory, it is mapped directly on demand when needed by map_kernel_page(). There is no VM flag corresponding to such usage, so just pass no flag. That way the area will be unpoisonned and usable immediately.(CVE-2025-21866) In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type() KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The cause of the issue was that eth_skb_pkt_type() accessed skb's data that didn't contain an Ethernet header. This occurs when bpf_prog_test_run_xdp() passes an invalid value as the user_data argument to bpf_test_init(). Fix this by returning an error when user_data is less than ETH_HLEN in bpf_test_init(). Additionally, remove the check for "if (user_size > size)" as it is unnecessary. [1] BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 __xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635 xdp_recv_frames net/bpf/test_run.c:272 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318 bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371 __sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777 __do_sys_bpf kernel/bpf/syscall.c:5866 [inline] __se_sys_bpf kernel/bpf/syscall.c:5864 [inline] __x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864 x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: free_pages_prepare mm/page_alloc.c:1056 [inline] free_unref_page+0x156/0x1320 mm/page_alloc.c:2657 __free_pages+0xa3/0x1b0 mm/page_alloc.c:4838 bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline] ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235 bpf_map_free kernel/bpf/syscall.c:838 [inline] bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310 worker_thread+0xedf/0x1550 kernel/workqueue.c:3391 kthread+0x535/0x6b0 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014(CVE-2025-21867) In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier(CVE-2025-21870) In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix supplicant wait loop OP-TEE supplicant is a user-space daemon and it's possible for it be hung or crashed or killed in the middle of processing an OP-TEE RPC call. It becomes more complicated when there is incorrect shutdown ordering of the supplicant process vs the OP-TEE client application which can eventually lead to system hang-up waiting for the closure of the client application. Allow the client process waiting in kernel for supplicant response to be killed rather than indefinitely waiting in an unkillable state. Also, a normal uninterruptible wait should not have resulted in the hung-task watchdog getting triggered, but the endless loop would. This fixes issues observed during system reboot/shutdown when supplicant got hung for some reason or gets crashed/killed which lead to client getting hung in an unkillable state. It in turn lead to system being in hung up state requiring hard power off/on to recover.(CVE-2025-21871) In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: bsg: Fix crash when arpmb command fails If the device doesn't support arpmb we'll crash due to copying user data in bsg_transport_sg_io_fn(). In the case where ufs_bsg_exec_advanced_rpmb_req() returns an error, do not set the job's reply_len. Memory crash backtrace: 3,1290,531166405,-;ufshcd 0000:00:12.5: ARPMB OP failed: error code -22 4,1308,531166555,-;Call Trace: 4,1309,531166559,-; <TASK> 4,1310,531166565,-; ? show_regs+0x6d/0x80 4,1311,531166575,-; ? die+0x37/0xa0 4,1312,531166583,-; ? do_trap+0xd4/0xf0 4,1313,531166593,-; ? do_error_trap+0x71/0xb0 4,1314,531166601,-; ? usercopy_abort+0x6c/0x80 4,1315,531166610,-; ? exc_invalid_op+0x52/0x80 4,1316,531166622,-; ? usercopy_abort+0x6c/0x80 4,1317,531166630,-; ? asm_exc_invalid_op+0x1b/0x20 4,1318,531166643,-; ? usercopy_abort+0x6c/0x80 4,1319,531166652,-; __check_heap_object+0xe3/0x120 4,1320,531166661,-; check_heap_object+0x185/0x1d0 4,1321,531166670,-; __check_object_size.part.0+0x72/0x150 4,1322,531166679,-; __check_object_size+0x23/0x30 4,1323,531166688,-; bsg_transport_sg_io_fn+0x314/0x3b0(CVE-2025-21873) In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix endpoint checking in genelink_bind() Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing. [1] Syzbot report: usb 5-1: Manufacturer: syz usb 5-1: SerialNumber: syz usb 5-1: config 0 descriptor?? gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ... ------------[ cut here ]------------ usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Modules linked in: CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:3827 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_resolve_output net/core/neighbour.c:1514 [inline] neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494 neigh_output include/net/neighbour.h:539 [inline] ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819 mld_send_cr net/ipv6/mcast.c:2120 [inline] mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651 process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK>(CVE-2025-21877) In the Linux kernel, the following vulnerability has been resolved: i2c: npcm: disable interrupt enable bit before devm_request_irq The customer reports that there is a soft lockup issue related to the i2c driver. After checking, the i2c module was doing a tx transfer and the bmc machine reboots in the middle of the i2c transaction, the i2c module keeps the status without being reset. Due to such an i2c module status, the i2c irq handler keeps getting triggered since the i2c irq handler is registered in the kernel booting process after the bmc machine is doing a warm rebooting. The continuous triggering is stopped by the soft lockup watchdog timer. Disable the interrupt enable bit in the i2c module before calling devm_request_irq to fix this issue since the i2c relative status bit is read-only. Here is the soft lockup log. [ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1] [ 28.183351] Modules linked in: [ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1 [ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.208128] pc : __do_softirq+0xb0/0x368 [ 28.212055] lr : __do_softirq+0x70/0x368 [ 28.215972] sp : ffffff8035ebca00 [ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780 [ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0 [ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b [ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff [ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000 [ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2 [ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250 [ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434 [ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198 [ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40 [ 28.290611] Call trace: [ 28.293052] __do_softirq+0xb0/0x368 [ 28.296625] __irq_exit_rcu+0xe0/0x100 [ 28.300374] irq_exit+0x14/0x20 [ 28.303513] handle_domain_irq+0x68/0x90 [ 28.307440] gic_handle_irq+0x78/0xb0 [ 28.311098] call_on_irq_stack+0x20/0x38 [ 28.315019] do_interrupt_handler+0x54/0x5c [ 28.319199] el1_interrupt+0x2c/0x4c [ 28.322777] el1h_64_irq_handler+0x14/0x20 [ 28.326872] el1h_64_irq+0x74/0x78 [ 28.330269] __setup_irq+0x454/0x780 [ 28.333841] request_threaded_irq+0xd0/0x1b4 [ 28.338107] devm_request_threaded_irq+0x84/0x100 [ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0 [ 28.346990] platform_probe+0x6c/0xc4 [ 28.350653] really_probe+0xcc/0x45c [ 28.354227] __driver_probe_device+0x8c/0x160 [ 28.358578] driver_probe_device+0x44/0xe0 [ 28.362670] __driver_attach+0x124/0x1d0 [ 28.366589] bus_for_each_dev+0x7c/0xe0 [ 28.370426] driver_attach+0x28/0x30 [ 28.373997] bus_add_driver+0x124/0x240 [ 28.377830] driver_register+0x7c/0x124 [ 28.381662] __platform_driver_register+0x2c/0x34 [ 28.386362] npcm_i2c_init+0x3c/0x5c [ 28.389937] do_one_initcall+0x74/0x230 [ 28.393768] kernel_init_freeable+0x24c/0x2b4 [ 28.398126] kernel_init+0x28/0x130 [ 28.401614] ret_from_fork+0x10/0x20 [ 28.405189] Kernel panic - not syncing: softlockup: hung tasks [ 28.411011] SMP: stopping secondary CPUs [ 28.414933] Kernel Offset: disabled [ 28.418412] CPU features: 0x00000000,00000802 [ 28.427644] Rebooting in 20 seconds..(CVE-2025-21878) In the Linux kernel, the following vulnerability has been resolved: uprobes: Reject the shared zeropage in uprobe_write_opcode() We triggered the following crash in syzkaller tests: BUG: Bad page state in process syz.7.38 pfn:1eff3 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3 flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff) raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x32/0x50 bad_page+0x69/0xf0 free_unref_page_prepare+0x401/0x500 free_unref_page+0x6d/0x1b0 uprobe_write_opcode+0x460/0x8e0 install_breakpoint.part.0+0x51/0x80 register_for_each_vma+0x1d9/0x2b0 __uprobe_register+0x245/0x300 bpf_uprobe_multi_link_attach+0x29b/0x4f0 link_create+0x1e2/0x280 __sys_bpf+0x75f/0xac0 __x64_sys_bpf+0x1a/0x30 do_syscall_64+0x56/0x100 entry_SYSCALL_64_after_hwframe+0x78/0xe2 BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1 The following syzkaller test case can be used to reproduce: r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8) write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10) r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0) mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0) r5 = userfaultfd(0x80801) ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20}) r6 = userfaultfd(0x80801) ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140)) ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2}) ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}}) r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94) bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40) The cause is that zero pfn is set to the PTE without increasing the RSS count in mfill_atomic_pte_zeropage() and the refcount of zero folio does not increase accordingly. Then, the operation on the same pfn is performed in uprobe_write_opcode()->__replace_page() to unconditional decrease the RSS count and old_folio's refcount. Therefore, two bugs are introduced: 1. The RSS count is incorrect, when process exit, the check_mm() report error "Bad rss-count". 2. The reserved folio (zero folio) is freed when folio->refcount is zero, then free_pages_prepare->free_page_is_bad() report error "Bad page state". There is more, the following warning could also theoretically be triggered: __replace_page() -> ... -> folio_remove_rmap_pte() -> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio) Considering that uprobe hit on the zero folio is a very rare case, just reject zero old folio immediately after get_user_page_vma_remote(). [ mingo: Cleaned up the changelog ](CVE-2025-21881) In the Linux kernel, the following vulnerability has been resolved: ice: Fix deinitializing VF in error path If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself).(CVE-2025-21883) In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also.(CVE-2025-21885) In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a WARN during dereg_mr for DM type Memory regions (MR) of type DM (device memory) do not have an associated umem. In the __mlx5_ib_dereg_mr() -> mlx5_free_priv_descs() flow, the code incorrectly takes the wrong branch, attempting to call dma_unmap_single() on a DMA address that is not mapped. This results in a WARN [1], as shown below. The issue is resolved by properly accounting for the DM type and ensuring the correct branch is selected in mlx5_free_priv_descs(). [1] WARNING: CPU: 12 PID: 1346 at drivers/iommu/dma-iommu.c:1230 iommu_dma_unmap_page+0x79/0x90 Modules linked in: ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry ovelay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 12 UID: 0 PID: 1346 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1631 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 49 3b 29 72 26 49 3b 69 08 73 20 4d 89 f0 44 89 e9 4c 89 e2 48 89 ee 48 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 07 b8 88 ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 66 0f 1f 44 00 RSP: 0018:ffffc90001913a10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810194b0a8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88810194b0a8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f537abdd740(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f537aeb8000 CR3: 000000010c248001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x84/0x190 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0xf8/0x1c0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 dma_unmap_page_attrs+0xe6/0x290 mlx5_free_priv_descs+0xb0/0xe0 [mlx5_ib] __mlx5_ib_dereg_mr+0x37e/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f537adaf17b Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffff218f0b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffff218f1d8 RCX: 00007f537adaf17b RDX: 00007ffff218f1c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffff218f1a0 R08: 00007f537aa8d010 R09: 0000561ee2e4f270 R10: 00007f537aace3a8 R11: 0000000000000246 R12: 00007ffff218f190 R13: 000000000000001c R14: 0000561ee2e4d7c0 R15: 00007ffff218f450 </TASK>(CVE-2025-21888) In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix the recovery flow of the UMR QP This patch addresses an issue in the recovery flow of the UMR QP, ensuring tasks do not get stuck, as highlighted by the call trace [1]. During recovery, before transitioning the QP to the RESET state, the software must wait for all outstanding WRs to complete. Failing to do so can cause the firmware to skip sending some flushed CQEs with errors and simply discard them upon the RESET, as per the IB specification. This race condition can result in lost CQEs and tasks becoming stuck. To resolve this, the patch sends a final WR which serves only as a barrier before moving the QP state to RESET. Once a CQE is received for that final WR, it guarantees that no outstanding WRs remain, making it safe to transition the QP to RESET and subsequently back to RTS, restoring proper functionality. Note: For the barrier WR, we simply reuse the failed and ready WR. Since the QP is in an error state, it will only receive IB_WC_WR_FLUSH_ERR. However, as it serves only as a barrier we don't care about its status. [1] INFO: task rdma_resource_l:1922 blocked for more than 120 seconds. Tainted: G W 6.12.0-rc7+ #1626 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:rdma_resource_l state:D stack:0 pid:1922 tgid:1922 ppid:1369 flags:0x00004004 Call Trace: <TASK> __schedule+0x420/0xd30 schedule+0x47/0x130 schedule_timeout+0x280/0x300 ? mark_held_locks+0x48/0x80 ? lockdep_hardirqs_on_prepare+0xe5/0x1a0 wait_for_completion+0x75/0x130 mlx5r_umr_post_send_wait+0x3c2/0x5b0 [mlx5_ib] ? __pfx_mlx5r_umr_done+0x10/0x10 [mlx5_ib] mlx5r_umr_revoke_mr+0x93/0xc0 [mlx5_ib] __mlx5_ib_dereg_mr+0x299/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? __lock_acquire+0x64e/0x2080 ? mark_held_locks+0x48/0x80 ? find_held_lock+0x2d/0xa0 ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? __fget_files+0xc3/0x1b0 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f99c918b17b RSP: 002b:00007ffc766d0468 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc766d0578 RCX: 00007f99c918b17b RDX: 00007ffc766d0560 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffc766d0540 R08: 00007f99c8f99010 R09: 000000000000bd7e R10: 00007f99c94c1c70 R11: 0000000000000246 R12: 00007ffc766d0530 R13: 000000000000001c R14: 0000000040246a80 R15: 0000000000000000 </TASK>(CVE-2025-21892) In the Linux kernel, the following vulnerability has been resolved: perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same perf_event_pmu_context, but not in the same order. The problem is that the order of pmu_ctx_list for the parent is impacted by the time when an event/PMU is added. While the order for a child is impacted by the event order in the pinned_groups and flexible_groups. So the order of pmu_ctx_list in the parent and child may be different. To fix this problem, insert the perf_event_pmu_context to its proper place after iteration of the pmu_ctx_list. The follow testcase can trigger above warning: # perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out & # perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out test.c void main() { int count = 0; pid_t pid; printf("%d running\n", getpid()); sleep(30); printf("running\n"); pid = fork(); if (pid == -1) { printf("fork error\n"); return; } if (pid == 0) { while (1) { count++; } } else { while (1) { count++; } } } The testcase first opens an LBR event, so it will allocate task_ctx_data, and then open tracepoint and software events, so the parent context will have 3 different perf_event_pmu_contexts. On inheritance, child ctx will insert the perf_event_pmu_context in another order and the warning will trigger. [ mingo: Tidied up the changelog. ](CVE-2025-21895) In the Linux kernel, the following vulnerability has been resolved: ftrace: Avoid potential division by zero in function_stat_show() Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64} produce zero and skip stddev computation in that case. For now don't care about rec->counter * rec->counter overflow because rec->time * rec->time overflow will likely happen earlier.(CVE-2025-21898) In the Linux kernel, the following vulnerability has been resolved: tracing: Fix bad hist from corrupting named_triggers list The following commands causes a crash: ~# cd /sys/kernel/tracing/events/rcu/rcu_callback ~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=bad:keys=common_pid' > trigger Because the following occurs: event_trigger_write() { trigger_process_regex() { event_hist_trigger_parse() { data = event_trigger_alloc(..); event_trigger_register(.., data) { cmd_ops->reg(.., data, ..) [hist_register_trigger()] { data->ops->init() [event_hist_trigger_init()] { save_named_trigger(name, data) { list_add(&data->named_list, &named_triggers); } } } } ret = create_actions(); (return -EINVAL) if (ret) goto out_unreg; [..] ret = hist_trigger_enable(data, ...) { list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!) [..] out_unreg: event_hist_unregister(.., data) { cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] { list_for_each_entry(iter, &file->triggers, list) { if (!hist_trigger_match(data, iter, named_data, false)) <- never matches continue; [..] test = iter; } if (test && test->ops->free) <<<-- test is NULL test->ops->free(test) [event_hist_trigger_free()] { [..] if (data->name) del_named_trigger(data) { list_del(&data->named_list); <<<<-- NEVER gets removed! } } } } [..] kfree(data); <<<-- frees item but it is still on list The next time a hist with name is registered, it causes an u-a-f bug and the kernel can crash. Move the code around such that if event_trigger_register() succeeds, the next thing called is hist_trigger_enable() which adds it to the list. A bunch of actions is called if get_named_trigger_data() returns false. But that doesn't need to be called after event_trigger_register(), so it can be moved up, allowing event_trigger_register() to be called just before hist_trigger_enable() keeping them together and allowing the file->triggers to be properly populated.(CVE-2025-21899) In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: regulatory: improve invalid hints checking Syzbot keeps reporting an issue [1] that occurs when erroneous symbols sent from userspace get through into user_alpha2[] via regulatory_hint_user() call. Such invalid regulatory hints should be rejected. While a sanity check from commit 47caf685a685 ("cfg80211: regulatory: reject invalid hints") looks to be enough to deter these very cases, there is a way to get around it due to 2 reasons. 1) The way isalpha() works, symbols other than latin lower and upper letters may be used to determine a country/domain. For instance, greek letters will also be considered upper/lower letters and for such characters isalpha() will return true as well. However, ISO-3166-1 alpha2 codes should only hold latin characters. 2) While processing a user regulatory request, between reg_process_hint_user() and regulatory_hint_user() there happens to be a call to queue_regulatory_request() which modifies letters in request->alpha2[] with toupper(). This works fine for latin symbols, less so for weird letter characters from the second part of _ctype[]. Syzbot triggers a warning in is_user_regdom_saved() by first sending over an unexpected non-latin letter that gets malformed by toupper() into a character that ends up failing isalpha() check. Prevent this by enhancing is_an_alpha2() to ensure that incoming symbols are latin letters and nothing else. [1] Syzbot report: ------------[ cut here ]------------ Unexpected user alpha2: A� WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 Modules linked in: CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events_power_efficient crda_timeout_work RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline] RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline] RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 ... Call Trace: <TASK> crda_timeout_work+0x27/0x50 net/wireless/reg.c:542 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK>(CVE-2025-21910) In the Linux kernel, the following vulnerability has been resolved: slimbus: messaging: Free transaction ID in delayed interrupt scenario In case of interrupt delay for any reason, slim_do_transfer() returns timeout error but the transaction ID (TID) is not freed. This results into invalid memory access inside qcom_slim_ngd_rx_msgq_cb() due to invalid TID. Fix the issue by freeing the TID in slim_do_transfer() before returning timeout error to avoid invalid memory access. Call trace: __memcpy_fromio+0x20/0x190 qcom_slim_ngd_rx_msgq_cb+0x130/0x290 [slim_qcom_ngd_ctrl] vchan_complete+0x2a0/0x4a0 tasklet_action_common+0x274/0x700 tasklet_action+0x28/0x3c _stext+0x188/0x620 run_ksoftirqd+0x34/0x74 smpboot_thread_fn+0x1d8/0x464 kthread+0x178/0x238 ret_from_fork+0x10/0x20 Code: aa0003e8 91000429 f100044a 3940002b (3800150b) ---[ end trace 0fe00bec2b975c99 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt.(CVE-2025-21914) In the Linux kernel, the following vulnerability has been resolved: HID: hid-steam: Fix use-after-free when detaching device When a hid-steam device is removed it must clean up the client_hdev used for intercepting hidraw access. This can lead to scheduling deferred work to reattach the input device. Though the cleanup cancels the deferred work, this was done before the client_hdev itself is cleaned up, so it gets rescheduled. This patch fixes the ordering to make sure the deferred work is properly canceled.(CVE-2025-21923) In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu() nvme_tcp_recv_pdu() doesn't check the validity of the header length. When header digests are enabled, a target might send a packet with an invalid header length (e.g. 255), causing nvme_tcp_verify_hdgst() to access memory outside the allocated area and cause memory corruptions by overwriting it with the calculated digest. Fix this by rejecting packets with an unexpected header length.(CVE-2025-21927) In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove() The system can experience a random crash a few minutes after the driver is removed. This issue occurs due to improper handling of memory freeing in the ishtp_hid_remove() function. The function currently frees the `driver_data` directly within the loop that destroys the HID devices, which can lead to accessing freed memory. Specifically, `hid_destroy_device()` uses `driver_data` when it calls `hid_ishtp_set_feature()` to power off the sensor, so freeing `driver_data` beforehand can result in accessing invalid memory. This patch resolves the issue by storing the `driver_data` in a temporary variable before calling `hid_destroy_device()`, and then freeing the `driver_data` after the device is destroyed.(CVE-2025-21928) In the Linux kernel, the following vulnerability has been resolved: rapidio: add check for rio_add_net() in rio_scan_alloc_net() The return value of rio_add_net() should be checked. If it fails, put_device() should be called to free the memory and give up the reference initialized in rio_add_net().(CVE-2025-21935) In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params Null pointer dereference issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not null before accessing. This prevents a null pointer dereference. Found by code review. (cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)(CVE-2025-21941) In the Linux kernel, the following vulnerability has been resolved: gpio: aggregator: protect driver attr handlers against module unload Both new_device_store and delete_device_store touch module global resources (e.g. gpio_aggregator_lock). To prevent race conditions with module unload, a reference needs to be held. Add try_module_get() in these handlers. For new_device_store, this eliminates what appears to be the most dangerous scenario: if an id is allocated from gpio_aggregator_idr but platform_device_register has not yet been called or completed, a concurrent module unload could fail to unregister/delete the device, leaving behind a dangling platform device/GPIO forwarder. This can result in various issues. The following simple reproducer demonstrates these problems: #!/bin/bash while :; do # note: whether 'gpiochip0 0' exists or not does not matter. echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device done & while :; do modprobe gpio-aggregator modprobe -r gpio-aggregator done & wait Starting with the following warning, several kinds of warnings will appear and the system may become unstable: ------------[ cut here ]------------ list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100) WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120 [...] RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120 [...] Call Trace: <TASK> ? __list_del_entry_valid_or_report+0xa3/0x120 ? __warn.cold+0x93/0xf2 ? __list_del_entry_valid_or_report+0xa3/0x120 ? report_bug+0xe6/0x170 ? __irq_work_queue_local+0x39/0xe0 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? __list_del_entry_valid_or_report+0xa3/0x120 gpiod_remove_lookup_table+0x22/0x60 new_device_store+0x315/0x350 [gpio_aggregator] kernfs_fop_write_iter+0x137/0x1f0 vfs_write+0x262/0x430 ksys_write+0x60/0xd0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]---(CVE-2025-21943) In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds in parse_sec_desc() If osidoffset, gsidoffset and dacloffset could be greater than smb_ntsd struct size. If it is smaller, It could cause slab-out-of-bounds. And when validating sid, It need to check it included subauth array size.(CVE-2025-21946) In the Linux kernel, the following vulnerability has been resolved: LoongArch: Set hugetlb mmap base address aligned with pmd size With ltp test case "testcases/bin/hugefork02", there is a dmesg error report message such as: kernel BUG at mm/hugetlb.c:5550! Oops - BUG[#1]: CPU: 0 UID: 0 PID: 1517 Comm: hugefork02 Not tainted 6.14.0-rc2+ #241 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000004eaf1c ra 9000000000485538 tp 900000010edbc000 sp 900000010edbf940 a0 900000010edbfb00 a1 9000000108d20280 a2 00007fffe9474000 a3 00007ffff3474000 a4 0000000000000000 a5 0000000000000003 a6 00000000003cadd3 a7 0000000000000000 t0 0000000001ffffff t1 0000000001474000 t2 900000010ecd7900 t3 00007fffe9474000 t4 00007fffe9474000 t5 0000000000000040 t6 900000010edbfb00 t7 0000000000000001 t8 0000000000000005 u0 90000000004849d0 s9 900000010edbfa00 s0 9000000108d20280 s1 00007fffe9474000 s2 0000000002000000 s3 9000000108d20280 s4 9000000002b38b10 s5 900000010edbfb00 s6 00007ffff3474000 s7 0000000000000406 s8 900000010edbfa08 ra: 9000000000485538 unmap_vmas+0x130/0x218 ERA: 90000000004eaf1c __unmap_hugepage_range+0x6f4/0x7d0 PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Process hugefork02 (pid: 1517, threadinfo=00000000a670eaf4, task=000000007a95fc64) Call Trace: [<90000000004eaf1c>] __unmap_hugepage_range+0x6f4/0x7d0 [<9000000000485534>] unmap_vmas+0x12c/0x218 [<9000000000494068>] exit_mmap+0xe0/0x308 [<900000000025fdc4>] mmput+0x74/0x180 [<900000000026a284>] do_exit+0x294/0x898 [<900000000026aa30>] do_group_exit+0x30/0x98 [<900000000027bed4>] get_signal+0x83c/0x868 [<90000000002457b4>] arch_do_signal_or_restart+0x54/0xfa0 [<90000000015795e8>] irqentry_exit_to_user_mode+0xb8/0x138 [<90000000002572d0>] tlb_do_page_fault_1+0x114/0x1b4 The problem is that base address allocated from hugetlbfs is not aligned with pmd size. Here add a checking for hugetlbfs and align base address with pmd size. After this patch the test case "testcases/bin/hugefork02" passes to run. This is similar to the commit 7f24cbc9c4d42db8a3c8484d1 ("mm/mmap: teach generic_get_unmapped_area{_topdown} to handle hugetlb mappings").(CVE-2025-21949) In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acdirmax mount option User-provided mount parameter acdirmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2025-21963) In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acregmax mount option User-provided mount parameter acregmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2025-21964) In the Linux kernel, the following vulnerability has been resolved: fbdev: hyperv_fb: Allow graceful removal of framebuffer When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to release the framebuffer forcefully. If this framebuffer is in use it produce the following WARN and hence this framebuffer is never released. [ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40 < snip > [ 44.111289] Call Trace: [ 44.111290] <TASK> [ 44.111291] ? show_regs+0x6c/0x80 [ 44.111295] ? __warn+0x8d/0x150 [ 44.111298] ? framebuffer_release+0x2c/0x40 [ 44.111300] ? report_bug+0x182/0x1b0 [ 44.111303] ? handle_bug+0x6e/0xb0 [ 44.111306] ? exc_invalid_op+0x18/0x80 [ 44.111308] ? asm_exc_invalid_op+0x1b/0x20 [ 44.111311] ? framebuffer_release+0x2c/0x40 [ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb] [ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus] [ 44.111323] device_remove+0x40/0x80 [ 44.111325] device_release_driver_internal+0x20b/0x270 [ 44.111327] ? bus_find_device+0xb3/0xf0 Fix this by moving the release of framebuffer and assosiated memory to fb_ops.fb_destroy function, so that framebuffer framework handles it gracefully. While we fix this, also replace manual registrations/unregistration of framebuffer with devm_register_framebuffer.(CVE-2025-21976) In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: Fix address space leak when Hyper-V DRM device is removed When a Hyper-V DRM device is probed, the driver allocates MMIO space for the vram, and maps it cacheable. If the device removed, or in the error path for device probing, the MMIO space is released but no unmap is done. Consequently the kernel address space for the mapping is leaked. Fix this by adding iounmap() calls in the device removal path, and in the error path during device probing.(CVE-2025-21978) In the Linux kernel, the following vulnerability has been resolved: iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() When performing an iSCSI boot using IPv6, iscsistart still reads the /sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix length is 64, this causes the shift exponent to become negative, triggering a UBSAN warning. As the concept of a subnet mask does not apply to IPv6, the value is set to ~0 to suppress the warning message.(CVE-2025-21993) In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix incorrect validation for num_aces field of smb_acl parse_dcal() validate num_aces to allocate posix_ace_state_array. if (num_aces > ULONG_MAX / sizeof(struct smb_ace *)) It is an incorrect validation that we can create an array of size ULONG_MAX. smb_acl has ->size field to calculate actual number of aces in request buffer size. Use this to check invalid num_aces.(CVE-2025-21994) In the Linux kernel, the following vulnerability has been resolved: proc: fix UAF in proc_get_inode() Fix race between rmmod and /proc/XXX's inode instantiation. The bug is that pde->proc_ops don't belong to /proc, it belongs to a module, therefore dereferencing it after /proc entry has been registered is a bug unless use_pde/unuse_pde() pair has been used. use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops never changes so information necessary for inode instantiation can be saved _before_ proc_register() in PDE itself and used later, avoiding pde->proc_ops->... dereference. rmmod lookup sys_delete_module proc_lookup_de pde_get(de); proc_get_inode(dir->i_sb, de); mod->exit() proc_remove remove_proc_subtree proc_entry_rundown(de); free_module(mod); if (S_ISREG(inode->i_mode)) if (de->proc_ops->proc_read_iter) --> As module is already freed, will trigger UAF BUG: unable to handle page fault for address: fffffbfff80a702b PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:proc_get_inode+0x302/0x6e0 RSP: 0018:ffff88811c837998 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007 RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158 RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20 R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0 R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001 FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_lookup_de+0x11f/0x2e0 __lookup_slow+0x188/0x350 walk_component+0x2ab/0x4f0 path_lookupat+0x120/0x660 filename_lookup+0x1ce/0x560 vfs_statx+0xac/0x150 __do_sys_newstat+0x96/0x110 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e [adobriyan@gmail.com: don't do 2 atomic ops on the common path](CVE-2025-21999) In the Linux kernel, the following vulnerability has been resolved: regulator: check that dummy regulator has been probed before using it Due to asynchronous driver probing there is a chance that the dummy regulator hasn't already been probed when first accessing it.(CVE-2025-22008) In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state There are several problems with the way hyp code lazily saves the host's FPSIMD/SVE state, including: * Host SVE being discarded unexpectedly due to inconsistent configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to result in QEMU crashes where SVE is used by memmove(), as reported by Eric Auger: https://issues.redhat.com/browse/RHEL-68997 * Host SVE state is discarded *after* modification by ptrace, which was an unintentional ptrace ABI change introduced with lazy discarding of SVE state. * The host FPMR value can be discarded when running a non-protected VM, where FPMR support is not exposed to a VM, and that VM uses FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR before unbinding the host's FPSIMD/SVE/SME state, leaving a stale value in memory. Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME state when loading a vCPU such that KVM does not need to save any of the host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is removed and the necessary call to fpsimd_save_and_flush_cpu_state() is placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr' should not be used, they are set to NULL; all uses of these will be removed in subsequent patches. Historical problems go back at least as far as v5.17, e.g. erroneous assumptions about TIF_SVE being clear in commit: 8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving") ... and so this eager save+flush probably needs to be backported to ALL stable trees.(CVE-2025-22013) In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free in print_graph_function_flags during tracer switching Kairui reported a UAF issue in print_graph_function_flags() during ftrace stress testing [1]. This issue can be reproduced if puting a 'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(), and executing the following script: $ echo function_graph > current_tracer $ cat trace > /dev/null & $ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point $ echo timerlat > current_tracer The root cause lies in the two calls to print_graph_function_flags within print_trace_line during each s_show(): * One through 'iter->trace->print_line()'; * Another through 'event->funcs->trace()', which is hidden in print_trace_fmt() before print_trace_line returns. Tracer switching only updates the former, while the latter continues to use the print_line function of the old tracer, which in the script above is print_graph_function_flags. Moreover, when switching from the 'function_graph' tracer to the 'timerlat' tracer, s_start only calls graph_trace_close of the 'function_graph' tracer to free 'iter->private', but does not set it to NULL. This provides an opportunity for 'event->funcs->trace()' to use an invalid 'iter->private'. To fix this issue, set 'iter->private' to NULL immediately after freeing it in graph_trace_close(), ensuring that an invalid pointer is not passed to other tracers. Additionally, clean up the unnecessary 'iter->private = NULL' during each 'cat trace' when using wakeup and irqsoff tracers. [1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/(CVE-2025-22035) In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate zero num_subauth before sub_auth is accessed Access psid->sub_auth[psid->num_subauth - 1] without checking if num_subauth is non-zero leads to an out-of-bounds read. This patch adds a validation step to ensure num_subauth != 0 before sub_auth is accessed.(CVE-2025-22038) In the Linux kernel, the following vulnerability has been resolved: LoongArch: Increase ARCH_DMA_MINALIGN up to 16 ARCH_DMA_MINALIGN is 1 by default, but some LoongArch-specific devices (such as APBDMA) require 16 bytes alignment. When the data buffer length is too small, the hardware may make an error writing cacheline. Thus, it is dangerous to allocate a small memory buffer for DMA. It's always safe to define ARCH_DMA_MINALIGN as L1_CACHE_BYTES but unnecessary (kmalloc() need small memory objects). Therefore, just increase it to 16.(CVE-2025-22049) In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-card: Add NULL check in imx_card_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, imx_card_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.(CVE-2025-22066) In the Linux kernel, the following vulnerability has been resolved: ext4: goto right label 'out_mmap_sem' in ext4_setattr() Otherwise, if ext4_inode_attach_jinode() fails, a hung task will happen because filemap_invalidate_unlock() isn't called to unlock mapping->invalidate_lock. Like this: EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory INFO: task fsstress:374 blocked for more than 122 seconds. Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373 task_flags:0x440140 flags:0x00000000 Call Trace: <TASK> __schedule+0x2c9/0x7f0 schedule+0x27/0xa0 schedule_preempt_disabled+0x15/0x30 rwsem_down_read_slowpath+0x278/0x4c0 down_read+0x59/0xb0 page_cache_ra_unbounded+0x65/0x1b0 filemap_get_pages+0x124/0x3e0 filemap_read+0x114/0x3d0 vfs_read+0x297/0x360 ksys_read+0x6c/0xe0 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e(CVE-2025-22120) In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: Add NULL check for adev Not all devices have an ACPI companion fwnode, so adev might be NULL. This is similar to the commit cd2fd6eab480 ("platform/x86: int3472: Check for adev == NULL"). Add a check for adev not being set and return -ENODEV in that case to avoid a possible NULL pointer deref in int3402_thermal_probe(). Note, under the same directory, int3400_thermal_probe() has such a check. [ rjw: Subject edit, added Fixes: ](CVE-2025-23136) In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: dp: drm_err => dev_err in HPD path to avoid NULL ptr The function mtk_dp_wait_hpd_asserted() may be called before the `mtk_dp->drm_dev` pointer is assigned in mtk_dp_bridge_attach(). Specifically it can be called via this callpath: - mtk_edp_wait_hpd_asserted - [panel probe] - dp_aux_ep_probe Using "drm" level prints anywhere in this callpath causes a NULL pointer dereference. Change the error message directly in mtk_dp_wait_hpd_asserted() to dev_err() to avoid this. Also change the error messages in mtk_dp_parse_capabilities(), which is called by mtk_dp_wait_hpd_asserted(). While touching these prints, also add the error code to them to make future debugging easier.(CVE-2025-38240) An update for kernel is now available for openEuler-24.03-LTS. openEuler Security has rated this update as having a security impact of high. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section. High kernel https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2023-53034 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41935 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-49980 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-52559 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-52560 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53162 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53174 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53176 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53177 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53178 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53179 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53181 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53210 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53216 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53233 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-53680 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-54458 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-55881 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56533 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56545 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56558 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56566 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56573 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56574 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56576 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56577 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56579 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56587 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56593 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56600 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56602 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56616 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56625 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56628 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56635 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56636 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56643 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56644 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56645 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56651 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56664 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56678 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56689 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56694 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56707 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56710 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56723 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56724 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56725 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56727 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56751 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56754 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-56774 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57795 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57857 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57908 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57911 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57912 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57929 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57952 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57996 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-57999 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58002 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58003 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58007 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58009 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58011 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58013 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58014 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58016 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58017 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58076 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58079 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58083 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58086 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58088 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58090 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21636 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21637 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21638 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21640 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21665 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21666 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21669 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21675 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21690 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21692 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21697 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21700 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21701 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21709 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21712 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21721 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21735 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21739 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21741 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21742 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21744 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21746 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21748 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21749 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21753 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21758 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21759 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21760 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21761 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21762 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21763 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21764 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21765 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21766 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21772 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21773 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21775 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21779 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21780 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21781 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21784 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21790 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21792 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21793 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21821 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21826 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21830 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21831 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21835 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21836 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21838 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21847 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21848 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21855 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21857 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21858 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21859 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21862 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21866 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21867 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21870 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21871 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21873 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21877 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21878 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21881 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21883 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21885 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21888 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21892 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21895 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21898 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21899 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21910 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21914 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21923 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21927 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21928 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21935 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21941 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21943 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21946 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21949 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21963 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21964 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21976 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21978 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21993 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21994 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21999 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22008 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22013 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22035 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22038 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22049 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22066 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22120 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-23136 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38240 https://nvd.nist.gov/vuln/detail/CVE-2023-53034 https://nvd.nist.gov/vuln/detail/CVE-2024-41935 https://nvd.nist.gov/vuln/detail/CVE-2024-49980 https://nvd.nist.gov/vuln/detail/CVE-2024-52559 https://nvd.nist.gov/vuln/detail/CVE-2024-52560 https://nvd.nist.gov/vuln/detail/CVE-2024-53162 https://nvd.nist.gov/vuln/detail/CVE-2024-53174 https://nvd.nist.gov/vuln/detail/CVE-2024-53176 https://nvd.nist.gov/vuln/detail/CVE-2024-53177 https://nvd.nist.gov/vuln/detail/CVE-2024-53178 https://nvd.nist.gov/vuln/detail/CVE-2024-53179 https://nvd.nist.gov/vuln/detail/CVE-2024-53181 https://nvd.nist.gov/vuln/detail/CVE-2024-53210 https://nvd.nist.gov/vuln/detail/CVE-2024-53216 https://nvd.nist.gov/vuln/detail/CVE-2024-53233 https://nvd.nist.gov/vuln/detail/CVE-2024-53680 https://nvd.nist.gov/vuln/detail/CVE-2024-54458 https://nvd.nist.gov/vuln/detail/CVE-2024-55881 https://nvd.nist.gov/vuln/detail/CVE-2024-56533 https://nvd.nist.gov/vuln/detail/CVE-2024-56545 https://nvd.nist.gov/vuln/detail/CVE-2024-56558 https://nvd.nist.gov/vuln/detail/CVE-2024-56566 https://nvd.nist.gov/vuln/detail/CVE-2024-56573 https://nvd.nist.gov/vuln/detail/CVE-2024-56574 https://nvd.nist.gov/vuln/detail/CVE-2024-56576 https://nvd.nist.gov/vuln/detail/CVE-2024-56577 https://nvd.nist.gov/vuln/detail/CVE-2024-56579 https://nvd.nist.gov/vuln/detail/CVE-2024-56587 https://nvd.nist.gov/vuln/detail/CVE-2024-56593 https://nvd.nist.gov/vuln/detail/CVE-2024-56600 https://nvd.nist.gov/vuln/detail/CVE-2024-56602 https://nvd.nist.gov/vuln/detail/CVE-2024-56616 https://nvd.nist.gov/vuln/detail/CVE-2024-56625 https://nvd.nist.gov/vuln/detail/CVE-2024-56628 https://nvd.nist.gov/vuln/detail/CVE-2024-56635 https://nvd.nist.gov/vuln/detail/CVE-2024-56636 https://nvd.nist.gov/vuln/detail/CVE-2024-56643 https://nvd.nist.gov/vuln/detail/CVE-2024-56644 https://nvd.nist.gov/vuln/detail/CVE-2024-56645 https://nvd.nist.gov/vuln/detail/CVE-2024-56651 https://nvd.nist.gov/vuln/detail/CVE-2024-56664 https://nvd.nist.gov/vuln/detail/CVE-2024-56678 https://nvd.nist.gov/vuln/detail/CVE-2024-56689 https://nvd.nist.gov/vuln/detail/CVE-2024-56694 https://nvd.nist.gov/vuln/detail/CVE-2024-56707 https://nvd.nist.gov/vuln/detail/CVE-2024-56710 https://nvd.nist.gov/vuln/detail/CVE-2024-56723 https://nvd.nist.gov/vuln/detail/CVE-2024-56724 https://nvd.nist.gov/vuln/detail/CVE-2024-56725 https://nvd.nist.gov/vuln/detail/CVE-2024-56727 https://nvd.nist.gov/vuln/detail/CVE-2024-56751 https://nvd.nist.gov/vuln/detail/CVE-2024-56754 https://nvd.nist.gov/vuln/detail/CVE-2024-56774 https://nvd.nist.gov/vuln/detail/CVE-2024-57795 https://nvd.nist.gov/vuln/detail/CVE-2024-57857 https://nvd.nist.gov/vuln/detail/CVE-2024-57908 https://nvd.nist.gov/vuln/detail/CVE-2024-57911 https://nvd.nist.gov/vuln/detail/CVE-2024-57912 https://nvd.nist.gov/vuln/detail/CVE-2024-57929 https://nvd.nist.gov/vuln/detail/CVE-2024-57952 https://nvd.nist.gov/vuln/detail/CVE-2024-57996 https://nvd.nist.gov/vuln/detail/CVE-2024-57999 https://nvd.nist.gov/vuln/detail/CVE-2024-58002 https://nvd.nist.gov/vuln/detail/CVE-2024-58003 https://nvd.nist.gov/vuln/detail/CVE-2024-58007 https://nvd.nist.gov/vuln/detail/CVE-2024-58009 https://nvd.nist.gov/vuln/detail/CVE-2024-58011 https://nvd.nist.gov/vuln/detail/CVE-2024-58013 https://nvd.nist.gov/vuln/detail/CVE-2024-58014 https://nvd.nist.gov/vuln/detail/CVE-2024-58016 https://nvd.nist.gov/vuln/detail/CVE-2024-58017 https://nvd.nist.gov/vuln/detail/CVE-2024-58076 https://nvd.nist.gov/vuln/detail/CVE-2024-58079 https://nvd.nist.gov/vuln/detail/CVE-2024-58083 https://nvd.nist.gov/vuln/detail/CVE-2024-58086 https://nvd.nist.gov/vuln/detail/CVE-2024-58088 https://nvd.nist.gov/vuln/detail/CVE-2024-58090 https://nvd.nist.gov/vuln/detail/CVE-2025-21636 https://nvd.nist.gov/vuln/detail/CVE-2025-21637 https://nvd.nist.gov/vuln/detail/CVE-2025-21638 https://nvd.nist.gov/vuln/detail/CVE-2025-21640 https://nvd.nist.gov/vuln/detail/CVE-2025-21665 https://nvd.nist.gov/vuln/detail/CVE-2025-21666 https://nvd.nist.gov/vuln/detail/CVE-2025-21669 https://nvd.nist.gov/vuln/detail/CVE-2025-21675 https://nvd.nist.gov/vuln/detail/CVE-2025-21690 https://nvd.nist.gov/vuln/detail/CVE-2025-21692 https://nvd.nist.gov/vuln/detail/CVE-2025-21697 https://nvd.nist.gov/vuln/detail/CVE-2025-21700 https://nvd.nist.gov/vuln/detail/CVE-2025-21701 https://nvd.nist.gov/vuln/detail/CVE-2025-21709 https://nvd.nist.gov/vuln/detail/CVE-2025-21712 https://nvd.nist.gov/vuln/detail/CVE-2025-21721 https://nvd.nist.gov/vuln/detail/CVE-2025-21735 https://nvd.nist.gov/vuln/detail/CVE-2025-21739 https://nvd.nist.gov/vuln/detail/CVE-2025-21741 https://nvd.nist.gov/vuln/detail/CVE-2025-21742 https://nvd.nist.gov/vuln/detail/CVE-2025-21744 https://nvd.nist.gov/vuln/detail/CVE-2025-21746 https://nvd.nist.gov/vuln/detail/CVE-2025-21748 https://nvd.nist.gov/vuln/detail/CVE-2025-21749 https://nvd.nist.gov/vuln/detail/CVE-2025-21753 https://nvd.nist.gov/vuln/detail/CVE-2025-21758 https://nvd.nist.gov/vuln/detail/CVE-2025-21759 https://nvd.nist.gov/vuln/detail/CVE-2025-21760 https://nvd.nist.gov/vuln/detail/CVE-2025-21761 https://nvd.nist.gov/vuln/detail/CVE-2025-21762 https://nvd.nist.gov/vuln/detail/CVE-2025-21763 https://nvd.nist.gov/vuln/detail/CVE-2025-21764 https://nvd.nist.gov/vuln/detail/CVE-2025-21765 https://nvd.nist.gov/vuln/detail/CVE-2025-21766 https://nvd.nist.gov/vuln/detail/CVE-2025-21772 https://nvd.nist.gov/vuln/detail/CVE-2025-21773 https://nvd.nist.gov/vuln/detail/CVE-2025-21775 https://nvd.nist.gov/vuln/detail/CVE-2025-21779 https://nvd.nist.gov/vuln/detail/CVE-2025-21780 https://nvd.nist.gov/vuln/detail/CVE-2025-21781 https://nvd.nist.gov/vuln/detail/CVE-2025-21784 https://nvd.nist.gov/vuln/detail/CVE-2025-21790 https://nvd.nist.gov/vuln/detail/CVE-2025-21792 https://nvd.nist.gov/vuln/detail/CVE-2025-21793 https://nvd.nist.gov/vuln/detail/CVE-2025-21821 https://nvd.nist.gov/vuln/detail/CVE-2025-21826 https://nvd.nist.gov/vuln/detail/CVE-2025-21830 https://nvd.nist.gov/vuln/detail/CVE-2025-21831 https://nvd.nist.gov/vuln/detail/CVE-2025-21835 https://nvd.nist.gov/vuln/detail/CVE-2025-21836 https://nvd.nist.gov/vuln/detail/CVE-2025-21838 https://nvd.nist.gov/vuln/detail/CVE-2025-21847 https://nvd.nist.gov/vuln/detail/CVE-2025-21848 https://nvd.nist.gov/vuln/detail/CVE-2025-21855 https://nvd.nist.gov/vuln/detail/CVE-2025-21857 https://nvd.nist.gov/vuln/detail/CVE-2025-21858 https://nvd.nist.gov/vuln/detail/CVE-2025-21859 https://nvd.nist.gov/vuln/detail/CVE-2025-21862 https://nvd.nist.gov/vuln/detail/CVE-2025-21866 https://nvd.nist.gov/vuln/detail/CVE-2025-21867 https://nvd.nist.gov/vuln/detail/CVE-2025-21870 https://nvd.nist.gov/vuln/detail/CVE-2025-21871 https://nvd.nist.gov/vuln/detail/CVE-2025-21873 https://nvd.nist.gov/vuln/detail/CVE-2025-21877 https://nvd.nist.gov/vuln/detail/CVE-2025-21878 https://nvd.nist.gov/vuln/detail/CVE-2025-21881 https://nvd.nist.gov/vuln/detail/CVE-2025-21883 https://nvd.nist.gov/vuln/detail/CVE-2025-21885 https://nvd.nist.gov/vuln/detail/CVE-2025-21888 https://nvd.nist.gov/vuln/detail/CVE-2025-21892 https://nvd.nist.gov/vuln/detail/CVE-2025-21895 https://nvd.nist.gov/vuln/detail/CVE-2025-21898 https://nvd.nist.gov/vuln/detail/CVE-2025-21899 https://nvd.nist.gov/vuln/detail/CVE-2025-21910 https://nvd.nist.gov/vuln/detail/CVE-2025-21914 https://nvd.nist.gov/vuln/detail/CVE-2025-21923 https://nvd.nist.gov/vuln/detail/CVE-2025-21927 https://nvd.nist.gov/vuln/detail/CVE-2025-21928 https://nvd.nist.gov/vuln/detail/CVE-2025-21935 https://nvd.nist.gov/vuln/detail/CVE-2025-21941 https://nvd.nist.gov/vuln/detail/CVE-2025-21943 https://nvd.nist.gov/vuln/detail/CVE-2025-21946 https://nvd.nist.gov/vuln/detail/CVE-2025-21949 https://nvd.nist.gov/vuln/detail/CVE-2025-21963 https://nvd.nist.gov/vuln/detail/CVE-2025-21964 https://nvd.nist.gov/vuln/detail/CVE-2025-21976 https://nvd.nist.gov/vuln/detail/CVE-2025-21978 https://nvd.nist.gov/vuln/detail/CVE-2025-21993 https://nvd.nist.gov/vuln/detail/CVE-2025-21994 https://nvd.nist.gov/vuln/detail/CVE-2025-21999 https://nvd.nist.gov/vuln/detail/CVE-2025-22008 https://nvd.nist.gov/vuln/detail/CVE-2025-22013 https://nvd.nist.gov/vuln/detail/CVE-2025-22035 https://nvd.nist.gov/vuln/detail/CVE-2025-22038 https://nvd.nist.gov/vuln/detail/CVE-2025-22049 https://nvd.nist.gov/vuln/detail/CVE-2025-22066 https://nvd.nist.gov/vuln/detail/CVE-2025-22120 https://nvd.nist.gov/vuln/detail/CVE-2025-23136 https://nvd.nist.gov/vuln/detail/CVE-2025-38240 openEuler-24.03-LTS bpftool-6.6.0-87.0.0.82.oe2403.aarch64.rpm bpftool-debuginfo-6.6.0-87.0.0.82.oe2403.aarch64.rpm kernel-6.6.0-87.0.0.82.oe2403.aarch64.rpm kernel-debuginfo-6.6.0-87.0.0.82.oe2403.aarch64.rpm kernel-debugsource-6.6.0-87.0.0.82.oe2403.aarch64.rpm kernel-devel-6.6.0-87.0.0.82.oe2403.aarch64.rpm kernel-headers-6.6.0-87.0.0.82.oe2403.aarch64.rpm kernel-source-6.6.0-87.0.0.82.oe2403.aarch64.rpm kernel-tools-6.6.0-87.0.0.82.oe2403.aarch64.rpm kernel-tools-debuginfo-6.6.0-87.0.0.82.oe2403.aarch64.rpm kernel-tools-devel-6.6.0-87.0.0.82.oe2403.aarch64.rpm perf-6.6.0-87.0.0.82.oe2403.aarch64.rpm perf-debuginfo-6.6.0-87.0.0.82.oe2403.aarch64.rpm python3-perf-6.6.0-87.0.0.82.oe2403.aarch64.rpm python3-perf-debuginfo-6.6.0-87.0.0.82.oe2403.aarch64.rpm bpftool-6.6.0-87.0.0.82.oe2403.x86_64.rpm bpftool-debuginfo-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-debuginfo-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-debugsource-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-devel-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-headers-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-source-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-tools-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-tools-debuginfo-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-tools-devel-6.6.0-87.0.0.82.oe2403.x86_64.rpm perf-6.6.0-87.0.0.82.oe2403.x86_64.rpm perf-debuginfo-6.6.0-87.0.0.82.oe2403.x86_64.rpm python3-perf-6.6.0-87.0.0.82.oe2403.x86_64.rpm python3-perf-debuginfo-6.6.0-87.0.0.82.oe2403.x86_64.rpm kernel-6.6.0-87.0.0.82.oe2403.src.rpm In the Linux kernel, the following vulnerability has been resolved: ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and size. This would make xlate_pos negative. [ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000 [ 23.734158] ================================================================================ [ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7 [ 23.734418] shift exponent -1 is negative Ensuring xlate_pos is a positive or zero before BIT. 2025-04-25 CVE-2023-53034 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to shrink read extent node in batches We use rwlock to protect core structure data of extent tree during its shrink, however, if there is a huge number of extent nodes in extent tree, during shrink of extent tree, it may hold rwlock for a very long time, which may trigger kernel hang issue. This patch fixes to shrink read extent node in batches, so that, critical region of the rwlock can be shrunk to avoid its extreme long time hold. 2025-04-25 CVE-2024-41935 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: vrf: revert "vrf: Remove unnecessary RCU-bh critical section" This reverts commit 504fc6f4f7f681d2a03aa5f68aad549d90eab853. dev_queue_xmit_nit is expected to be called with BH disabled. __dev_queue_xmit has the following: /* Disable soft irqs for various locks below. Also * stops preemption for RCU. */ rcu_read_lock_bh(); VRF must follow this invariant. The referenced commit removed this protection. Which triggered a lockdep warning: ================================ WARNING: inconsistent lock state 6.11.0 #1 Tainted: G W -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30 {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 packet_rcv+0xa33/0x1320 __netif_receive_skb_core.constprop.0+0xcb0/0x3a90 __netif_receive_skb_list_core+0x2c9/0x890 netif_receive_skb_list_internal+0x610/0xcc0 [...] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rlock-AF_PACKET); <Interrupt> lock(rlock-AF_PACKET); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 mark_lock+0x102e/0x16b0 __lock_acquire+0x9ae/0x6170 lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 tpacket_rcv+0x863/0x3b30 dev_queue_xmit_nit+0x709/0xa40 vrf_finish_direct+0x26e/0x340 [vrf] vrf_l3_out+0x5f4/0xe80 [vrf] __ip_local_out+0x51e/0x7a0 [...] 2025-04-25 CVE-2024-49980 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit() The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32 values that come from the user via the submit_lookup_cmds() function. This addition could lead to an integer wrapping bug so use size_add() to prevent that. Patchwork: https://patchwork.freedesktop.org/patch/624696/ 2025-04-25 CVE-2024-52559 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Mark inode as bad as soon as error detected in mi_enum_attr() Extended the `mi_enum_attr()` function interface with an additional parameter, `struct ntfs_inode *ni`, to allow marking the inode as bad as soon as an error is detected. 2025-04-25 CVE-2024-52560 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: crypto: qat/qat_4xxx - fix off by one in uof_get_name() The fw_objs[] array has "num_objs" elements so the > needs to be >= to prevent an out of bounds read. 2025-04-25 CVE-2024-53162 openEuler-24.03-LTS High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: SUNRPC: make sure cache entry active before cache_show The function `c_show` was called with protection from RCU. This only ensures that `cp` will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e 2025-04-25 CVE-2024-53174 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: smb: During unmount, ensure all cached dir instances drop their dentry The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can race with various cached directory operations, which ultimately results in dentries not being dropped and these kernel BUGs: BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) ------------[ cut here ]------------ kernel BUG at fs/super.c:661! This happens when a cfid is in the process of being cleaned up when, and has been removed from the cfids->entries list, including: - Receiving a lease break from the server - Server reconnection triggers invalidate_all_cached_dirs(), which removes all the cfids from the list - The laundromat thread decides to expire an old cfid. To solve these problems, dropping the dentry is done in queued work done in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs() flushes that workqueue after it drops all the dentries of which it's aware. This is a global workqueue (rather than scoped to a mount), but the queued work is minimal. The final cleanup work for cleaning up a cfid is performed via work queued in the serverclose_wq workqueue; this is done separate from dropping the dentries so that close_all_cached_dirs() doesn't block on any server operations. Both of these queued works expect to invoked with a cfid reference and a tcon reference to avoid those objects from being freed while the work is ongoing. While we're here, add proper locking to close_all_cached_dirs(), and locking around the freeing of cfid->dentry. 2025-04-25 CVE-2024-53176 openEuler-24.03-LTS Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: smb: prevent use-after-free due to open_cached_dir error paths If open_cached_dir() encounters an error parsing the lease from the server, the error handling may race with receiving a lease break, resulting in open_cached_dir() freeing the cfid while the queued work is pending. Update open_cached_dir() to drop refs rather than directly freeing the cfid. Have cached_dir_lease_break(), cfids_laundromat_worker(), and invalidate_all_cached_dirs() clear has_lease immediately while still holding cfids->cfid_list_lock, and then use this to also simplify the reference counting in cfids_laundromat_worker() and invalidate_all_cached_dirs(). Fixes this KASAN splat (which manually injects an error and lease break in open_cached_dir()): ================================================================== BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0 Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65 CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: cifsiod smb2_cached_lease_break Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 print_report+0xce/0x660 kasan_report+0xd3/0x110 smb2_cached_lease_break+0x27/0xb0 process_one_work+0x50a/0xc50 worker_thread+0x2ba/0x530 kthread+0x17c/0x1c0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 open_cached_dir+0xa7d/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x51/0x70 kfree+0x174/0x520 open_cached_dir+0x97f/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x33/0x60 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x32/0x100 __queue_work+0x5c9/0x870 queue_work_on+0x82/0x90 open_cached_dir+0x1369/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff88811cc24c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 16 bytes inside of freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000) 2025-04-25 CVE-2024-53177 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: smb: Don't leak cfid when reconnect races with open_cached_dir open_cached_dir() may either race with the tcon reconnection even before compound_send_recv() or directly trigger a reconnection via SMB2_open_init() or SMB_query_info_init(). The reconnection process invokes invalidate_all_cached_dirs() via cifs_mark_open_files_invalid(), which removes all cfids from the cfids->entries list but doesn't drop a ref if has_lease isn't true. This results in the currently-being-constructed cfid not being on the list, but still having a refcount of 2. It leaks if returned from open_cached_dir(). Fix this by setting cfid->has_lease when the ref is actually taken; the cfid will not be used by other threads until it has a valid time. Addresses these kmemleaks: unreferenced object 0xffff8881090c4000 (size 1024): comm "bash", pid 1860, jiffies 4295126592 hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 00 ca 45 22 81 88 ff ff f8 dc 4f 04 81 88 ff ff ..E"......O..... backtrace (crc 6f58c20f): [<ffffffff8b895a1e>] __kmalloc_cache_noprof+0x2be/0x350 [<ffffffff8bda06e3>] open_cached_dir+0x993/0x1fb0 [<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50 [<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0 [<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200 [<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0 [<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e unreferenced object 0xffff8881044fdcf8 (size 8): comm "bash", pid 1860, jiffies 4295126592 hex dump (first 8 bytes): 00 cc cc cc cc cc cc cc ........ backtrace (crc 10c106a9): [<ffffffff8b89a3d3>] __kmalloc_node_track_caller_noprof+0x363/0x480 [<ffffffff8b7d7256>] kstrdup+0x36/0x60 [<ffffffff8bda0700>] open_cached_dir+0x9b0/0x1fb0 [<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50 [<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0 [<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200 [<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0 [<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e And addresses these BUG splats when unmounting the SMB filesystem: BUG: Dentry ffff888140590ba0{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs] WARNING: CPU: 3 PID: 3433 at fs/dcache.c:1536 umount_check+0xd0/0x100 Modules linked in: CPU: 3 UID: 0 PID: 3433 Comm: bash Not tainted 6.12.0-rc4-g850925a8133c-dirty #49 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:umount_check+0xd0/0x100 Code: 8d 7c 24 40 e8 31 5a f4 ff 49 8b 54 24 40 41 56 49 89 e9 45 89 e8 48 89 d9 41 57 48 89 de 48 c7 c7 80 e7 db ac e8 f0 72 9a ff <0f> 0b 58 31 c0 5a 5b 5d 41 5c 41 5d 41 5e 41 5f e9 2b e5 5d 01 41 RSP: 0018:ffff88811cc27978 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888140590ba0 RCX: ffffffffaaf20bae RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881f6fb6f40 RBP: ffff8881462ec000 R08: 0000000000000001 R09: ffffed1023984ee3 R10: ffff88811cc2771f R11: 00000000016cfcc0 R12: ffff888134383e08 R13: 0000000000000002 R14: ffff8881462ec668 R15: ffffffffaceab4c0 FS: 00007f23bfa98740(0000) GS:ffff8881f6f80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556de4a6f808 CR3: 0000000123c80000 CR4: 0000000000350ef0 Call Trace: <TASK> d_walk+0x6a/0x530 shrink_dcache_for_umount+0x6a/0x200 generic_shutdown_super+0x52/0x2a0 kill_anon_super+0x22/0x40 cifs_kill_sb+0x159/0x1e0 deactivate_locked_super+0x66/0xe0 cleanup_mnt+0x140/0x210 task_work_run+0xfb/0x170 syscall_exit_to_user_mode+0x29f/0x2b0 do_syscall_64+0xa1/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f23bfb93ae7 Code: ff ff ff ff c3 66 0f 1f 44 00 00 48 8b 0d 11 93 0d 00 f7 d8 64 89 01 b8 ff ff ff ff eb bf 0f 1f 44 00 00 b8 50 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 92 0d 00 f7 d8 64 89 ---truncated--- 2025-04-25 CVE-2024-53178 openEuler-24.03-LTS Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of signing key Customers have reported use-after-free in @ses->auth_key.response with SMB2.1 + sign mounts which occurs due to following race: task A task B cifs_mount() dfs_mount_share() get_session() cifs_mount_get_session() cifs_send_recv() cifs_get_smb_ses() compound_send_recv() cifs_setup_session() smb2_setup_request() kfree_sensitive() smb2_calc_signature() crypto_shash_setkey() *UAF* Fix this by ensuring that we have a valid @ses->auth_key.response by checking whether @ses->ses_status is SES_GOOD or SES_EXITING with @ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF in smb2_reconnect_server()"), we made sure to call ->logoff() only when @ses was known to be good (e.g. valid ->auth_key.response), so it's safe to access signing key when @ses->ses_status == SES_EXITING. 2025-04-25 CVE-2024-53179 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: um: vector: Do not use drvdata in release The drvdata is not available in release. Let's just use container_of() to get the vector_device instance. Otherwise, removing a vector device will result in a crash: RIP: 0033:vector_device_release+0xf/0x50 RSP: 00000000e187bc40 EFLAGS: 00010202 RAX: 0000000060028f61 RBX: 00000000600f1baf RCX: 00000000620074e0 RDX: 000000006220b9c0 RSI: 0000000060551c80 RDI: 0000000000000000 RBP: 00000000e187bc50 R08: 00000000603ad594 R09: 00000000e187bb70 R10: 000000000000135a R11: 00000000603ad422 R12: 00000000623ae028 R13: 000000006287a200 R14: 0000000062006d30 R15: 00000000623700b6 Kernel panic - not syncing: Segfault with no mm CPU: 0 UID: 0 PID: 16 Comm: kworker/0:1 Not tainted 6.12.0-rc6-g59b723cd2adb #1 Workqueue: events mc_work_proc Stack: 60028f61 623ae028 e187bc80 60276fcd 6220b9c0 603f5820 623ae028 00000000 e187bcb0 603a2bcd 623ae000 62370010 Call Trace: [<60028f61>] ? vector_device_release+0x0/0x50 [<60276fcd>] device_release+0x70/0xba [<603a2bcd>] kobject_put+0xba/0xe7 [<60277265>] put_device+0x19/0x1c [<60281266>] platform_device_put+0x26/0x29 [<60281e5f>] platform_device_unregister+0x2c/0x2e [<60029422>] vector_remove+0x52/0x58 [<60031316>] ? mconsole_reply+0x0/0x50 [<600310c8>] mconsole_remove+0x160/0x1cc [<603b19f4>] ? strlen+0x0/0x15 [<60066611>] ? __dequeue_entity+0x1a9/0x206 [<600666a7>] ? set_next_entity+0x39/0x63 [<6006666e>] ? set_next_entity+0x0/0x63 [<60038fa6>] ? um_set_signals+0x0/0x43 [<6003070c>] mc_work_proc+0x77/0x91 [<60057664>] process_scheduled_works+0x1b3/0x2dd [<60055f32>] ? assign_work+0x0/0x58 [<60057f0a>] worker_thread+0x1e9/0x293 [<6005406f>] ? set_pf_worker+0x0/0x64 [<6005d65d>] ? arch_local_irq_save+0x0/0x2d [<6005d748>] ? kthread_exit+0x0/0x3a [<60057d21>] ? worker_thread+0x0/0x293 [<6005dbf1>] kthread+0x126/0x12b [<600219c5>] new_thread_handler+0x85/0xb6 2025-04-25 CVE-2024-53181 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct() Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount (skb->users) and iucv_sock_recvmsg() does not decrement skb refcount at exit. This results in skb memory leak in skb_queue_purge() and WARN_ON in iucv_sock_destruct() during socket close. To fix this decrease skb refcount by one if MSG_PEEK is set in order to prevent memory leak and WARN_ON. WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv] CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1 Hardware name: IBM 3931 A01 704 (z/VM 7.3.0) Call Trace: [<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv] [<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv] [<001587c704117a32>] __sk_destruct+0x52/0x550 [<001587c704104a54>] __sock_release+0xa4/0x230 [<001587c704104c0c>] sock_close+0x2c/0x40 [<001587c702c5f5a8>] __fput+0x2e8/0x970 [<001587c7024148c4>] task_work_run+0x1c4/0x2c0 [<001587c7023b0716>] do_exit+0x996/0x1050 [<001587c7023b13aa>] do_group_exit+0x13a/0x360 [<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60 [<001587c7022bccca>] do_syscall+0x27a/0x380 [<001587c7049a6a0c>] __do_syscall+0x9c/0x160 [<001587c7049ce8a8>] system_call+0x70/0x98 Last Breaking-Event-Address: [<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv] 2025-04-25 CVE-2024-53210 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: nfsd: release svc_expkey/svc_export with rcu_work The last reference for `cache_head` can be reduced to zero in `c_show` and `e_show`(using `rcu_read_lock` and `rcu_read_unlock`). Consequently, `svc_export_put` and `expkey_put` will be invoked, leading to two issues: 1. The `svc_export_put` will directly free ex_uuid. However, `e_show`/`c_show` will access `ex_uuid` after `cache_put`, which can trigger a use-after-free issue, shown below. ================================================================== BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd] Read of size 1 at addr ff11000010fdc120 by task cat/870 CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_address_description.constprop.0+0x2c/0x3a0 print_report+0xb9/0x280 kasan_report+0xae/0xe0 svc_export_show+0x362/0x430 [nfsd] c_show+0x161/0x390 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 830: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_node_track_caller_noprof+0x1bc/0x400 kmemdup_noprof+0x22/0x50 svc_export_parse+0x8a9/0xb80 [nfsd] cache_do_downcall+0x71/0xa0 [sunrpc] cache_write_procfs+0x8e/0xd0 [sunrpc] proc_reg_write+0xe1/0x140 vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 868: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kfree+0xf3/0x3e0 svc_export_put+0x87/0xb0 [nfsd] cache_purge+0x17f/0x1f0 [sunrpc] nfsd_destroy_serv+0x226/0x2d0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e 2. We cannot sleep while using `rcu_read_lock`/`rcu_read_unlock`. However, `svc_export_put`/`expkey_put` will call path_put, which subsequently triggers a sleeping operation due to the following `dput`. ============================= WARNING: suspicious RCU usage 5.10.0-dirty #141 Not tainted ----------------------------- ... Call Trace: dump_stack+0x9a/0xd0 ___might_sleep+0x231/0x240 dput+0x39/0x600 path_put+0x1b/0x30 svc_export_put+0x17/0x80 e_show+0x1c9/0x200 seq_read_iter+0x63f/0x7c0 seq_read+0x226/0x2d0 vfs_read+0x113/0x2c0 ksys_read+0xc9/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Fix these issues by using `rcu_work` to help release `svc_expkey`/`svc_export`. This approach allows for an asynchronous context to invoke `path_put` and also facilitates the freeing of `uuid/exp/key` after an RCU grace period. 2025-04-25 CVE-2024-53216 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: unicode: Fix utf8_load() error path utf8_load() requests the symbol "utf8_data_table" and then checks if the requested UTF-8 version is supported. If it's unsupported, it tries to put the data table using symbol_put(). If an unsupported version is requested, symbol_put() fails like this: kernel BUG at kernel/module/main.c:786! RIP: 0010:__symbol_put+0x93/0xb0 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? __symbol_put+0x93/0xb0 ? exc_invalid_op+0x51/0x70 ? __symbol_put+0x93/0xb0 ? asm_exc_invalid_op+0x1a/0x20 ? __pfx_cmp_name+0x10/0x10 ? __symbol_put+0x93/0xb0 ? __symbol_put+0x62/0xb0 utf8_load+0xf8/0x150 That happens because symbol_put() expects the unique string that identify the symbol, instead of a pointer to the loaded symbol. Fix that by using such string. 2025-04-25 CVE-2024-53233 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init() Under certain kernel configurations when building with Clang/LLVM, the compiler does not generate a return or jump as the terminator instruction for ip_vs_protocol_init(), triggering the following objtool warning during build time: vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6() At runtime, this either causes an oops when trying to load the ipvs module or a boot-time panic if ipvs is built-in. This same issue has been reported by the Intel kernel test robot previously. Digging deeper into both LLVM and the kernel code reveals this to be a undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer of 64 chars to store the registered protocol names and leaves it uninitialized after definition. The function calls strnlen() when concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE strnlen() performs an extra step to check whether the last byte of the input char buffer is a null character (commit 3009f891bb9f ("fortify: Allow strlen() and strnlen() to pass compile-time known lengths")). This, together with possibly other configurations, cause the following IR to be generated: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 { %1 = alloca [64 x i8], align 16 ... 14: ; preds = %11 %15 = getelementptr inbounds i8, ptr %1, i64 63 %16 = load i8, ptr %15, align 1 %17 = tail call i1 @llvm.is.constant.i8(i8 %16) %18 = icmp eq i8 %16, 0 %19 = select i1 %17, i1 %18, i1 false br i1 %19, label %20, label %23 20: ; preds = %14 %21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23 ... 23: ; preds = %14, %11, %20 %24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24 ... } The above code calculates the address of the last char in the buffer (value %15) and then loads from it (value %16). Because the buffer is never initialized, the LLVM GVN pass marks value %16 as undefined: %13 = getelementptr inbounds i8, ptr %1, i64 63 br i1 undef, label %14, label %17 This gives later passes (SCCP, in particular) more DCE opportunities by propagating the undef value further, and eventually removes everything after the load on the uninitialized stack location: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 { %1 = alloca [64 x i8], align 16 ... 12: ; preds = %11 %13 = getelementptr inbounds i8, ptr %1, i64 63 unreachable } In this way, the generated native code will just fall through to the next function, as LLVM does not generate any code for the unreachable IR instruction and leaves the function without a terminator. Zero the on-stack buffer to avoid this possible UB. 2025-04-25 CVE-2024-53680 openEuler-24.03-LTS Medium 5.8 AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: bsg: Set bsg_queue to NULL after removal Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. 2025-04-25 CVE-2024-54458 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Play nice with protected guests in complete_hypercall_exit() Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit hypercall when completing said hypercall. For guests with protected state, e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit mode as the vCPU state needed to detect 64-bit mode is unavailable. Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE hypercall via VMGEXIT trips the WARN: ------------[ cut here ]------------ WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm] Modules linked in: kvm_amd kvm ... [last unloaded: kvm] CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470 Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024 RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm] kvm_vcpu_ioctl+0x54f/0x630 [kvm] __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- 2025-04-25 CVE-2024-55881 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Use snd_card_free_when_closed() at disconnection The USB disconnect callback is supposed to be short and not too-long waiting. OTOH, the current code uses snd_card_free() at disconnection, but this waits for the close of all used fds, hence it can take long. It eventually blocks the upper layer USB ioctls, which may trigger a soft lockup. An easy workaround is to replace snd_card_free() with snd_card_free_when_closed(). This variant returns immediately while the release of resources is done asynchronously by the card device release at the last close. 2025-04-25 CVE-2024-56533 openEuler-24.03-LTS Low 3.3 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: streamline driver probe to avoid devres issues It was found that unloading 'hid_hyperv' module results in a devres complaint: ... hv_vmbus: unregistering driver hid_hyperv ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0 ... Call Trace: <TASK> ? devres_release_group+0x1f2/0x2c0 ? __warn+0xd1/0x1c0 ? devres_release_group+0x1f2/0x2c0 ? report_bug+0x32a/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? devres_release_group+0x1f2/0x2c0 ? devres_release_group+0x90/0x2c0 ? rcu_is_watching+0x15/0xb0 ? __pfx_devres_release_group+0x10/0x10 hid_device_remove+0xf5/0x220 device_release_driver_internal+0x371/0x540 ? klist_put+0xf3/0x170 bus_remove_device+0x1f1/0x3f0 device_del+0x33f/0x8c0 ? __pfx_device_del+0x10/0x10 ? cleanup_srcu_struct+0x337/0x500 hid_destroy_device+0xc8/0x130 mousevsc_remove+0xd2/0x1d0 [hid_hyperv] device_release_driver_internal+0x371/0x540 driver_detach+0xc5/0x180 bus_remove_driver+0x11e/0x2a0 ? __mutex_unlock_slowpath+0x160/0x5e0 vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus] ... And the issue seems to be that the corresponding devres group is not allocated. Normally, devres_open_group() is called from __hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver' with 'mousevsc_hid_driver' stub and basically re-implements __hid_device_probe() by calling hid_parse() and hid_hw_start() but not devres_open_group(). hid_device_probe() does not call __hid_device_probe() for it. Later, when the driver is removed, hid_device_remove() calls devres_release_group() as it doesn't check whether hdev->driver was initially overridden or not. The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") but the commit itself seems to be correct. Fix the issue by dropping the 'hid_dev->driver' override and using hid_register_driver()/hid_unregister_driver() instead. Alternatively, it would have been possible to rely on the default handling but HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work for mousevsc as-is. 2025-04-25 CVE-2024-56545 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: nfsd: make sure exp active before svc_export_show The function `e_show` was called with protection from RCU. This only ensures that `exp` will not be freed. Therefore, the reference count for `exp` can drop to zero, which will trigger a refcount use-after-free warning when `exp_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `exp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 819 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 ... Call Trace: <TASK> e_show+0x20b/0x230 [nfsd] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e 2025-04-25 CVE-2024-56558 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: mm/slub: Avoid list corruption when removing a slab from the full list Boot with slub_debug=UFPZ. If allocated object failed in alloc_consistency_checks, all objects of the slab will be marked as used, and then the slab will be removed from the partial list. When an object belonging to the slab got freed later, the remove_full() function is called. Because the slab is neither on the partial list nor on the full list, it eventually lead to a list corruption (actually a list poison being detected). So we need to mark and isolate the slab page with metadata corruption, do not put it back in circulation. Because the debug caches avoid all the fastpaths, reusing the frozen bit to mark slab page with metadata corruption seems to be fine. [ 4277.385669] list_del corruption, ffffea00044b3e50->next is LIST_POISON1 (dead000000000100) [ 4277.387023] ------------[ cut here ]------------ [ 4277.387880] kernel BUG at lib/list_debug.c:56! [ 4277.388680] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 4277.389562] CPU: 5 PID: 90 Comm: kworker/5:1 Kdump: loaded Tainted: G OE 6.6.1-1 #1 [ 4277.392113] Workqueue: xfs-inodegc/vda1 xfs_inodegc_worker [xfs] [ 4277.393551] RIP: 0010:__list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.394518] Code: 48 91 82 e8 37 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 28 49 91 82 e8 26 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 58 49 91 [ 4277.397292] RSP: 0018:ffffc90000333b38 EFLAGS: 00010082 [ 4277.398202] RAX: 000000000000004e RBX: ffffea00044b3e50 RCX: 0000000000000000 [ 4277.399340] RDX: 0000000000000002 RSI: ffffffff828f8715 RDI: 00000000ffffffff [ 4277.400545] RBP: ffffea00044b3e40 R08: 0000000000000000 R09: ffffc900003339f0 [ 4277.401710] R10: 0000000000000003 R11: ffffffff82d44088 R12: ffff888112cf9910 [ 4277.402887] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8881000424c0 [ 4277.404049] FS: 0000000000000000(0000) GS:ffff88842fd40000(0000) knlGS:0000000000000000 [ 4277.405357] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4277.406389] CR2: 00007f2ad0b24000 CR3: 0000000102a3a006 CR4: 00000000007706e0 [ 4277.407589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4277.408780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4277.410000] PKRU: 55555554 [ 4277.410645] Call Trace: [ 4277.411234] <TASK> [ 4277.411777] ? die+0x32/0x80 [ 4277.412439] ? do_trap+0xd6/0x100 [ 4277.413150] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.414158] ? do_error_trap+0x6a/0x90 [ 4277.414948] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.415915] ? exc_invalid_op+0x4c/0x60 [ 4277.416710] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.417675] ? asm_exc_invalid_op+0x16/0x20 [ 4277.418482] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.419466] ? __list_del_entry_valid_or_report+0x7b/0xc0 [ 4277.420410] free_to_partial_list+0x515/0x5e0 [ 4277.421242] ? xfs_iext_remove+0x41a/0xa10 [xfs] [ 4277.422298] xfs_iext_remove+0x41a/0xa10 [xfs] [ 4277.423316] ? xfs_inodegc_worker+0xb4/0x1a0 [xfs] [ 4277.424383] xfs_bmap_del_extent_delay+0x4fe/0x7d0 [xfs] [ 4277.425490] __xfs_bunmapi+0x50d/0x840 [xfs] [ 4277.426445] xfs_itruncate_extents_flags+0x13a/0x490 [xfs] [ 4277.427553] xfs_inactive_truncate+0xa3/0x120 [xfs] [ 4277.428567] xfs_inactive+0x22d/0x290 [xfs] [ 4277.429500] xfs_inodegc_worker+0xb4/0x1a0 [xfs] [ 4277.430479] process_one_work+0x171/0x340 [ 4277.431227] worker_thread+0x277/0x390 [ 4277.431962] ? __pfx_worker_thread+0x10/0x10 [ 4277.432752] kthread+0xf0/0x120 [ 4277.433382] ? __pfx_kthread+0x10/0x10 [ 4277.434134] ret_from_fork+0x2d/0x50 [ 4277.434837] ? __pfx_kthread+0x10/0x10 [ 4277.435566] ret_from_fork_asm+0x1b/0x30 [ 4277.436280] </TASK> 2025-04-25 CVE-2024-56566 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: efi/libstub: Free correct pointer on failure cmdline_ptr is an out parameter, which is not allocated by the function itself, and likely points into the caller's stack. cmdline refers to the pool allocation that should be freed when cleaning up after a failure, so pass this instead to free_pool(). 2025-04-25 CVE-2024-56573 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: media: ts2020: fix null-ptr-deref in ts2020_probe() KASAN reported a null-ptr-deref issue when executing the following command: # echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020] RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809 RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010 RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6 R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790 R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001 FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ts2020_probe+0xad/0xe10 [ts2020] i2c_device_probe+0x421/0xb40 really_probe+0x266/0x850 ... The cause of the problem is that when using sysfs to dynamically register an i2c device, there is no platform data, but the probe process of ts2020 needs to use platform data, resulting in a null pointer being accessed. Solve this problem by adding checks to platform data. 2025-04-25 CVE-2024-56574 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: media: i2c: tc358743: Fix crash in the probe error path when using polling If an error occurs in the probe() function, we should remove the polling timer that was alarmed earlier, otherwise the timer is called with arguments that are already freed, which results in a crash. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 0 at kernel/time/timer.c:1830 __run_timers+0x244/0x268 Modules linked in: CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.11.0 #226 Hardware name: Diasom DS-RK3568-SOM-EVB (DT) pstate: 804000c9 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __run_timers+0x244/0x268 lr : __run_timers+0x1d4/0x268 sp : ffffff80eff2baf0 x29: ffffff80eff2bb50 x28: 7fffffffffffffff x27: ffffff80eff2bb00 x26: ffffffc080f669c0 x25: ffffff80efef6bf0 x24: ffffff80eff2bb00 x23: 0000000000000000 x22: dead000000000122 x21: 0000000000000000 x20: ffffff80efef6b80 x19: ffffff80041c8bf8 x18: ffffffffffffffff x17: ffffffc06f146000 x16: ffffff80eff27dc0 x15: 000000000000003e x14: 0000000000000000 x13: 00000000000054da x12: 0000000000000000 x11: 00000000000639c0 x10: 000000000000000c x9 : 0000000000000009 x8 : ffffff80eff2cb40 x7 : ffffff80eff2cb40 x6 : ffffff8002bee480 x5 : ffffffc080cb2220 x4 : ffffffc080cb2150 x3 : 00000000000f4240 x2 : 0000000000000102 x1 : ffffff80eff2bb00 x0 : ffffff80041c8bf0 Call trace:  __run_timers+0x244/0x268  timer_expire_remote+0x50/0x68  tmigr_handle_remote+0x388/0x39c  run_timer_softirq+0x38/0x44  handle_softirqs+0x138/0x298  __do_softirq+0x14/0x20  ____do_softirq+0x10/0x1c  call_on_irq_stack+0x24/0x4c  do_softirq_own_stack+0x1c/0x2c  irq_exit_rcu+0x9c/0xcc  el1_interrupt+0x48/0xc0  el1h_64_irq_handler+0x18/0x24  el1h_64_irq+0x7c/0x80  default_idle_call+0x34/0x68  do_idle+0x23c/0x294  cpu_startup_entry+0x38/0x3c  secondary_start_kernel+0x128/0x160  __secondary_switched+0xb8/0xbc ---[ end trace 0000000000000000 ]--- 2025-04-25 CVE-2024-56576 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix null-ptr-deref during unload module The workqueue should be destroyed in mtk_jpeg_core.c since commit 09aea13ecf6f ("media: mtk-jpeg: refactor some variables"), otherwise the below calltrace can be easily triggered. [ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023 [ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] ... [ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ #17 ... [ 677.882838] pc : destroy_workqueue+0x3c/0x770 [ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.884314] sp : ffff80008ad974f0 [ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070 [ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690 [ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000 [ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0 [ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10 [ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d [ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90 [ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001 [ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000 [ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118 [ 677.893977] Call trace: [ 677.894297] destroy_workqueue+0x3c/0x770 [ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.895677] devm_action_release+0x50/0x90 [ 677.896211] release_nodes+0xe8/0x170 [ 677.896688] devres_release_all+0xf8/0x178 [ 677.897219] device_unbind_cleanup+0x24/0x170 [ 677.897785] device_release_driver_internal+0x35c/0x480 [ 677.898461] device_release_driver+0x20/0x38 ... [ 677.912665] ---[ end trace 0000000000000000 ]--- 2025-04-25 CVE-2024-56577 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: media: amphion: Set video drvdata before register video device The video drvdata should be set before the video device is registered, otherwise video_drvdata() may return NULL in the open() file ops, and led to oops. 2025-04-25 CVE-2024-56579 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: leds: class: Protect brightness_show() with led_cdev->led_access mutex There is NULL pointer issue observed if from Process A where hid device being added which results in adding a led_cdev addition and later a another call to access of led_cdev attribute from Process B can result in NULL pointer issue. Use mutex led_cdev->led_access to protect access to led->cdev and its attribute inside brightness_show() and max_brightness_show() and also update the comment for mutex that it should be used to protect the led class device fields. Process A Process B kthread+0x114 worker_thread+0x244 process_scheduled_works+0x248 uhid_device_add_worker+0x24 hid_add_device+0x120 device_add+0x268 bus_probe_device+0x94 device_initial_probe+0x14 __device_attach+0xfc bus_for_each_drv+0x10c __device_attach_driver+0x14c driver_probe_device+0x3c __driver_probe_device+0xa0 really_probe+0x190 hid_device_probe+0x130 ps_probe+0x990 ps_led_register+0x94 devm_led_classdev_register_ext+0x58 led_classdev_register_ext+0x1f8 device_create_with_groups+0x48 device_create_groups_vargs+0xc8 device_add+0x244 kobject_uevent+0x14 kobject_uevent_env[jt]+0x224 mutex_unlock[jt]+0xc4 __mutex_unlock_slowpath+0xd4 wake_up_q+0x70 try_to_wake_up[jt]+0x48c preempt_schedule_common+0x28 __schedule+0x628 __switch_to+0x174 el0t_64_sync+0x1a8/0x1ac el0t_64_sync_handler+0x68/0xbc el0_svc+0x38/0x68 do_el0_svc+0x1c/0x28 el0_svc_common+0x80/0xe0 invoke_syscall+0x58/0x114 __arm64_sys_read+0x1c/0x2c ksys_read+0x78/0xe8 vfs_read+0x1e0/0x2c8 kernfs_fop_read_iter+0x68/0x1b4 seq_read_iter+0x158/0x4ec kernfs_seq_show+0x44/0x54 sysfs_kf_seq_show+0xb4/0x130 dev_attr_show+0x38/0x74 brightness_show+0x20/0x4c dualshock4_led_get_brightness+0xc/0x74 [ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 3313.874301][ T4013] Mem abort info: [ 3313.874303][ T4013] ESR = 0x0000000096000006 [ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits [ 3313.874307][ T4013] SET = 0, FnV = 0 [ 3313.874309][ T4013] EA = 0, S1PTW = 0 [ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault [ 3313.874313][ T4013] Data abort info: [ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000 .. [ 3313.874332][ T4013] Dumping ftrace buffer: [ 3313.874334][ T4013] (ftrace buffer empty) .. .. [ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader [ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74 [ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60 [ 3313.874656][ T4013] sp : ffffffc0b910bbd0 .. .. [ 3313.874685][ T4013] Call trace: [ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74 [ 3313.874690][ T4013] brightness_show+0x20/0x4c [ 3313.874692][ T4013] dev_attr_show+0x38/0x74 [ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130 [ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54 [ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec [ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4 [ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8 [ 3313.874711][ T4013] ksys_read+0x78/0xe8 [ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c [ 3313.874718][ T4013] invoke_syscall+0x58/0x114 [ 3313.874721][ T4013] el0_svc_common+0x80/0xe0 [ 3313.874724][ T4013] do_el0_svc+0x1c/0x28 [ 3313.874727][ T4013] el0_svc+0x38/0x68 [ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc [ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac 2025-04-25 CVE-2024-56587 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory. 2025-04-25 CVE-2024-56593 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error. 2025-04-25 CVE-2024-56600 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() sock_init_data() attaches the allocated sk object to the provided sock object. If ieee802154_create() fails later, the allocated sk object is freed, but the dangling pointer remains in the provided sock object, which may allow use-after-free. Clear the sk pointer in the sock object on error. 2025-04-25 CVE-2024-56602 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drm/dp_mst: Fix MST sideband message body length check Fix the MST sideband message body length check, which must be at least 1 byte accounting for the message body CRC (aka message data CRC) at the end of the message. This fixes a case where an MST branch device returns a header with a correct header CRC (indicating a correctly received body length), with the body length being incorrectly set to 0. This will later lead to a memory corruption in drm_dp_sideband_append_payload() and the following errors in dmesg: UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25 index -1 is out of range for type 'u8 [48]' Call Trace: drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper] drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper] drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper] memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256) Call Trace: drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper] drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper] drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper] 2025-04-25 CVE-2024-56616 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: can: dev: can_set_termination(): allow sleeping GPIOs In commit 6e86a1543c37 ("can: dev: provide optional GPIO based termination support") GPIO based termination support was added. For no particular reason that patch uses gpiod_set_value() to set the GPIO. This leads to the following warning, if the systems uses a sleeping GPIO, i.e. behind an I2C port expander: | WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c | CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the use of sleeping GPIOs. 2025-04-25 CVE-2024-56625 openEuler-24.03-LTS Low 3.3 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: LoongArch: Add architecture specific huge_pte_clear() When executing mm selftests run_vmtests.sh, there is such an error: BUG: Bad page state in process uffd-unit-tests pfn:00000 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0 flags: 0xffff0000002000(reserved|node=0|zone=0|lastcpupid=0xffff) raw: 00ffff0000002000 ffffbf0000000008 ffffbf0000000008 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Modules linked in: snd_seq_dummy snd_seq snd_seq_device rfkill vfat fat virtio_balloon efi_pstore virtio_net pstore net_failover failover fuse nfnetlink virtio_scsi virtio_gpu virtio_dma_buf dm_multipath efivarfs CPU: 2 UID: 0 PID: 1913 Comm: uffd-unit-tests Not tainted 6.12.0 #184 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 Stack : 900000047c8ac000 0000000000000000 9000000000223a7c 900000047c8ac000 900000047c8af690 900000047c8af698 0000000000000000 900000047c8af7d8 900000047c8af7d0 900000047c8af7d0 900000047c8af5b0 0000000000000001 0000000000000001 900000047c8af698 10b3c7d53da40d26 0000010000000000 0000000000000022 0000000fffffffff fffffffffe000000 ffff800000000000 000000000000002f 0000800000000000 000000017a6d4000 90000000028f8940 0000000000000000 0000000000000000 90000000025aa5e0 9000000002905000 0000000000000000 90000000028f8940 ffff800000000000 0000000000000000 0000000000000000 0000000000000000 9000000000223a94 000000012001839c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d ... Call Trace: [<9000000000223a94>] show_stack+0x5c/0x180 [<9000000001c3fd64>] dump_stack_lvl+0x6c/0xa0 [<900000000056aa08>] bad_page+0x1a0/0x1f0 [<9000000000574978>] free_unref_folios+0xbf0/0xd20 [<90000000004e65cc>] folios_put_refs+0x1a4/0x2b8 [<9000000000599a0c>] free_pages_and_swap_cache+0x164/0x260 [<9000000000547698>] tlb_batch_pages_flush+0xa8/0x1c0 [<9000000000547f30>] tlb_finish_mmu+0xa8/0x218 [<9000000000543cb8>] exit_mmap+0x1a0/0x360 [<9000000000247658>] __mmput+0x78/0x200 [<900000000025583c>] do_exit+0x43c/0xde8 [<9000000000256490>] do_group_exit+0x68/0x110 [<9000000000256554>] sys_exit_group+0x1c/0x20 [<9000000001c413b4>] do_syscall+0x94/0x130 [<90000000002216d8>] handle_syscall+0xb8/0x158 Disabling lock debugging due to kernel taint BUG: non-zero pgtables_bytes on freeing mm: -16384 On LoongArch system, invalid huge pte entry should be invalid_pte_table or a single _PAGE_HUGE bit rather than a zero value. And it should be the same with invalid pmd entry, since pmd_none() is called by function free_pgd_range() and pmd_none() return 0 by huge_pte_clear(). So single _PAGE_HUGE bit is also treated as a valid pte table and free_pte_range() will be called in free_pmd_range(). free_pmd_range() pmd = pmd_offset(pud, addr); do { next = pmd_addr_end(addr, end); if (pmd_none_or_clear_bad(pmd)) continue; free_pte_range(tlb, pmd, addr); } while (pmd++, addr = next, addr != end); Here invalid_pte_table is used for both invalid huge pte entry and pmd entry. 2025-04-25 CVE-2024-56628 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net: avoid potential UAF in default_operstate() syzbot reported an UAF in default_operstate() [1] Issue is a race between device and netns dismantles. After calling __rtnl_unlock() from netdev_run_todo(), we can not assume the netns of each device is still alive. Make sure the device is not in NETREG_UNREGISTERED state, and add an ASSERT_RTNL() before the call to __dev_get_by_index(). We might move this ASSERT_RTNL() in __dev_get_by_index() in the future. [1] BUG: KASAN: slab-use-after-free in __dev_get_by_index+0x5d/0x110 net/core/dev.c:852 Read of size 8 at addr ffff888043eba1b0 by task syz.0.0/5339 CPU: 0 UID: 0 PID: 5339 Comm: syz.0.0 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 __dev_get_by_index+0x5d/0x110 net/core/dev.c:852 default_operstate net/core/link_watch.c:51 [inline] rfc2863_policy+0x224/0x300 net/core/link_watch.c:67 linkwatch_do_dev+0x3e/0x170 net/core/link_watch.c:170 netdev_run_todo+0x461/0x1000 net/core/dev.c:10894 rtnl_unlock net/core/rtnetlink.c:152 [inline] rtnl_net_unlock include/linux/rtnetlink.h:133 [inline] rtnl_dellink+0x760/0x8d0 net/core/rtnetlink.c:3520 rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2541 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2a3cb80809 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2a3d9cd058 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2a3cd45fa0 RCX: 00007f2a3cb80809 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000008 RBP: 00007f2a3cbf393e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f2a3cd45fa0 R15: 00007ffd03bc65c8 </TASK> Allocated by task 5339: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kmalloc_array_noprof include/linux/slab.h:945 [inline] netdev_create_hash net/core/dev.c:11870 [inline] netdev_init+0x10c/0x250 net/core/dev.c:11890 ops_init+0x31e/0x590 net/core/net_namespace.c:138 setup_net+0x287/0x9e0 net/core/net_namespace.c:362 copy_net_ns+0x33f/0x570 net/core/net_namespace.c:500 create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228 ksys_unshare+0x57d/0xa70 kernel/fork.c:3314 __do_sys_unshare kernel/fork.c:3385 [inline] __se_sys_unshare kernel/fork.c:3383 [inline] __x64_sys_unshare+0x38/0x40 kernel/fork.c:3383 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x8 ---truncated--- 2025-04-25 CVE-2024-56635 openEuler-24.03-LTS High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: geneve: do not assume mac header is set in geneve_xmit_skb() We should not assume mac header is set in output path. Use skb_eth_hdr() instead of eth_hdr() to fix the issue. sysbot reported the following : WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 skb_mac_header include/linux/skbuff.h:3052 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 eth_hdr include/linux/if_ether.h:24 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit_skb drivers/net/geneve.c:898 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Modules linked in: CPU: 0 UID: 0 PID: 11635 Comm: syz.4.1423 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_mac_header include/linux/skbuff.h:3052 [inline] RIP: 0010:eth_hdr include/linux/if_ether.h:24 [inline] RIP: 0010:geneve_xmit_skb drivers/net/geneve.c:898 [inline] RIP: 0010:geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Code: 21 c6 02 e9 35 d4 ff ff e8 a5 48 4c fb 90 0f 0b 90 e9 fd f5 ff ff e8 97 48 4c fb 90 0f 0b 90 e9 d8 f5 ff ff e8 89 48 4c fb 90 <0f> 0b 90 e9 41 e4 ff ff e8 7b 48 4c fb 90 0f 0b 90 e9 cd e7 ff ff RSP: 0018:ffffc90003b2f870 EFLAGS: 00010283 RAX: 000000000000037a RBX: 000000000000ffff RCX: ffffc9000dc3d000 RDX: 0000000000080000 RSI: ffffffff86428417 RDI: 0000000000000003 RBP: ffffc90003b2f9f0 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff88806603c000 R13: 0000000000000000 R14: ffff8880685b2780 R15: 0000000000000e23 FS: 00007fdc2deed6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30a1dff8 CR3: 0000000056b8c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] __dev_direct_xmit+0x58a/0x720 net/core/dev.c:4490 dev_direct_xmit include/linux/netdevice.h:3181 [inline] packet_xmit+0x1e4/0x360 net/packet/af_packet.c:285 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x2700/0x5660 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x488/0x4f0 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xe0/0x1c0 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f 2025-04-25 CVE-2024-56636 openEuler-24.03-LTS Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: dccp: Fix memory leak in dccp_feat_change_recv If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed. Here is the kmemleak stack for this: unreferenced object 0xffff88801d4ab488 (size 8): comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes): 01 b4 4a 1d 80 88 ff ff ..J..... backtrace: [<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1 Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. 2025-04-25 CVE-2024-56643 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net/ipv6: release expired exception dst cached in socket Dst objects get leaked in ip6_negative_advice() when this function is executed for an expired IPv6 route located in the exception table. There are several conditions that must be fulfilled for the leak to occur: * an ICMPv6 packet indicating a change of the MTU for the path is received, resulting in an exception dst being created * a TCP connection that uses the exception dst for routing packets must start timing out so that TCP begins retransmissions * after the exception dst expires, the FIB6 garbage collector must not run before TCP executes ip6_negative_advice() for the expired exception dst When TCP executes ip6_negative_advice() for an exception dst that has expired and if no other socket holds a reference to the exception dst, the refcount of the exception dst is 2, which corresponds to the increment made by dst_init() and the increment made by the TCP socket for which the connection is timing out. The refcount made by the socket is never released. The refcount of the dst is decremented in sk_dst_reset() but that decrement is counteracted by a dst_hold() intentionally placed just before the sk_dst_reset() in ip6_negative_advice(). After ip6_negative_advice() has finished, there is no other object tied to the dst. The socket lost its reference stored in sk_dst_cache and the dst is no longer in the exception table. The exception dst becomes a leaked object. As a result of this dst leak, an unbalanced refcount is reported for the loopback device of a net namespace being destroyed under kernels that do not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"): unregister_netdevice: waiting for lo to become free. Usage count = 2 Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The patch that introduced the dst_hold() in ip6_negative_advice() was 92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22 merely refactored the code with regards to the dst refcount so the issue was present even before 92f1655aa2b22. The bug was introduced in 54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually expired.") where the expired cached route is deleted and the sk_dst_cache member of the socket is set to NULL by calling dst_negative_advice() but the refcount belonging to the socket is left unbalanced. The IPv4 version - ipv4_negative_advice() - is not affected by this bug. When the TCP connection times out ipv4_negative_advice() merely resets the sk_dst_cache of the socket while decrementing the refcount of the exception dst. 2025-04-25 CVE-2024-56644 openEuler-24.03-LTS Low 2.5 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_session_new(): fix skb reference counting Since j1939_session_skb_queue() does an extra skb_get() for each new skb, do the same for the initial one in j1939_session_new() to avoid refcount underflow. [mkl: clean up commit message] 2025-04-25 CVE-2024-56645 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: can: hi311x: hi3110_can_ist(): fix potential use-after-free The commit a22bd630cfff ("can: hi311x: do not report txerr and rxerr during bus-off") removed the reporting of rxerr and txerr even in case of correct operation (i. e. not bus-off). The error count information added to the CAN frame after netif_rx() is a potential use after free, since there is no guarantee that the skb is in the same state. It might be freed or reused. Fix the issue by postponing the netif_rx() call in case of txerr and rxerr reporting. 2025-04-25 CVE-2024-56651 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix race between element replace and close() Element replace (with a socket different from the one stored) may race with socket's close() link popping & unlinking. __sock_map_delete() unconditionally unrefs the (wrong) element: // set map[0] = s0 map_update_elem(map, 0, s0) // drop fd of s0 close(s0) sock_map_close() lock_sock(sk) (s0!) sock_map_remove_links(sk) link = sk_psock_link_pop() sock_map_unlink(sk, link) sock_map_delete_from_link // replace map[0] with s1 map_update_elem(map, 0, s1) sock_map_update_elem (s1!) lock_sock(sk) sock_map_update_common psock = sk_psock(sk) spin_lock(&stab->lock) osk = stab->sks[idx] sock_map_add_link(..., &stab->sks[idx]) sock_map_unref(osk, &stab->sks[idx]) psock = sk_psock(osk) sk_psock_put(sk, psock) if (refcount_dec_and_test(&psock)) sk_psock_drop(sk, psock) spin_unlock(&stab->lock) unlock_sock(sk) __sock_map_delete spin_lock(&stab->lock) sk = *psk // s1 replaced s0; sk == s1 if (!sk_test || sk_test == sk) // sk_test (s0) != sk (s1); no branch sk = xchg(psk, NULL) if (sk) sock_map_unref(sk, psk) // unref s1; sks[idx] will dangle psock = sk_psock(sk) sk_psock_put(sk, psock) if (refcount_dec_and_test()) sk_psock_drop(sk, psock) spin_unlock(&stab->lock) release_sock(sk) Then close(map) enqueues bpf_map_free_deferred, which finally calls sock_map_free(). This results in some refcount_t warnings along with a KASAN splat [1]. Fix __sock_map_delete(), do not allow sock_map_unref() on elements that may have been replaced. [1]: BUG: KASAN: slab-use-after-free in sock_map_free+0x10e/0x330 Write of size 4 at addr ffff88811f5b9100 by task kworker/u64:12/1063 CPU: 14 UID: 0 PID: 1063 Comm: kworker/u64:12 Not tainted 6.12.0+ #125 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Workqueue: events_unbound bpf_map_free_deferred Call Trace: <TASK> dump_stack_lvl+0x68/0x90 print_report+0x174/0x4f6 kasan_report+0xb9/0x190 kasan_check_range+0x10f/0x1e0 sock_map_free+0x10e/0x330 bpf_map_free_deferred+0x173/0x320 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x29e/0x360 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1202: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x85/0x90 kmem_cache_alloc_noprof+0x131/0x450 sk_prot_alloc+0x5b/0x220 sk_alloc+0x2c/0x870 unix_create1+0x88/0x8a0 unix_create+0xc5/0x180 __sock_create+0x241/0x650 __sys_socketpair+0x1ce/0x420 __x64_sys_socketpair+0x92/0x100 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 46: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kmem_cache_free+0x1a1/0x590 __sk_destruct+0x388/0x5a0 sk_psock_destroy+0x73e/0xa50 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x29e/0x360 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 The bu ---truncated--- 2025-04-25 CVE-2024-56664 openEuler-24.03-LTS High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: powerpc/mm/fault: Fix kfence page fault reporting copy_from_kernel_nofault() can be called when doing read of /proc/kcore. /proc/kcore can have some unmapped kfence objects which when read via copy_from_kernel_nofault() can cause page faults. Since *_nofault() functions define their own fixup table for handling fault, use that instead of asking kfence to handle such faults. Hence we search the exception tables for the nip which generated the fault. If there is an entry then we let the fixup table handler handle the page fault by returning an error from within ___do_page_fault(). This can be easily triggered if someone tries to do dd from /proc/kcore. eg. dd if=/proc/kcore of=/dev/null bs=1M Some example false negatives: =============================== BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0 Invalid read at 0xc0000000fdff0000: copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0 Use-after-free read at 0xc0000000fe050000 (in kfence-#2): copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec 2025-04-25 CVE-2024-56678 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio' If platform_get_resource_byname() fails and returns NULL because DT lacks an 'mmio' property for the MHI endpoint, dereferencing res->start will cause a NULL pointer access. Add a check to prevent it. [kwilczynski: error message update per the review feedback] [bhelgaas: commit log] 2025-04-25 CVE-2024-56689 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: bpf: fix recursive lock when verdict program return SK_PASS When the stream_verdict program returns SK_PASS, it places the received skb into its own receive queue, but a recursive lock eventually occurs, leading to an operating system deadlock. This issue has been present since v6.9. ''' sk_psock_strp_data_ready write_lock_bh(&sk->sk_callback_lock) strp_data_ready strp_read_sock read_sock -> tcp_read_sock strp_recv cb.rcv_msg -> sk_psock_strp_read # now stream_verdict return SK_PASS without peer sock assign __SK_PASS = sk_psock_map_verd(SK_PASS, NULL) sk_psock_verdict_apply sk_psock_skb_ingress_self sk_psock_skb_ingress_enqueue sk_psock_data_ready read_lock_bh(&sk->sk_callback_lock) <= dead lock ''' This topic has been discussed before, but it has not been fixed. Previous discussion: https://lore.kernel.org/all/6684a5864ec86_403d20898@john.notmuch 2025-04-25 CVE-2024-56694 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dmac_flt.c Add error pointer checks after calling otx2_mbox_get_rsp(). 2025-04-25 CVE-2024-56707 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_direct_read_write() The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked and pages remain pinned if ceph_alloc_sparse_ext_map() fails. There is no need to delay the allocation of sparse_ext map until after the bvecs array is set up, so fix this by moving sparse_ext allocation a bit earlier. Also, make a similar adjustment in __ceph_sync_read() for consistency (a leak of the same kind in __ceph_sync_read() has been addressed differently). 2025-04-25 CVE-2024-56710 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. 2025-04-25 CVE-2024-56723 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. 2025-04-25 CVE-2024-56724 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dcbnl.c Add error pointer check after calling otx2_mbox_get_rsp(). 2025-04-25 CVE-2024-56725 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c Adding error pointer check after calling otx2_mbox_get_rsp(). 2025-04-25 CVE-2024-56727 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ipv6: release nexthop on device removal The CI is hitting some aperiodic hangup at device removal time in the pmtu.sh self-test: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 6 ref_tracker: veth_A-R1@ffff888013df15d8 has 1/5 users at dst_init+0x84/0x4a0 dst_alloc+0x97/0x150 ip6_dst_alloc+0x23/0x90 ip6_rt_pcpu_alloc+0x1e6/0x520 ip6_pol_route+0x56f/0x840 fib6_rule_lookup+0x334/0x630 ip6_route_output_flags+0x259/0x480 ip6_dst_lookup_tail.constprop.0+0x5c2/0x940 ip6_dst_lookup_flow+0x88/0x190 udp_tunnel6_dst_lookup+0x2a7/0x4c0 vxlan_xmit_one+0xbde/0x4a50 [vxlan] vxlan_xmit+0x9ad/0xf20 [vxlan] dev_hard_start_xmit+0x10e/0x360 __dev_queue_xmit+0xf95/0x18c0 arp_solicit+0x4a2/0xe00 neigh_probe+0xaa/0xf0 While the first suspect is the dst_cache, explicitly tracking the dst owing the last device reference via probes proved such dst is held by the nexthop in the originating fib6_info. Similar to commit f5b51fe804ec ("ipv6: route: purge exception on removal"), we need to explicitly release the originating fib info when disconnecting a to-be-removed device from a live ipv6 dst: move the fib6_info cleanup into ip6_dst_ifdown(). Tested running: ./pmtu.sh cleanup_ipv6_exception in a tight loop for more than 400 iterations with no spat, running an unpatched kernel I observed a splat every ~10 iterations. 2025-04-25 CVE-2024-56751 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: crypto: caam - Fix the pointer passed to caam_qi_shutdown() The type of the last parameter given to devm_add_action_or_reset() is "struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to "struct device *". Pass the correct parameter to devm_add_action_or_reset() so that the resources are released as expected. 2025-04-25 CVE-2024-56754 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: btrfs: add a sanity check for btrfs root in btrfs_search_slot() Syzbot reports a null-ptr-deref in btrfs_search_slot(). The reproducer is using rescue=ibadroots, and the extent tree root is corrupted thus the extent tree is NULL. When scrub tries to search the extent tree to gather the needed extent info, btrfs_search_slot() doesn't check if the target root is NULL or not, resulting the null-ptr-deref. Add sanity check for btrfs root before using it in btrfs_search_slot(). 2025-04-25 CVE-2024-56774 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Remove the direct link to net_device The similar patch in siw is in the link: https://git.kernel.org/rdma/rdma/c/16b87037b48889 This problem also occurred in RXE. The following analyze this problem. In the following Call Traces: " BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0 net/core/dev.c:8782 Read of size 4 at addr ffff8880554640b0 by task kworker/1:4/5295 CPU: 1 UID: 0 PID: 5295 Comm: kworker/1:4 Not tainted 6.12.0-rc3-syzkaller-00399-g9197b73fd7bb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: infiniband ib_cache_event_task Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 dev_get_flags+0x188/0x1d0 net/core/dev.c:8782 rxe_query_port+0x12d/0x260 drivers/infiniband/sw/rxe/rxe_verbs.c:60 __ib_query_port drivers/infiniband/core/device.c:2111 [inline] ib_query_port+0x168/0x7d0 drivers/infiniband/core/device.c:2143 ib_cache_update+0x1a9/0xb80 drivers/infiniband/core/cache.c:1494 ib_cache_event_task+0xf3/0x1e0 drivers/infiniband/core/cache.c:1568 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> " 1). In the link [1], " infiniband syz2: set down " This means that on 839.350575, the event ib_cache_event_task was sent andi queued in ib_wq. 2). In the link [1], " team0 (unregistering): Port device team_slave_0 removed " It indicates that before 843.251853, the net device should be freed. 3). In the link [1], " BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0 " This means that on 850.559070, this slab-use-after-free problem occurred. In all, on 839.350575, the event ib_cache_event_task was sent and queued in ib_wq, before 843.251853, the net device veth was freed. on 850.559070, this event was executed, and the mentioned freed net device was called. Thus, the above call trace occurred. [1] https://syzkaller.appspot.com/x/log.txt?x=12e7025f980000 2025-04-25 CVE-2024-57795 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Remove direct link to net_device Do not manage a per device direct link to net_device. Rely on associated ib_devices net_device management, not doubling the effort locally. A badly managed local link to net_device was causing a 'KASAN: slab-use-after-free' exception during siw_query_port() call. 2025-04-25 CVE-2024-57857 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: iio: imu: kmx61: fix information leak in triggered buffer The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. 2025-04-25 CVE-2024-57908 openEuler-24.03-LTS High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer The 'data' array is allocated via kmalloc() and it is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Use kzalloc for the memory allocation to avoid pushing uninitialized information to userspace. 2025-04-25 CVE-2024-57911 openEuler-24.03-LTS High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: iio: pressure: zpa2326: fix information leak in triggered buffer The 'sample' local struct is used to push data to user space from a triggered buffer, but it has a hole between the temperature and the timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp). This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. 2025-04-25 CVE-2024-57912 openEuler-24.03-LTS High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: dm array: fix releasing a faulty array block twice in dm_array_cursor_end When dm_bm_read_lock() fails due to locking or checksum errors, it releases the faulty block implicitly while leaving an invalid output pointer behind. The caller of dm_bm_read_lock() should not operate on this invalid dm_block pointer, or it will lead to undefined result. For example, the dm_array_cursor incorrectly caches the invalid pointer on reading a faulty array block, causing a double release in dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put(). Reproduce steps: 1. initialize a cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. wipe the second array block offline dmsteup remove cache cmeta cdata corig mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try reopen the cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" Kernel logs: (snip) device-mapper: array: array_block_check failed: blocknr 0 != wanted 10 device-mapper: block manager: array validator check failed for block 10 device-mapper: array: get_ablock failed device-mapper: cache metadata: dm_array_cursor_next for mapping failed ------------[ cut here ]------------ kernel BUG at drivers/md/dm-bufio.c:638! Fix by setting the cached block pointer to NULL on errors. In addition to the reproducer described above, this fix can be verified using the "array_cursor/damaged" test in dm-unit: dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR> 2025-04-25 CVE-2024-57929 openEuler-24.03-LTS Medium 6.0 AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: Revert "libfs: fix infinite directory reads for offset dir" The current directory offset allocator (based on mtree_alloc_cyclic) stores the next offset value to return in octx->next_offset. This mechanism typically returns values that increase monotonically over time. Eventually, though, the newly allocated offset value wraps back to a low number (say, 2) which is smaller than other already- allocated offset values. Yu Kuai <yukuai3@huawei.com> reports that, after commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir"), if a directory's offset allocator wraps, existing entries are no longer visible via readdir/getdents because offset_readdir() stops listing entries once an entry's offset is larger than octx->next_offset. These entries vanish persistently -- they can be looked up, but will never again appear in readdir(3) output. The reason for this is that the commit treats directory offsets as monotonically increasing integer values rather than opaque cookies, and introduces this comparison: if (dentry2offset(dentry) >= last_index) { On 64-bit platforms, the directory offset value upper bound is 2^63 - 1. Directory offsets will monotonically increase for millions of years without wrapping. On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator can wrap after only a few weeks (at worst). Revert commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir") to prepare for a fix that can work properly on 32-bit systems and might apply to recent LTS kernels where shmem employs the simple_offset mechanism. 2025-04-25 CVE-2024-57952 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: don't allow 1 packet limit The current implementation does not work correctly with a limit of 1. iproute2 actually checks for this and this patch adds the check in kernel as well. This fixes the following syzkaller reported crash: UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x125/0x19f lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:148 [inline] __ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347 sfq_link net/sched/sch_sfq.c:210 [inline] sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238 sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500 sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296 netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline] dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362 __dev_close_many+0x214/0x350 net/core/dev.c:1468 dev_close_many+0x207/0x510 net/core/dev.c:1506 unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738 unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695 unregister_netdevice include/linux/netdevice.h:2893 [inline] __tun_detach+0x6b6/0x1600 drivers/net/tun.c:689 tun_detach drivers/net/tun.c:705 [inline] tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640 __fput+0x203/0x840 fs/file_table.c:280 task_work_run+0x129/0x1b0 kernel/task_work.c:185 exit_task_work include/linux/task_work.h:33 [inline] do_exit+0x5ce/0x2200 kernel/exit.c:931 do_group_exit+0x144/0x310 kernel/exit.c:1046 __do_sys_exit_group kernel/exit.c:1057 [inline] __se_sys_exit_group kernel/exit.c:1055 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055 do_syscall_64+0x6c/0xd0 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7fe5e7b52479 Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f. RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0 R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270 The crash can be also be reproduced with the following (with a tc recompiled to allow for sfq limits of 1): tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s ../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1 ifconfig dummy0 up ping -I dummy0 -f -c2 -W0.1 8.8.8.8 sleep 1 Scenario that triggers the crash: * the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1 * TBF dequeues: it peeks from SFQ which moves the packet to the gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so it schedules itself for later. * the second packet is sent and TBF tries to queues it to SFQ. qdisc qlen is now 2 and because the SFQ limit is 1 the packet is dropped by SFQ. At this point qlen is 1, and all of the SFQ slots are empty, however q->tail is not NULL. At this point, assuming no more packets are queued, when sch_dequeue runs again it will decrement the qlen for the current empty slot causing an underflow and the subsequent out of bounds access. 2025-04-25 CVE-2024-57996 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW Power Hypervisor can possibily allocate MMIO window intersecting with Dynamic DMA Window (DDW) range, which is over 32-bit addressing. These MMIO pages needs to be marked as reserved so that IOMMU doesn't map DMA buffers in this range. The current code is not marking these pages correctly which is resulting in LPAR to OOPS while booting. The stack is at below BUG: Unable to handle kernel data access on read at 0xc00800005cd40000 Faulting instruction address: 0xc00000000005cdac Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod Supported: Yes, External CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries Workqueue: events work_for_cpu_fn NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000 REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001 CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800 GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000 GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000 GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800 GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8 GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800 NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100 LR [c00000000005e830] iommu_init_table+0x80/0x1e0 Call Trace: [c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable) [c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40 [c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230 [c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90 [c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80 [c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net] [c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110 [c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60 [c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620 [c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620 [c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150 [c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 There are 2 issues in the code 1. The index is "int" while the address is "unsigned long". This results in negative value when setting the bitmap. 2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit address). MMIO address needs to be page shifted as well. 2025-04-25 CVE-2024-57999 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Remove dangling pointers When an async control is written, we copy a pointer to the file handle that started the operation. That pointer will be used when the device is done. Which could be anytime in the future. If the user closes that file descriptor, its structure will be freed, and there will be one dangling pointer per pending async control, that the driver will try to use. Clean all the dangling pointers during release(). To avoid adding a performance penalty in the most common case (no async operation), a counter has been introduced with some logic to make sure that it is properly handled. 2025-04-25 CVE-2024-58002 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: media: i2c: ds90ub9x3: Fix extra fwnode_handle_put() The ub913 and ub953 drivers call fwnode_handle_put(priv->sd.fwnode) as part of their remove process, and if the driver is removed multiple times, eventually leads to put "overflow", possibly causing memory corruption or crash. The fwnode_handle_put() is a leftover from commit 905f88ccebb1 ("media: i2c: ds90ub9x3: Fix sub-device matching"), which changed the code related to the sd.fwnode, but missed removing these fwnode_handle_put() calls. 2025-04-25 CVE-2024-58003 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: soc: qcom: socinfo: Avoid out of bounds read of serial number On MSM8916 devices, the serial number exposed in sysfs is constant and does not change across individual devices. It's always: db410c:/sys/devices/soc0$ cat serial_number 2644893864 The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not have support for the serial_num field in the socinfo struct. There is an existing check to avoid exposing the serial number in that case, but it's not correct: When checking the item_size returned by SMEM, we need to make sure the *end* of the serial_num is within bounds, instead of comparing with the *start* offset. The serial_number currently exposed on MSM8916 devices is just an out of bounds read of whatever comes after the socinfo struct in SMEM. Fix this by changing offsetof() to offsetofend(), so that the size of the field is also taken into account. 2025-04-25 CVE-2024-58007 openEuler-24.03-LTS High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc A NULL sock pointer is passed into l2cap_sock_alloc() when it is called from l2cap_sock_new_connection_cb() and the error handling paths should also be aware of it. Seemingly a more elegant solution would be to swap bt_sock_alloc() and l2cap_chan_create() calls since they are not interdependent to that moment but then l2cap_chan_create() adds the soon to be deallocated and still dummy-initialized channel to the global list accessible by many L2CAP paths. The channel would be removed from the list in short period of time but be a bit more straight-forward here and just check for NULL instead of changing the order of function calls. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. 2025-04-25 CVE-2024-58009 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: platform/x86: int3472: Check for adev == NULL Not all devices have an ACPI companion fwnode, so adev might be NULL. This can e.g. (theoretically) happen when a user manually binds one of the int3472 drivers to another i2c/platform device through sysfs. Add a check for adev not being set and return -ENODEV in that case to avoid a possible NULL pointer deref in skl_int3472_get_acpi_buffer(). 2025-04-25 CVE-2024-58011 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 Read of size 8 at addr ffff88814128f898 by task kworker/u9:4/5961 CPU: 1 UID: 0 PID: 5961 Comm: kworker/u9:4 Not tainted 6.12.0-syzkaller-10684-gf1cd565ce577 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 16026: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296 remove_adv_monitor+0x102/0x1b0 net/bluetooth/mgmt.c:5568 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 sock_write_iter+0x2d7/0x3f0 net/socket.c:1147 new_sync_write fs/read_write.c:586 [inline] vfs_write+0xaeb/0xd30 fs/read_write.c:679 ksys_write+0x18f/0x2b0 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 16022: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2338 [inline] slab_free mm/slub.c:4598 [inline] kfree+0x196/0x420 mm/slub.c:4746 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259 __mgmt_power_off+0x183/0x430 net/bluetooth/mgmt.c:9550 hci_dev_close_sync+0x6c4/0x11c0 net/bluetooth/hci_sync.c:5208 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline] hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508 sock_do_ioctl+0x158/0x460 net/socket.c:1209 sock_ioctl+0x626/0x8e0 net/socket.c:1328 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f 2025-04-25 CVE-2024-58013 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN() instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. 2025-04-25 CVE-2024-58014 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: safesetid: check size of policy writes syzbot attempts to write a buffer with a large size to a sysfs entry with writes handled by handle_policy_update(), triggering a warning in kmalloc. Check the size specified for write buffers before allocating. [PM: subject tweak] 2025-04-25 CVE-2024-58016 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which leads to undefined behavior. To prevent this, cast 1 to u32 before performing the shift, ensuring well-defined behavior. This change explicitly avoids any potential overflow by ensuring that the shift occurs on an unsigned 32-bit integer. 2025-04-25 CVE-2024-58017 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-sm6350: Add missing parent_map for two clocks If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for two clocks where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together. 2025-04-25 CVE-2024-58076 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix crash during unbind if gpio unit is in use We used the wrong device for the device managed functions. We used the usb device, when we should be using the interface device. If we unbind the driver from the usb interface, the cleanup functions are never called. In our case, the IRQ is never disabled. If an IRQ is triggered, it will try to access memory sections that are already free, causing an OOPS. We cannot use the function devm_request_threaded_irq here. The devm_* clean functions may be called after the main structure is released by uvc_delete. Luckily this bug has small impact, as it is only affected by devices with gpio units and the user has to unbind the device, a disconnect will not trigger this error. 2025-04-25 CVE-2024-58079 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: KVM: Explicitly verify target vCPU is online in kvm_get_vcpu() Explicitly verify the target vCPU is fully online _prior_ to clamping the index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will generate '0', i.e. KVM will return vCPU0 instead of NULL. In practice, the bug is unlikely to cause problems, as it will only come into play if userspace or the guest is buggy or misbehaving, e.g. KVM may send interrupts to vCPU0 instead of dropping them on the floor. However, returning vCPU0 when it shouldn't exist per online_vcpus is problematic now that KVM uses an xarray for the vCPUs array, as KVM needs to insert into the xarray before publishing the vCPU to userspace (see commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")), i.e. before vCPU creation is guaranteed to succeed. As a result, incorrectly providing access to vCPU0 will trigger a use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu() bails out of vCPU creation due to an error and frees vCPU0. Commit afb2acb2e3a3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but in doing so introduced an unsolvable teardown conundrum. Preventing accesses to vCPU0 before it's fully online will allow reverting commit afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race. 2025-04-25 CVE-2024-58083 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Stop active perfmon if it is being destroyed If the active performance monitor (`v3d->active_perfmon`) is being destroyed, stop it first. Currently, the active perfmon is not stopped during destruction, leaving the `v3d->active_perfmon` pointer stale. This can lead to undefined behavior and instability. This patch ensures that the active perfmon is stopped before being destroyed, aligning with the behavior introduced in commit 7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed"). 2025-04-25 CVE-2024-58086 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock when freeing cgroup storage The following commit bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]") first introduced deadlock prevention for fentry/fexit programs attaching on bpf_task_storage helpers. That commit also employed the logic in map free path in its v6 version. Later bpf_cgrp_storage was first introduced in c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs") which faces the same issue as bpf_task_storage, instead of its busy counter, NULL was passed to bpf_local_storage_map_free() which opened a window to cause deadlock: <TASK> (acquiring local_storage->lock) _raw_spin_lock_irqsave+0x3d/0x50 bpf_local_storage_update+0xd1/0x460 bpf_cgrp_storage_get+0x109/0x130 bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170 ? __bpf_prog_enter_recur+0x16/0x80 bpf_trampoline_6442485186+0x43/0xa4 cgroup_storage_ptr+0x9/0x20 (holding local_storage->lock) bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160 bpf_selem_unlink_storage+0x6f/0x110 bpf_local_storage_map_free+0xa2/0x110 bpf_map_free_deferred+0x5b/0x90 process_one_work+0x17c/0x390 worker_thread+0x251/0x360 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Progs: - A: SEC("fentry/cgroup_storage_ptr") - cgid (BPF_MAP_TYPE_HASH) Record the id of the cgroup the current task belonging to in this hash map, using the address of the cgroup as the map key. - cgrpa (BPF_MAP_TYPE_CGRP_STORAGE) If current task is a kworker, lookup the above hash map using function parameter @owner as the key to get its corresponding cgroup id which is then used to get a trusted pointer to the cgroup through bpf_cgroup_from_id(). This trusted pointer can then be passed to bpf_cgrp_storage_get() to finally trigger the deadlock issue. - B: SEC("tp_btf/sys_enter") - cgrpb (BPF_MAP_TYPE_CGRP_STORAGE) The only purpose of this prog is to fill Prog A's hash map by calling bpf_cgrp_storage_get() for as many userspace tasks as possible. Steps to reproduce: - Run A; - while (true) { Run B; Destroy B; } Fix this issue by passing its busy counter to the free procedure so it can be properly incremented before storage/smap locking. 2025-04-25 CVE-2024-58088 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: sched/core: Prevent rescheduling when interrupts are disabled David reported a warning observed while loop testing kexec jump: Interrupts enabled after irqrouter_resume+0x0/0x50 WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220 kernel_kexec+0xf6/0x180 __do_sys_reboot+0x206/0x250 do_syscall_64+0x95/0x180 The corresponding interrupt flag trace: hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90 hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90 That means __up_console_sem() was invoked with interrupts enabled. Further instrumentation revealed that in the interrupt disabled section of kexec jump one of the syscore_suspend() callbacks woke up a task, which set the NEED_RESCHED flag. A later callback in the resume path invoked cond_resched() which in turn led to the invocation of the scheduler: __cond_resched+0x21/0x60 down_timeout+0x18/0x60 acpi_os_wait_semaphore+0x4c/0x80 acpi_ut_acquire_mutex+0x3d/0x100 acpi_ns_get_node+0x27/0x60 acpi_ns_evaluate+0x1cb/0x2d0 acpi_rs_set_srs_method_data+0x156/0x190 acpi_pci_link_set+0x11c/0x290 irqrouter_resume+0x54/0x60 syscore_resume+0x6a/0x200 kernel_kexec+0x145/0x1c0 __do_sys_reboot+0xeb/0x240 do_syscall_64+0x95/0x180 This is a long standing problem, which probably got more visible with the recent printk changes. Something does a task wakeup and the scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and invokes schedule() from a completely bogus context. The scheduler enables interrupts after context switching, which causes the above warning at the end. Quite some of the code paths in syscore_suspend()/resume() can result in triggering a wakeup with the exactly same consequences. They might not have done so yet, but as they share a lot of code with normal operations it's just a question of time. The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling models. Full preemption is not affected as cond_resched() is disabled and the preemption check preemptible() takes the interrupt disabled flag into account. Cure the problem by adding a corresponding check into cond_resched(). 2025-04-25 CVE-2024-58090 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is used. 2025-04-25 CVE-2025-21636 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure. 2025-04-25 CVE-2025-21637 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: auth_enable: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure. 2025-04-25 CVE-2025-21638 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is used. 2025-04-25 CVE-2025-21640 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: filemap: avoid truncating 64-bit offset to 32 bits On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a 64-bit value to 32 bits, leading to a possible infinite loop when writing to an xfs filesystem. 2025-04-25 CVE-2025-21665 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: vsock: prevent null-ptr-deref in vsock_*[has_data|has_space] Recent reports have shown how we sometimes call vsock_*_has_data() when a vsock socket has been de-assigned from a transport (see attached links), but we shouldn't. Previous commits should have solved the real problems, but we may have more in the future, so to avoid null-ptr-deref, we can return 0 (no space, no data available) but with a warning. This way the code should continue to run in a nearly consistent state and have a warning that allows us to debug future problems. 2025-04-25 CVE-2025-21666 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: discard packets if the transport changes If the socket has been de-assigned or assigned to another transport, we must discard any packets received because they are not expected and would cause issues when we access vsk->transport. A possible scenario is described by Hyunwoo Kim in the attached link, where after a first connect() interrupted by a signal, and a second connect() failed, we can find `vsk->transport` at NULL, leading to a NULL pointer dereference. 2025-04-25 CVE-2025-21669 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Clear port select structure when fail to create Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]--- 2025-04-25 CVE-2025-21675 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Ratelimit warning logs to prevent VM denial of service If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM. 2025-04-25 CVE-2025-21690 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net: sched: fix ets qdisc OOB Indexing Haowei Yan <g1042620637@gmail.com> found that ets_class_from_arg() can index an Out-Of-Bound class in ets_class_from_arg() when passed clid of 0. The overflow may cause local privilege escalation. [ 18.852298] ------------[ cut here ]------------ [ 18.853271] UBSAN: array-index-out-of-bounds in net/sched/sch_ets.c:93:20 [ 18.853743] index 18446744073709551615 is out of range for type 'ets_class [16]' [ 18.854254] CPU: 0 UID: 0 PID: 1275 Comm: poc Not tainted 6.12.6-dirty #17 [ 18.854821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 18.856532] Call Trace: [ 18.857441] <TASK> [ 18.858227] dump_stack_lvl+0xc2/0xf0 [ 18.859607] dump_stack+0x10/0x20 [ 18.860908] __ubsan_handle_out_of_bounds+0xa7/0xf0 [ 18.864022] ets_class_change+0x3d6/0x3f0 [ 18.864322] tc_ctl_tclass+0x251/0x910 [ 18.864587] ? lock_acquire+0x5e/0x140 [ 18.865113] ? __mutex_lock+0x9c/0xe70 [ 18.866009] ? __mutex_lock+0xa34/0xe70 [ 18.866401] rtnetlink_rcv_msg+0x170/0x6f0 [ 18.866806] ? __lock_acquire+0x578/0xc10 [ 18.867184] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 18.867503] netlink_rcv_skb+0x59/0x110 [ 18.867776] rtnetlink_rcv+0x15/0x30 [ 18.868159] netlink_unicast+0x1c3/0x2b0 [ 18.868440] netlink_sendmsg+0x239/0x4b0 [ 18.868721] ____sys_sendmsg+0x3e2/0x410 [ 18.869012] ___sys_sendmsg+0x88/0xe0 [ 18.869276] ? rseq_ip_fixup+0x198/0x260 [ 18.869563] ? rseq_update_cpu_node_id+0x10a/0x190 [ 18.869900] ? trace_hardirqs_off+0x5a/0xd0 [ 18.870196] ? syscall_exit_to_user_mode+0xcc/0x220 [ 18.870547] ? do_syscall_64+0x93/0x150 [ 18.870821] ? __memcg_slab_free_hook+0x69/0x290 [ 18.871157] __sys_sendmsg+0x69/0xd0 [ 18.871416] __x64_sys_sendmsg+0x1d/0x30 [ 18.871699] x64_sys_call+0x9e2/0x2670 [ 18.871979] do_syscall_64+0x87/0x150 [ 18.873280] ? do_syscall_64+0x93/0x150 [ 18.874742] ? lock_release+0x7b/0x160 [ 18.876157] ? do_user_addr_fault+0x5ce/0x8f0 [ 18.877833] ? irqentry_exit_to_user_mode+0xc2/0x210 [ 18.879608] ? irqentry_exit+0x77/0xb0 [ 18.879808] ? clear_bhb_loop+0x15/0x70 [ 18.880023] ? clear_bhb_loop+0x15/0x70 [ 18.880223] ? clear_bhb_loop+0x15/0x70 [ 18.880426] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 18.880683] RIP: 0033:0x44a957 [ 18.880851] Code: ff ff e8 fc 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 8974 24 10 [ 18.881766] RSP: 002b:00007ffcdd00fad8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 18.882149] RAX: ffffffffffffffda RBX: 00007ffcdd010db8 RCX: 000000000044a957 [ 18.882507] RDX: 0000000000000000 RSI: 00007ffcdd00fb70 RDI: 0000000000000003 [ 18.885037] RBP: 00007ffcdd010bc0 R08: 000000000703c770 R09: 000000000703c7c0 [ 18.887203] R10: 0000000000000080 R11: 0000000000000246 R12: 0000000000000001 [ 18.888026] R13: 00007ffcdd010da8 R14: 00000000004ca7d0 R15: 0000000000000001 [ 18.888395] </TASK> [ 18.888610] ---[ end trace ]--- 2025-04-25 CVE-2025-21692 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Ensure job pointer is set to NULL after job completion After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished. 2025-04-25 CVE-2025-21697 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net: sched: Disallow replacing of child qdisc from one parent to another Lion Ackermann was able to create a UAF which can be abused for privilege escalation with the following script Step 1. create root qdisc tc qdisc add dev lo root handle 1:0 drr step2. a class for packet aggregation do demonstrate uaf tc class add dev lo classid 1:1 drr step3. a class for nesting tc class add dev lo classid 1:2 drr step4. a class to graft qdisc to tc class add dev lo classid 1:3 drr step5. tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024 step6. tc qdisc add dev lo parent 1:2 handle 3:0 drr step7. tc class add dev lo classid 3:1 drr step 8. tc qdisc add dev lo parent 3:1 handle 4:0 pfifo step 9. Display the class/qdisc layout tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 limit 1000p qdisc drr 3: dev lo parent 1:2 step10. trigger the bug <=== prevented by this patch tc qdisc replace dev lo parent 1:3 handle 4:0 step 11. Redisplay again the qdiscs/classes tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 1:3 root leaf 4: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p qdisc drr 3: dev lo parent 1:2 Observe that a) parent for 4:0 does not change despite the replace request. There can only be one parent. b) refcount has gone up by two for 4:0 and c) both class 1:3 and 3:1 are pointing to it. Step 12. send one packet to plug echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001)) step13. send one packet to the grafted fifo echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003)) step14. lets trigger the uaf tc class delete dev lo classid 1:3 tc class delete dev lo classid 1:1 The semantics of "replace" is for a del/add _on the same node_ and not a delete from one node(3:1) and add to another node (1:3) as in step10. While we could "fix" with a more complex approach there could be consequences to expectations so the patch takes the preventive approach of "disallow such config". Joint work with Lion Ackermann <nnamrec@gmail.com> 2025-04-25 CVE-2025-21700 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net: avoid race between device unregistration and ethnl ops The following trace can be seen if a device is being unregistered while its number of channels are being modified. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120 CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771 RIP: 0010:__mutex_lock+0xc8a/0x1120 Call Trace: <TASK> ethtool_check_max_channel+0x1ea/0x880 ethnl_set_channels+0x3c3/0xb10 ethnl_default_set_doit+0x306/0x650 genl_family_rcv_msg_doit+0x1e3/0x2c0 genl_rcv_msg+0x432/0x6f0 netlink_rcv_skb+0x13d/0x3b0 genl_rcv+0x28/0x40 netlink_unicast+0x42e/0x720 netlink_sendmsg+0x765/0xc20 __sys_sendto+0x3ac/0x420 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because unregister_netdevice_many_notify might run before the rtnl lock section of ethnl operations, eg. set_channels in the above example. In this example the rss lock would be destroyed by the device unregistration path before being used again, but in general running ethnl operations while dismantle has started is not a good idea. Fix this by denying any operation on devices being unregistered. A check was already there in ethnl_ops_begin, but not wide enough. Note that the same issue cannot be seen on the ioctl version (__dev_ethtool) because the device reference is retrieved from within the rtnl lock section there. Once dismantle started, the net device is unlisted and no reference will be found. 2025-04-25 CVE-2025-21701 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: kernel: be more careful about dup_mmap() failures and uprobe registering If a memory allocation fails during dup_mmap(), the maple tree can be left in an unsafe state for other iterators besides the exit path. All the locks are dropped before the exit_mmap() call (in mm/mmap.c), but the incomplete mm_struct can be reached through (at least) the rmap finding the vmas which have a pointer back to the mm_struct. Up to this point, there have been no issues with being able to find an mm_struct that was only partially initialised. Syzbot was able to make the incomplete mm_struct fail with recent forking changes, so it has been proven unsafe to use the mm_struct that hasn't been initialised, as referenced in the link below. Although 8ac662f5da19f ("fork: avoid inappropriate uprobe access to invalid mm") fixed the uprobe access, it does not completely remove the race. This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the oom side (even though this is extremely unlikely to be selected as an oom victim in the race window), and sets MMF_UNSTABLE to avoid other potential users from using a partially initialised mm_struct. When registering vmas for uprobe, skip the vmas in an mm that is marked unstable. Modifying a vma in an unstable mm may cause issues if the mm isn't fully initialised. 2025-04-25 CVE-2025-21709 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct md_bitmap_stats"), following panic is reported: Oops: general protection fault, probably for non-canonical address RIP: 0010:bitmap_get_stats+0x2b/0xa0 Call Trace: <TASK> md_seq_show+0x2d2/0x5b0 seq_read_iter+0x2b9/0x470 seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6c/0xf0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that bitmap_get_stats() can be called at anytime if mddev is still there, even if bitmap is destroyed, or not fully initialized. Deferenceing bitmap in this case can crash the kernel. Meanwhile, the above commit start to deferencing bitmap->storage, make the problem easier to trigger. Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex. 2025-04-25 CVE-2025-21712 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: nilfs2: handle errors that nilfs_prepare_chunk() may return Patch series "nilfs2: fix issues with rename operations". This series fixes BUG_ON check failures reported by syzbot around rename operations, and a minor behavioral issue where the mtime of a child directory changes when it is renamed instead of moved. This patch (of 2): The directory manipulation routines nilfs_set_link() and nilfs_delete_entry() rewrite the directory entry in the folio/page previously read by nilfs_find_entry(), so error handling is omitted on the assumption that nilfs_prepare_chunk(), which prepares the buffer for rewriting, will always succeed for these. And if an error is returned, it triggers the legacy BUG_ON() checks in each routine. This assumption is wrong, as proven by syzbot: the buffer layer called by nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may fail due to metadata corruption or other reasons. This has been there all along, but improved sanity checks and error handling may have made it more reproducible in fuzzing tests. Fix this issue by adding missing error paths in nilfs_set_link(), nilfs_delete_entry(), and their caller nilfs_rename(). 2025-04-25 CVE-2025-21721 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: NFC: nci: Add bounds checking in nci_hci_create_pipe() The "pipe" variable is a u8 which comes from the network. If it's more than 127, then it results in memory corruption in the caller, nci_hci_connect_gate(). 2025-04-25 CVE-2025-21735 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix use-after free in init error and remove paths devm_blk_crypto_profile_init() registers a cleanup handler to run when the associated (platform-) device is being released. For UFS, the crypto private data and pointers are stored as part of the ufs_hba's data structure 'struct ufs_hba::crypto_profile'. This structure is allocated as part of the underlying ufshcd and therefore Scsi_host allocation. During driver release or during error handling in ufshcd_pltfrm_init(), this structure is released as part of ufshcd_dealloc_host() before the (platform-) device associated with the crypto call above is released. Once this device is released, the crypto cleanup code will run, using the just-released 'struct ufs_hba::crypto_profile'. This causes a use-after-free situation: Call trace: kfree+0x60/0x2d8 (P) kvfree+0x44/0x60 blk_crypto_profile_destroy_callback+0x28/0x70 devm_action_release+0x1c/0x30 release_nodes+0x6c/0x108 devres_release_all+0x98/0x100 device_unbind_cleanup+0x20/0x70 really_probe+0x218/0x2d0 In other words, the initialisation code flow is: platform-device probe ufshcd_pltfrm_init() ufshcd_alloc_host() scsi_host_alloc() allocation of struct ufs_hba creation of scsi-host devices devm_blk_crypto_profile_init() devm registration of cleanup handler using platform-device and during error handling of ufshcd_pltfrm_init() or during driver removal: ufshcd_dealloc_host() scsi_host_put() put_device(scsi-host) release of struct ufs_hba put_device(platform-device) crypto cleanup handler To fix this use-after free, change ufshcd_alloc_host() to register a devres action to automatically cleanup the underlying SCSI device on ufshcd destruction, without requiring explicit calls to ufshcd_dealloc_host(). This way: * the crypto profile and all other ufs_hba-owned resources are destroyed before SCSI (as they've been registered after) * a memleak is plugged in tc-dwc-g210-pci.c remove() as a side-effect * EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as it's not needed anymore * no future drivers using ufshcd_alloc_host() could ever forget adding the cleanup 2025-04-25 CVE-2025-21739 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix DPE OoB read Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header. 2025-04-25 CVE-2025-21741 openEuler-24.03-LTS High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately. 2025-04-25 CVE-2025-21742 openEuler-24.03-LTS High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL. 2025-04-25 CVE-2025-21744 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: Input: synaptics - fix crash when enabling pass-through port When enabling a pass-through port an interrupt might come before psmouse driver binds to the pass-through port. However synaptics sub-driver tries to access psmouse instance presumably associated with the pass-through port to figure out if only 1 byte of response or entire protocol packet needs to be forwarded to the pass-through port and may crash if psmouse instance has not been attached to the port yet. Fix the crash by introducing open() and close() methods for the port and check if the port is open before trying to access psmouse instance. Because psmouse calls serio_open() only after attaching psmouse instance to serio port instance this prevents the potential crash. 2025-04-25 CVE-2025-21746 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix integer overflows on 32 bit systems On 32bit systems the addition operations in ipc_msg_alloc() can potentially overflow leading to memory corruption. Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow. 2025-04-25 CVE-2025-21748 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net: rose: lock the socket in rose_bind() syzbot reported a soft lockup in rose_loopback_timer(), with a repro calling bind() from multiple threads. rose_bind() must lock the socket to avoid this issue. 2025-04-25 CVE-2025-21749 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free when attempting to join an aborted transaction When we are trying to join the current transaction and if it's aborted, we read its 'aborted' field after unlocking fs_info->trans_lock and without holding any extra reference count on it. This means that a concurrent task that is aborting the transaction may free the transaction before we read its 'aborted' field, leading to a use-after-free. Fix this by reading the 'aborted' field while holding fs_info->trans_lock since any freeing task must first acquire that lock and set fs_info->running_transaction to NULL before freeing the transaction. This was reported by syzbot and Dmitry with the following stack traces from KASAN: ================================================================== BUG: KASAN: slab-use-after-free in join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 Read of size 4 at addr ffff888011839024 by task kworker/u4:9/1128 CPU: 0 UID: 0 PID: 1128 Comm: kworker/u4:9 Not tainted 6.13.0-rc7-syzkaller-00019-gc45323b7560e #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 flush_space+0x448/0xcf0 fs/btrfs/space-info.c:803 btrfs_async_reclaim_data_space+0x159/0x510 fs/btrfs/space-info.c:1321 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5315: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] join_transaction+0x144/0xda0 fs/btrfs/transaction.c:308 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 btrfs_create_common+0x1b2/0x2e0 fs/btrfs/inode.c:6572 lookup_open fs/namei.c:3649 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x1c03/0x3590 fs/namei.c:3984 do_filp_open+0x27f/0x4e0 fs/namei.c:4014 do_sys_openat2+0x13e/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_creat fs/open.c:1495 [inline] __se_sys_creat fs/open.c:1489 [inline] __x64_sys_creat+0x123/0x170 fs/open.c:1489 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5336: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 cleanup_transaction fs/btrfs/transaction.c:2063 [inline] btrfs_commit_transaction+0x2c97/0x3720 fs/btrfs/transaction.c:2598 insert_balance_item+0x1284/0x20b0 fs/btrfs/volumes.c:3757 btrfs_balance+0x992/ ---truncated--- 2025-04-25 CVE-2025-21753 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: add RCU protection to mld_newpack() mld_newpack() can be called without RTNL or RCU being held. Note that we no longer can use sock_alloc_send_skb() because ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep. Instead use alloc_skb() and charge the net->ipv6.igmp_sk socket under RCU protection. 2025-04-25 CVE-2025-21758 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: extend RCU protection in igmp6_send() igmp6_send() can be called without RTNL or RCU being held. Extend RCU protection so that we can safely fetch the net pointer and avoid a potential UAF. Note that we no longer can use sock_alloc_send_skb() because ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep. Instead use alloc_skb() and charge the net->ipv6.igmp_sk socket under RCU protection. 2025-04-25 CVE-2025-21759 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ndisc: extend RCU protection in ndisc_send_skb() ndisc_send_skb() can be called without RTNL or RCU held. Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu() and avoid a potential UAF. 2025-04-25 CVE-2025-21760 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: openvswitch: use RCU protection in ovs_vport_cmd_fill_info() ovs_vport_cmd_fill_info() can be called without RTNL or RCU. Use RCU protection and dev_net_rcu() to avoid potential UAF. 2025-04-25 CVE-2025-21761 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: arp: use RCU protection in arp_xmit() arp_xmit() can be called without RTNL or RCU protection. Use RCU protection to avoid potential UAF. 2025-04-25 CVE-2025-21762 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: neighbour: use RCU protection in __neigh_notify() __neigh_notify() can be called without RTNL or RCU protection. Use RCU protection to avoid potential UAF. 2025-04-25 CVE-2025-21763 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ndisc: use RCU protection in ndisc_alloc_skb() ndisc_alloc_skb() can be called without RTNL or RCU being held. Add RCU protection to avoid possible UAF. 2025-04-25 CVE-2025-21764 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU protection in ip6_default_advmss() ip6_default_advmss() needs rcu protection to make sure the net structure it reads does not disappear. 2025-04-25 CVE-2025-21765 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ipv4: use RCU protection in __ip_rt_update_pmtu() __ip_rt_update_pmtu() must use RCU protection to make sure the net structure it reads does not disappear. 2025-04-25 CVE-2025-21766 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: partitions: mac: fix handling of bogus partition table Fix several issues in partition probing: - The bailout for a bad partoffset must use put_dev_sector(), since the preceding read_part_sector() succeeded. - If the partition table claims a silly sector size like 0xfff bytes (which results in partition table entries straddling sector boundaries), bail out instead of accessing out-of-bounds memory. - We must not assume that the partition table contains proper NUL termination - use strnlen() and strncmp() instead of strlen() and strcmp(). 2025-04-25 CVE-2025-21772 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: fix potential NULL pointer dereference on udev->serial The driver assumed that es58x_dev->udev->serial could never be NULL. While this is true on commercially available devices, an attacker could spoof the device identity providing a NULL USB serial number. That would trigger a NULL pointer dereference. Add a check on es58x_dev->udev->serial before accessing it. 2025-04-25 CVE-2025-21773 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: can: ctucanfd: handle skb allocation failure If skb allocation fails, the pointer to struct can_frame is NULL. This is actually handled everywhere inside ctucan_err_interrupt() except for the only place. Add the missed NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. 2025-04-25 CVE-2025-21775 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and only if the local API is emulated/virtualized by KVM, and explicitly reject said hypercalls if the local APIC is emulated in userspace, i.e. don't rely on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID. Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if Hyper-V enlightenments are exposed to the guest without an in-kernel local APIC: dump_stack+0xbe/0xfd __kasan_report.cold+0x34/0x84 kasan_report+0x3a/0x50 __apic_accept_irq+0x3a/0x5c0 kvm_hv_send_ipi.isra.0+0x34e/0x820 kvm_hv_hypercall+0x8d9/0x9d0 kvm_emulate_hypercall+0x506/0x7e0 __vmx_handle_exit+0x283/0xb60 vmx_handle_exit+0x1d/0xd0 vcpu_enter_guest+0x16b0/0x24c0 vcpu_run+0xc0/0x550 kvm_arch_vcpu_ioctl_run+0x170/0x6d0 kvm_vcpu_ioctl+0x413/0xb20 __se_sys_ioctl+0x111/0x160 do_syscal1_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode can't be modified after vCPUs are created, i.e. if one vCPU has an in-kernel local APIC, then all vCPUs have an in-kernel local APIC. 2025-04-25 CVE-2025-21779 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table() It malicious user provides a small pptable through sysfs and then a bigger pptable, it may cause buffer overflow attack in function smu_sys_set_pp_table(). 2025-04-25 CVE-2025-21780 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix panic during interface removal Reference counting is used to ensure that batadv_hardif_neigh_node and batadv_hard_iface are not freed before/during batadv_v_elp_throughput_metric_update work is finished. But there isn't a guarantee that the hard if will remain associated with a soft interface up until the work is finished. This fixes a crash triggered by reboot that looks like this: Call trace: batadv_v_mesh_free+0xd0/0x4dc [batman_adv] batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x178/0x398 worker_thread+0x2e8/0x4d0 kthread+0xd8/0xdc ret_from_fork+0x10/0x20 (the batadv_v_mesh_free call is misleading, and does not actually happen) I was able to make the issue happen more reliably by changing hardif_neigh->bat_v.metric_work work to be delayed work. This allowed me to track down and confirm the fix. [sven@narfation.org: prevent entering batadv_v_elp_get_throughput without soft_iface] 2025-04-25 CVE-2025-21781 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode() In function psp_init_cap_microcode(), it should bail out when failed to load firmware, otherwise it may cause invalid memory access. 2025-04-25 CVE-2025-21784 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: vxlan: check vxlan_vnigroup_init() return value vxlan_init() must check vxlan_vnigroup_init() success otherwise a crash happens later, spotted by syzbot. Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167] CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912 Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00 RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18 RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000 R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000 FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942 unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824 unregister_netdevice_many net/core/dev.c:11866 [inline] unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736 register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901 __vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981 vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407 rtnl_newlink_create net/core/rtnetlink.c:3795 [inline] __rtnl_newlink net/core/rtnetlink.c:3906 [inline] 2025-04-25 CVE-2025-21790 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE socket option, a refcount leak will occur in ax25_release(). Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()") added decrement of device refcounts in ax25_release(). In order for that to work correctly the refcounts must already be incremented when the device is bound to the socket. An AX25 device can be bound to a socket by either calling ax25_bind() or setting SO_BINDTODEVICE socket option. In both cases the refcounts should be incremented, but in fact it is done only in ax25_bind(). This bug leads to the following issue reported by Syzkaller: ================================================================ refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31 Modules linked in: CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31 Call Trace: <TASK> __refcount_dec include/linux/refcount.h:336 [inline] refcount_dec include/linux/refcount.h:351 [inline] ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236 netdev_tracker_free include/linux/netdevice.h:4156 [inline] netdev_put include/linux/netdevice.h:4173 [inline] netdev_put include/linux/netdevice.h:4169 [inline] ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069 __sock_release+0xb0/0x270 net/socket.c:640 sock_close+0x1c/0x30 net/socket.c:1408 ... do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> ================================================================ Fix the implementation of ax25_setsockopt() by adding increment of refcounts for the new device bound, and decrement of refcounts for the old unbound device. 2025-04-25 CVE-2025-21792 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: spi: sn-f-ospi: Fix division by zero When there is no dummy cycle in the spi-nor commands, both dummy bus cycle bytes and width are zero. Because of the cpu's warning when divided by zero, the warning should be avoided. Return just zero to avoid such calculations. 2025-04-25 CVE-2025-21793 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: fbdev: omap: use threaded IRQ for LCD DMA When using touchscreen and framebuffer, Nokia 770 crashes easily with: BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000 Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2 Hardware name: Nokia 770 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x54/0x5c dump_stack_lvl from __schedule_bug+0x50/0x70 __schedule_bug from __schedule+0x4d4/0x5bc __schedule from schedule+0x34/0xa0 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4 __mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4 clk_prepare_lock from clk_set_rate+0x18/0x154 clk_set_rate from sossi_read_data+0x4c/0x168 sossi_read_data from hwa742_read_reg+0x5c/0x8c hwa742_read_reg from send_frame_handler+0xfc/0x300 send_frame_handler from process_pending_requests+0x74/0xd0 process_pending_requests from lcd_dma_irq_handler+0x50/0x74 lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130 __handle_irq_event_percpu from handle_irq_event+0x28/0x68 handle_irq_event from handle_level_irq+0x9c/0x170 handle_level_irq from generic_handle_domain_irq+0x2c/0x3c generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c generic_handle_arch_irq from call_with_stack+0x1c/0x24 call_with_stack from __irq_svc+0x94/0xa8 Exception stack(0xc5255da0 to 0xc5255de8) 5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248 5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94 5de0: 60000013 ffffffff __irq_svc from clk_prepare_lock+0x4c/0xe4 clk_prepare_lock from clk_get_rate+0x10/0x74 clk_get_rate from uwire_setup_transfer+0x40/0x180 uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664 spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498 __spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8 __spi_sync from spi_sync+0x24/0x40 spi_sync from ads7846_halfd_read_state+0x5c/0x1c0 ads7846_halfd_read_state from ads7846_irq+0x58/0x348 ads7846_irq from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x120/0x228 irq_thread from kthread+0xc8/0xe8 kthread from ret_from_fork+0x14/0x28 As a quick fix, switch to a threaded IRQ which provides a stable system. 2025-04-25 CVE-2025-21821 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject mismatching sum of field_len with set key length The field length description provides the length of each separated key field in the concatenation, each field gets rounded up to 32-bits to calculate the pipapo rule width from pipapo_init(). The set key length provides the total size of the key aligned to 32-bits. Register-based arithmetics still allows for combining mismatching set key length and field length description, eg. set key length 10 and field description [ 5, 4 ] leading to pipapo width of 12. 2025-04-25 CVE-2025-21826 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: landlock: Handle weird files A corrupted filesystem (e.g. bcachefs) might return weird files. Instead of throwing a warning and allowing access to such file, treat them as regular files. 2025-04-25 CVE-2025-21830 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1 commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the policy that all PCIe ports are allowed to use D3. When the system is suspended if the port is not power manageable by the platform and won't be used for wakeup via a PME this sets up the policy for these ports to go into D3hot. This policy generally makes sense from an OSPM perspective but it leads to problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a specific old BIOS. This manifests as a system hang. On the affected Device + BIOS combination, add a quirk for the root port of the problematic controller to ensure that these root ports are not put into D3hot at suspend. This patch is based on https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com but with the added condition both in the documentation and in the code to apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only the affected root ports. 2025-04-25 CVE-2025-21831 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: fix MIDI Streaming descriptor lengths While the MIDI jacks are configured correctly, and the MIDIStreaming endpoint descriptors are filled with the correct information, bNumEmbMIDIJack and bLength are set incorrectly in these descriptors. This does not matter when the numbers of in and out ports are equal, but when they differ the host will receive broken descriptors with uninitialized stack memory leaking into the descriptor for whichever value is smaller. The precise meaning of "in" and "out" in the port counts is not clearly defined and can be confusing. But elsewhere the driver consistently uses this to match the USB meaning of IN and OUT viewed from the host, so that "in" ports send data to the host and "out" ports receive data from it. 2025-04-25 CVE-2025-21835 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: reallocate buf lists on upgrade IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it was created for legacy selected buffer and has been emptied. It violates the requirement that most of the field should stay stable after publish. Always reallocate it instead. 2025-04-25 CVE-2025-21836 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: flush gadget workqueue after device removal device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up. 2025-04-25 CVE-2025-21838 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference. 2025-04-25 CVE-2025-21847 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference. 2025-04-25 CVE-2025-21848 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Don't reference skb after sending to VIOS Previously, after successfully flushing the xmit buffer to VIOS, the tx_bytes stat was incremented by the length of the skb. It is invalid to access the skb memory after sending the buffer to the VIOS because, at any point after sending, the VIOS can trigger an interrupt to free this memory. A race between reading skb->len and freeing the skb is possible (especially during LPM) and will result in use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic] Read of size 4 at addr c00000024eb48a70 by task hxecom/14495 <...> Call Trace: [c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable) [c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0 [c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8 [c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0 [c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic] [c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358 <...> Freed by task 0: kasan_save_stack+0x34/0x68 kasan_save_track+0x2c/0x50 kasan_save_free_info+0x64/0x108 __kasan_mempool_poison_object+0x148/0x2d4 napi_skb_cache_put+0x5c/0x194 net_tx_action+0x154/0x5b8 handle_softirqs+0x20c/0x60c do_softirq_own_stack+0x6c/0x88 <...> The buggy address belongs to the object at c00000024eb48a00 which belongs to the cache skbuff_head_cache of size 224 ================================================================== 2025-04-25 CVE-2025-21855 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix error handling causing NULL dereference tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower] 2025-04-25 CVE-2025-21857 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: geneve: Fix use-after-free in geneve_find_dev(). syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac #24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_n ---truncated--- 2025-04-25 CVE-2025-21858 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: USB: gadget: f_midi: f_midi_complete to call queue_work When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler. 2025-04-25 CVE-2025-21859 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix incorrect initialization order Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. 2025-04-25 CVE-2025-21862 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC Erhard reported the following KASAN hit while booting his PowerMac G4 with a KASAN-enabled kernel 6.13-rc6: BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8 Write of size 8 at addr f1000000 by task chronyd/1293 CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2 Tainted: [W]=WARN Hardware name: PowerMac3,6 7455 0x80010303 PowerMac Call Trace: [c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable) [c24375b0] [c0504998] print_report+0xdc/0x504 [c2437610] [c050475c] kasan_report+0xf8/0x108 [c2437690] [c0505a3c] kasan_check_range+0x24/0x18c [c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8 [c24376c0] [c004c014] patch_instructions+0x15c/0x16c [c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c [c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac [c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec [c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478 [c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14 [c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4 [c24379d0] [c027111c] do_seccomp+0x3dc/0x1890 [c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420 [c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c --- interrupt: c00 at 0x5a1274 NIP: 005a1274 LR: 006a3b3c CTR: 005296c8 REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4) MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000 GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932 GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57 GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002 GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001 NIP [005a1274] 0x5a1274 LR [006a3b3c] 0x6a3b3c --- interrupt: c00 The buggy address belongs to the virtual mapping at [f1000000, f1002000) created by: text_area_cpu_up+0x20/0x190 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30 flags: 0x80000000(zone=2) raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001 raw: 00000000 page dumped because: kasan: bad access detected Memory state around the buggy address: f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not initialised hence not supposed to be used yet. Powerpc text patching infrastructure allocates a virtual memory area using get_vm_area() and flags it as VM_ALLOC. But that flag is meant to be used for vmalloc() and vmalloc() allocated memory is not supposed to be used before a call to __vmalloc_node_range() which is never called for that area. That went undetected until commit e4137f08816b ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") The area allocated by text_area_cpu_up() is not vmalloc memory, it is mapped directly on demand when needed by map_kernel_page(). There is no VM flag corresponding to such usage, so just pass no flag. That way the area will be unpoisonned and usable immediately. 2025-04-25 CVE-2025-21866 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type() KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The cause of the issue was that eth_skb_pkt_type() accessed skb's data that didn't contain an Ethernet header. This occurs when bpf_prog_test_run_xdp() passes an invalid value as the user_data argument to bpf_test_init(). Fix this by returning an error when user_data is less than ETH_HLEN in bpf_test_init(). Additionally, remove the check for "if (user_size > size)" as it is unnecessary. [1] BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 eth_skb_pkt_type include/linux/etherdevice.h:627 [inline] eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165 __xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635 xdp_recv_frames net/bpf/test_run.c:272 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318 bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371 __sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777 __do_sys_bpf kernel/bpf/syscall.c:5866 [inline] __se_sys_bpf kernel/bpf/syscall.c:5864 [inline] __x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864 x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: free_pages_prepare mm/page_alloc.c:1056 [inline] free_unref_page+0x156/0x1320 mm/page_alloc.c:2657 __free_pages+0xa3/0x1b0 mm/page_alloc.c:4838 bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline] ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235 bpf_map_free kernel/bpf/syscall.c:838 [inline] bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310 worker_thread+0xedf/0x1550 kernel/workqueue.c:3391 kthread+0x535/0x6b0 kernel/kthread.c:389 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 2025-04-25 CVE-2025-21867 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier 2025-04-25 CVE-2025-21870 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix supplicant wait loop OP-TEE supplicant is a user-space daemon and it's possible for it be hung or crashed or killed in the middle of processing an OP-TEE RPC call. It becomes more complicated when there is incorrect shutdown ordering of the supplicant process vs the OP-TEE client application which can eventually lead to system hang-up waiting for the closure of the client application. Allow the client process waiting in kernel for supplicant response to be killed rather than indefinitely waiting in an unkillable state. Also, a normal uninterruptible wait should not have resulted in the hung-task watchdog getting triggered, but the endless loop would. This fixes issues observed during system reboot/shutdown when supplicant got hung for some reason or gets crashed/killed which lead to client getting hung in an unkillable state. It in turn lead to system being in hung up state requiring hard power off/on to recover. 2025-04-25 CVE-2025-21871 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: bsg: Fix crash when arpmb command fails If the device doesn't support arpmb we'll crash due to copying user data in bsg_transport_sg_io_fn(). In the case where ufs_bsg_exec_advanced_rpmb_req() returns an error, do not set the job's reply_len. Memory crash backtrace: 3,1290,531166405,-;ufshcd 0000:00:12.5: ARPMB OP failed: error code -22 4,1308,531166555,-;Call Trace: 4,1309,531166559,-; <TASK> 4,1310,531166565,-; ? show_regs+0x6d/0x80 4,1311,531166575,-; ? die+0x37/0xa0 4,1312,531166583,-; ? do_trap+0xd4/0xf0 4,1313,531166593,-; ? do_error_trap+0x71/0xb0 4,1314,531166601,-; ? usercopy_abort+0x6c/0x80 4,1315,531166610,-; ? exc_invalid_op+0x52/0x80 4,1316,531166622,-; ? usercopy_abort+0x6c/0x80 4,1317,531166630,-; ? asm_exc_invalid_op+0x1b/0x20 4,1318,531166643,-; ? usercopy_abort+0x6c/0x80 4,1319,531166652,-; __check_heap_object+0xe3/0x120 4,1320,531166661,-; check_heap_object+0x185/0x1d0 4,1321,531166670,-; __check_object_size.part.0+0x72/0x150 4,1322,531166679,-; __check_object_size+0x23/0x30 4,1323,531166688,-; bsg_transport_sg_io_fn+0x314/0x3b0 2025-04-25 CVE-2025-21873 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix endpoint checking in genelink_bind() Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing. [1] Syzbot report: usb 5-1: Manufacturer: syz usb 5-1: SerialNumber: syz usb 5-1: config 0 descriptor?? gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ... ------------[ cut here ]------------ usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Modules linked in: CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:3827 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_resolve_output net/core/neighbour.c:1514 [inline] neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494 neigh_output include/net/neighbour.h:539 [inline] ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819 mld_send_cr net/ipv6/mcast.c:2120 [inline] mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651 process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> 2025-04-25 CVE-2025-21877 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: i2c: npcm: disable interrupt enable bit before devm_request_irq The customer reports that there is a soft lockup issue related to the i2c driver. After checking, the i2c module was doing a tx transfer and the bmc machine reboots in the middle of the i2c transaction, the i2c module keeps the status without being reset. Due to such an i2c module status, the i2c irq handler keeps getting triggered since the i2c irq handler is registered in the kernel booting process after the bmc machine is doing a warm rebooting. The continuous triggering is stopped by the soft lockup watchdog timer. Disable the interrupt enable bit in the i2c module before calling devm_request_irq to fix this issue since the i2c relative status bit is read-only. Here is the soft lockup log. [ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1] [ 28.183351] Modules linked in: [ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1 [ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.208128] pc : __do_softirq+0xb0/0x368 [ 28.212055] lr : __do_softirq+0x70/0x368 [ 28.215972] sp : ffffff8035ebca00 [ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780 [ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0 [ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b [ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff [ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000 [ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2 [ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250 [ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434 [ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198 [ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40 [ 28.290611] Call trace: [ 28.293052] __do_softirq+0xb0/0x368 [ 28.296625] __irq_exit_rcu+0xe0/0x100 [ 28.300374] irq_exit+0x14/0x20 [ 28.303513] handle_domain_irq+0x68/0x90 [ 28.307440] gic_handle_irq+0x78/0xb0 [ 28.311098] call_on_irq_stack+0x20/0x38 [ 28.315019] do_interrupt_handler+0x54/0x5c [ 28.319199] el1_interrupt+0x2c/0x4c [ 28.322777] el1h_64_irq_handler+0x14/0x20 [ 28.326872] el1h_64_irq+0x74/0x78 [ 28.330269] __setup_irq+0x454/0x780 [ 28.333841] request_threaded_irq+0xd0/0x1b4 [ 28.338107] devm_request_threaded_irq+0x84/0x100 [ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0 [ 28.346990] platform_probe+0x6c/0xc4 [ 28.350653] really_probe+0xcc/0x45c [ 28.354227] __driver_probe_device+0x8c/0x160 [ 28.358578] driver_probe_device+0x44/0xe0 [ 28.362670] __driver_attach+0x124/0x1d0 [ 28.366589] bus_for_each_dev+0x7c/0xe0 [ 28.370426] driver_attach+0x28/0x30 [ 28.373997] bus_add_driver+0x124/0x240 [ 28.377830] driver_register+0x7c/0x124 [ 28.381662] __platform_driver_register+0x2c/0x34 [ 28.386362] npcm_i2c_init+0x3c/0x5c [ 28.389937] do_one_initcall+0x74/0x230 [ 28.393768] kernel_init_freeable+0x24c/0x2b4 [ 28.398126] kernel_init+0x28/0x130 [ 28.401614] ret_from_fork+0x10/0x20 [ 28.405189] Kernel panic - not syncing: softlockup: hung tasks [ 28.411011] SMP: stopping secondary CPUs [ 28.414933] Kernel Offset: disabled [ 28.418412] CPU features: 0x00000000,00000802 [ 28.427644] Rebooting in 20 seconds.. 2025-04-25 CVE-2025-21878 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: uprobes: Reject the shared zeropage in uprobe_write_opcode() We triggered the following crash in syzkaller tests: BUG: Bad page state in process syz.7.38 pfn:1eff3 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3 flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff) raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x32/0x50 bad_page+0x69/0xf0 free_unref_page_prepare+0x401/0x500 free_unref_page+0x6d/0x1b0 uprobe_write_opcode+0x460/0x8e0 install_breakpoint.part.0+0x51/0x80 register_for_each_vma+0x1d9/0x2b0 __uprobe_register+0x245/0x300 bpf_uprobe_multi_link_attach+0x29b/0x4f0 link_create+0x1e2/0x280 __sys_bpf+0x75f/0xac0 __x64_sys_bpf+0x1a/0x30 do_syscall_64+0x56/0x100 entry_SYSCALL_64_after_hwframe+0x78/0xe2 BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1 The following syzkaller test case can be used to reproduce: r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8) write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10) r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0) mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0) r5 = userfaultfd(0x80801) ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20}) r6 = userfaultfd(0x80801) ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140)) ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2}) ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}}) r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94) bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40) The cause is that zero pfn is set to the PTE without increasing the RSS count in mfill_atomic_pte_zeropage() and the refcount of zero folio does not increase accordingly. Then, the operation on the same pfn is performed in uprobe_write_opcode()->__replace_page() to unconditional decrease the RSS count and old_folio's refcount. Therefore, two bugs are introduced: 1. The RSS count is incorrect, when process exit, the check_mm() report error "Bad rss-count". 2. The reserved folio (zero folio) is freed when folio->refcount is zero, then free_pages_prepare->free_page_is_bad() report error "Bad page state". There is more, the following warning could also theoretically be triggered: __replace_page() -> ... -> folio_remove_rmap_pte() -> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio) Considering that uprobe hit on the zero folio is a very rare case, just reject zero old folio immediately after get_user_page_vma_remote(). [ mingo: Cleaned up the changelog ] 2025-04-25 CVE-2025-21881 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ice: Fix deinitializing VF in error path If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself). 2025-04-25 CVE-2025-21883 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also. 2025-04-25 CVE-2025-21885 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a WARN during dereg_mr for DM type Memory regions (MR) of type DM (device memory) do not have an associated umem. In the __mlx5_ib_dereg_mr() -> mlx5_free_priv_descs() flow, the code incorrectly takes the wrong branch, attempting to call dma_unmap_single() on a DMA address that is not mapped. This results in a WARN [1], as shown below. The issue is resolved by properly accounting for the DM type and ensuring the correct branch is selected in mlx5_free_priv_descs(). [1] WARNING: CPU: 12 PID: 1346 at drivers/iommu/dma-iommu.c:1230 iommu_dma_unmap_page+0x79/0x90 Modules linked in: ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry ovelay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 12 UID: 0 PID: 1346 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1631 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 49 3b 29 72 26 49 3b 69 08 73 20 4d 89 f0 44 89 e9 4c 89 e2 48 89 ee 48 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 07 b8 88 ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 66 0f 1f 44 00 RSP: 0018:ffffc90001913a10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810194b0a8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88810194b0a8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f537abdd740(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f537aeb8000 CR3: 000000010c248001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x84/0x190 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0xf8/0x1c0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 dma_unmap_page_attrs+0xe6/0x290 mlx5_free_priv_descs+0xb0/0xe0 [mlx5_ib] __mlx5_ib_dereg_mr+0x37e/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f537adaf17b Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffff218f0b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffff218f1d8 RCX: 00007f537adaf17b RDX: 00007ffff218f1c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffff218f1a0 R08: 00007f537aa8d010 R09: 0000561ee2e4f270 R10: 00007f537aace3a8 R11: 0000000000000246 R12: 00007ffff218f190 R13: 000000000000001c R14: 0000561ee2e4d7c0 R15: 00007ffff218f450 </TASK> 2025-04-25 CVE-2025-21888 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix the recovery flow of the UMR QP This patch addresses an issue in the recovery flow of the UMR QP, ensuring tasks do not get stuck, as highlighted by the call trace [1]. During recovery, before transitioning the QP to the RESET state, the software must wait for all outstanding WRs to complete. Failing to do so can cause the firmware to skip sending some flushed CQEs with errors and simply discard them upon the RESET, as per the IB specification. This race condition can result in lost CQEs and tasks becoming stuck. To resolve this, the patch sends a final WR which serves only as a barrier before moving the QP state to RESET. Once a CQE is received for that final WR, it guarantees that no outstanding WRs remain, making it safe to transition the QP to RESET and subsequently back to RTS, restoring proper functionality. Note: For the barrier WR, we simply reuse the failed and ready WR. Since the QP is in an error state, it will only receive IB_WC_WR_FLUSH_ERR. However, as it serves only as a barrier we don't care about its status. [1] INFO: task rdma_resource_l:1922 blocked for more than 120 seconds. Tainted: G W 6.12.0-rc7+ #1626 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:rdma_resource_l state:D stack:0 pid:1922 tgid:1922 ppid:1369 flags:0x00004004 Call Trace: <TASK> __schedule+0x420/0xd30 schedule+0x47/0x130 schedule_timeout+0x280/0x300 ? mark_held_locks+0x48/0x80 ? lockdep_hardirqs_on_prepare+0xe5/0x1a0 wait_for_completion+0x75/0x130 mlx5r_umr_post_send_wait+0x3c2/0x5b0 [mlx5_ib] ? __pfx_mlx5r_umr_done+0x10/0x10 [mlx5_ib] mlx5r_umr_revoke_mr+0x93/0xc0 [mlx5_ib] __mlx5_ib_dereg_mr+0x299/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? __lock_acquire+0x64e/0x2080 ? mark_held_locks+0x48/0x80 ? find_held_lock+0x2d/0xa0 ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? __fget_files+0xc3/0x1b0 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f99c918b17b RSP: 002b:00007ffc766d0468 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc766d0578 RCX: 00007f99c918b17b RDX: 00007ffc766d0560 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffc766d0540 R08: 00007f99c8f99010 R09: 000000000000bd7e R10: 00007f99c94c1c70 R11: 0000000000000246 R12: 00007ffc766d0530 R13: 000000000000001c R14: 0000000040246a80 R15: 0000000000000000 </TASK> 2025-04-25 CVE-2025-21892 openEuler-24.03-LTS Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same perf_event_pmu_context, but not in the same order. The problem is that the order of pmu_ctx_list for the parent is impacted by the time when an event/PMU is added. While the order for a child is impacted by the event order in the pinned_groups and flexible_groups. So the order of pmu_ctx_list in the parent and child may be different. To fix this problem, insert the perf_event_pmu_context to its proper place after iteration of the pmu_ctx_list. The follow testcase can trigger above warning: # perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out & # perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out test.c void main() { int count = 0; pid_t pid; printf("%d running\n", getpid()); sleep(30); printf("running\n"); pid = fork(); if (pid == -1) { printf("fork error\n"); return; } if (pid == 0) { while (1) { count++; } } else { while (1) { count++; } } } The testcase first opens an LBR event, so it will allocate task_ctx_data, and then open tracepoint and software events, so the parent context will have 3 different perf_event_pmu_contexts. On inheritance, child ctx will insert the perf_event_pmu_context in another order and the warning will trigger. [ mingo: Tidied up the changelog. ] 2025-04-25 CVE-2025-21895 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ftrace: Avoid potential division by zero in function_stat_show() Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64} produce zero and skip stddev computation in that case. For now don't care about rec->counter * rec->counter overflow because rec->time * rec->time overflow will likely happen earlier. 2025-04-25 CVE-2025-21898 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: tracing: Fix bad hist from corrupting named_triggers list The following commands causes a crash: ~# cd /sys/kernel/tracing/events/rcu/rcu_callback ~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=bad:keys=common_pid' > trigger Because the following occurs: event_trigger_write() { trigger_process_regex() { event_hist_trigger_parse() { data = event_trigger_alloc(..); event_trigger_register(.., data) { cmd_ops->reg(.., data, ..) [hist_register_trigger()] { data->ops->init() [event_hist_trigger_init()] { save_named_trigger(name, data) { list_add(&data->named_list, &named_triggers); } } } } ret = create_actions(); (return -EINVAL) if (ret) goto out_unreg; [..] ret = hist_trigger_enable(data, ...) { list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!) [..] out_unreg: event_hist_unregister(.., data) { cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] { list_for_each_entry(iter, &file->triggers, list) { if (!hist_trigger_match(data, iter, named_data, false)) <- never matches continue; [..] test = iter; } if (test && test->ops->free) <<<-- test is NULL test->ops->free(test) [event_hist_trigger_free()] { [..] if (data->name) del_named_trigger(data) { list_del(&data->named_list); <<<<-- NEVER gets removed! } } } } [..] kfree(data); <<<-- frees item but it is still on list The next time a hist with name is registered, it causes an u-a-f bug and the kernel can crash. Move the code around such that if event_trigger_register() succeeds, the next thing called is hist_trigger_enable() which adds it to the list. A bunch of actions is called if get_named_trigger_data() returns false. But that doesn't need to be called after event_trigger_register(), so it can be moved up, allowing event_trigger_register() to be called just before hist_trigger_enable() keeping them together and allowing the file->triggers to be properly populated. 2025-04-25 CVE-2025-21899 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: regulatory: improve invalid hints checking Syzbot keeps reporting an issue [1] that occurs when erroneous symbols sent from userspace get through into user_alpha2[] via regulatory_hint_user() call. Such invalid regulatory hints should be rejected. While a sanity check from commit 47caf685a685 ("cfg80211: regulatory: reject invalid hints") looks to be enough to deter these very cases, there is a way to get around it due to 2 reasons. 1) The way isalpha() works, symbols other than latin lower and upper letters may be used to determine a country/domain. For instance, greek letters will also be considered upper/lower letters and for such characters isalpha() will return true as well. However, ISO-3166-1 alpha2 codes should only hold latin characters. 2) While processing a user regulatory request, between reg_process_hint_user() and regulatory_hint_user() there happens to be a call to queue_regulatory_request() which modifies letters in request->alpha2[] with toupper(). This works fine for latin symbols, less so for weird letter characters from the second part of _ctype[]. Syzbot triggers a warning in is_user_regdom_saved() by first sending over an unexpected non-latin letter that gets malformed by toupper() into a character that ends up failing isalpha() check. Prevent this by enhancing is_an_alpha2() to ensure that incoming symbols are latin letters and nothing else. [1] Syzbot report: ------------[ cut here ]------------ Unexpected user alpha2: A� WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 Modules linked in: CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events_power_efficient crda_timeout_work RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline] RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline] RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 ... Call Trace: <TASK> crda_timeout_work+0x27/0x50 net/wireless/reg.c:542 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> 2025-04-25 CVE-2025-21910 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: slimbus: messaging: Free transaction ID in delayed interrupt scenario In case of interrupt delay for any reason, slim_do_transfer() returns timeout error but the transaction ID (TID) is not freed. This results into invalid memory access inside qcom_slim_ngd_rx_msgq_cb() due to invalid TID. Fix the issue by freeing the TID in slim_do_transfer() before returning timeout error to avoid invalid memory access. Call trace: __memcpy_fromio+0x20/0x190 qcom_slim_ngd_rx_msgq_cb+0x130/0x290 [slim_qcom_ngd_ctrl] vchan_complete+0x2a0/0x4a0 tasklet_action_common+0x274/0x700 tasklet_action+0x28/0x3c _stext+0x188/0x620 run_ksoftirqd+0x34/0x74 smpboot_thread_fn+0x1d8/0x464 kthread+0x178/0x238 ret_from_fork+0x10/0x20 Code: aa0003e8 91000429 f100044a 3940002b (3800150b) ---[ end trace 0fe00bec2b975c99 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt. 2025-04-25 CVE-2025-21914 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: HID: hid-steam: Fix use-after-free when detaching device When a hid-steam device is removed it must clean up the client_hdev used for intercepting hidraw access. This can lead to scheduling deferred work to reattach the input device. Though the cleanup cancels the deferred work, this was done before the client_hdev itself is cleaned up, so it gets rescheduled. This patch fixes the ordering to make sure the deferred work is properly canceled. 2025-04-25 CVE-2025-21923 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu() nvme_tcp_recv_pdu() doesn't check the validity of the header length. When header digests are enabled, a target might send a packet with an invalid header length (e.g. 255), causing nvme_tcp_verify_hdgst() to access memory outside the allocated area and cause memory corruptions by overwriting it with the calculated digest. Fix this by rejecting packets with an unexpected header length. 2025-04-25 CVE-2025-21927 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove() The system can experience a random crash a few minutes after the driver is removed. This issue occurs due to improper handling of memory freeing in the ishtp_hid_remove() function. The function currently frees the `driver_data` directly within the loop that destroys the HID devices, which can lead to accessing freed memory. Specifically, `hid_destroy_device()` uses `driver_data` when it calls `hid_ishtp_set_feature()` to power off the sensor, so freeing `driver_data` beforehand can result in accessing invalid memory. This patch resolves the issue by storing the `driver_data` in a temporary variable before calling `hid_destroy_device()`, and then freeing the `driver_data` after the device is destroyed. 2025-04-25 CVE-2025-21928 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: rapidio: add check for rio_add_net() in rio_scan_alloc_net() The return value of rio_add_net() should be checked. If it fails, put_device() should be called to free the memory and give up the reference initialized in rio_add_net(). 2025-04-25 CVE-2025-21935 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params Null pointer dereference issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not null before accessing. This prevents a null pointer dereference. Found by code review. (cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092) 2025-04-25 CVE-2025-21941 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: gpio: aggregator: protect driver attr handlers against module unload Both new_device_store and delete_device_store touch module global resources (e.g. gpio_aggregator_lock). To prevent race conditions with module unload, a reference needs to be held. Add try_module_get() in these handlers. For new_device_store, this eliminates what appears to be the most dangerous scenario: if an id is allocated from gpio_aggregator_idr but platform_device_register has not yet been called or completed, a concurrent module unload could fail to unregister/delete the device, leaving behind a dangling platform device/GPIO forwarder. This can result in various issues. The following simple reproducer demonstrates these problems: #!/bin/bash while :; do # note: whether 'gpiochip0 0' exists or not does not matter. echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device done & while :; do modprobe gpio-aggregator modprobe -r gpio-aggregator done & wait Starting with the following warning, several kinds of warnings will appear and the system may become unstable: ------------[ cut here ]------------ list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100) WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120 [...] RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120 [...] Call Trace: <TASK> ? __list_del_entry_valid_or_report+0xa3/0x120 ? __warn.cold+0x93/0xf2 ? __list_del_entry_valid_or_report+0xa3/0x120 ? report_bug+0xe6/0x170 ? __irq_work_queue_local+0x39/0xe0 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? __list_del_entry_valid_or_report+0xa3/0x120 gpiod_remove_lookup_table+0x22/0x60 new_device_store+0x315/0x350 [gpio_aggregator] kernfs_fop_write_iter+0x137/0x1f0 vfs_write+0x262/0x430 ksys_write+0x60/0xd0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]--- 2025-04-25 CVE-2025-21943 openEuler-24.03-LTS Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds in parse_sec_desc() If osidoffset, gsidoffset and dacloffset could be greater than smb_ntsd struct size. If it is smaller, It could cause slab-out-of-bounds. And when validating sid, It need to check it included subauth array size. 2025-04-25 CVE-2025-21946 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: LoongArch: Set hugetlb mmap base address aligned with pmd size With ltp test case "testcases/bin/hugefork02", there is a dmesg error report message such as: kernel BUG at mm/hugetlb.c:5550! Oops - BUG[#1]: CPU: 0 UID: 0 PID: 1517 Comm: hugefork02 Not tainted 6.14.0-rc2+ #241 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000004eaf1c ra 9000000000485538 tp 900000010edbc000 sp 900000010edbf940 a0 900000010edbfb00 a1 9000000108d20280 a2 00007fffe9474000 a3 00007ffff3474000 a4 0000000000000000 a5 0000000000000003 a6 00000000003cadd3 a7 0000000000000000 t0 0000000001ffffff t1 0000000001474000 t2 900000010ecd7900 t3 00007fffe9474000 t4 00007fffe9474000 t5 0000000000000040 t6 900000010edbfb00 t7 0000000000000001 t8 0000000000000005 u0 90000000004849d0 s9 900000010edbfa00 s0 9000000108d20280 s1 00007fffe9474000 s2 0000000002000000 s3 9000000108d20280 s4 9000000002b38b10 s5 900000010edbfb00 s6 00007ffff3474000 s7 0000000000000406 s8 900000010edbfa08 ra: 9000000000485538 unmap_vmas+0x130/0x218 ERA: 90000000004eaf1c __unmap_hugepage_range+0x6f4/0x7d0 PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Process hugefork02 (pid: 1517, threadinfo=00000000a670eaf4, task=000000007a95fc64) Call Trace: [<90000000004eaf1c>] __unmap_hugepage_range+0x6f4/0x7d0 [<9000000000485534>] unmap_vmas+0x12c/0x218 [<9000000000494068>] exit_mmap+0xe0/0x308 [<900000000025fdc4>] mmput+0x74/0x180 [<900000000026a284>] do_exit+0x294/0x898 [<900000000026aa30>] do_group_exit+0x30/0x98 [<900000000027bed4>] get_signal+0x83c/0x868 [<90000000002457b4>] arch_do_signal_or_restart+0x54/0xfa0 [<90000000015795e8>] irqentry_exit_to_user_mode+0xb8/0x138 [<90000000002572d0>] tlb_do_page_fault_1+0x114/0x1b4 The problem is that base address allocated from hugetlbfs is not aligned with pmd size. Here add a checking for hugetlbfs and align base address with pmd size. After this patch the test case "testcases/bin/hugefork02" passes to run. This is similar to the commit 7f24cbc9c4d42db8a3c8484d1 ("mm/mmap: teach generic_get_unmapped_area{_topdown} to handle hugetlb mappings"). 2025-04-25 CVE-2025-21949 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acdirmax mount option User-provided mount parameter acdirmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. 2025-04-25 CVE-2025-21963 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acregmax mount option User-provided mount parameter acregmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. 2025-04-25 CVE-2025-21964 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: fbdev: hyperv_fb: Allow graceful removal of framebuffer When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to release the framebuffer forcefully. If this framebuffer is in use it produce the following WARN and hence this framebuffer is never released. [ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40 < snip > [ 44.111289] Call Trace: [ 44.111290] <TASK> [ 44.111291] ? show_regs+0x6c/0x80 [ 44.111295] ? __warn+0x8d/0x150 [ 44.111298] ? framebuffer_release+0x2c/0x40 [ 44.111300] ? report_bug+0x182/0x1b0 [ 44.111303] ? handle_bug+0x6e/0xb0 [ 44.111306] ? exc_invalid_op+0x18/0x80 [ 44.111308] ? asm_exc_invalid_op+0x1b/0x20 [ 44.111311] ? framebuffer_release+0x2c/0x40 [ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb] [ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus] [ 44.111323] device_remove+0x40/0x80 [ 44.111325] device_release_driver_internal+0x20b/0x270 [ 44.111327] ? bus_find_device+0xb3/0xf0 Fix this by moving the release of framebuffer and assosiated memory to fb_ops.fb_destroy function, so that framebuffer framework handles it gracefully. While we fix this, also replace manual registrations/unregistration of framebuffer with devm_register_framebuffer. 2025-04-25 CVE-2025-21976 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: Fix address space leak when Hyper-V DRM device is removed When a Hyper-V DRM device is probed, the driver allocates MMIO space for the vram, and maps it cacheable. If the device removed, or in the error path for device probing, the MMIO space is released but no unmap is done. Consequently the kernel address space for the mapping is leaked. Fix this by adding iounmap() calls in the device removal path, and in the error path during device probing. 2025-04-25 CVE-2025-21978 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() When performing an iSCSI boot using IPv6, iscsistart still reads the /sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix length is 64, this causes the shift exponent to become negative, triggering a UBSAN warning. As the concept of a subnet mask does not apply to IPv6, the value is set to ~0 to suppress the warning message. 2025-04-25 CVE-2025-21993 openEuler-24.03-LTS High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix incorrect validation for num_aces field of smb_acl parse_dcal() validate num_aces to allocate posix_ace_state_array. if (num_aces > ULONG_MAX / sizeof(struct smb_ace *)) It is an incorrect validation that we can create an array of size ULONG_MAX. smb_acl has ->size field to calculate actual number of aces in request buffer size. Use this to check invalid num_aces. 2025-04-25 CVE-2025-21994 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: proc: fix UAF in proc_get_inode() Fix race between rmmod and /proc/XXX's inode instantiation. The bug is that pde->proc_ops don't belong to /proc, it belongs to a module, therefore dereferencing it after /proc entry has been registered is a bug unless use_pde/unuse_pde() pair has been used. use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops never changes so information necessary for inode instantiation can be saved _before_ proc_register() in PDE itself and used later, avoiding pde->proc_ops->... dereference. rmmod lookup sys_delete_module proc_lookup_de pde_get(de); proc_get_inode(dir->i_sb, de); mod->exit() proc_remove remove_proc_subtree proc_entry_rundown(de); free_module(mod); if (S_ISREG(inode->i_mode)) if (de->proc_ops->proc_read_iter) --> As module is already freed, will trigger UAF BUG: unable to handle page fault for address: fffffbfff80a702b PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:proc_get_inode+0x302/0x6e0 RSP: 0018:ffff88811c837998 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007 RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158 RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20 R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0 R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001 FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_lookup_de+0x11f/0x2e0 __lookup_slow+0x188/0x350 walk_component+0x2ab/0x4f0 path_lookupat+0x120/0x660 filename_lookup+0x1ce/0x560 vfs_statx+0xac/0x150 __do_sys_newstat+0x96/0x110 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e [adobriyan@gmail.com: don't do 2 atomic ops on the common path] 2025-04-25 CVE-2025-21999 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: regulator: check that dummy regulator has been probed before using it Due to asynchronous driver probing there is a chance that the dummy regulator hasn't already been probed when first accessing it. 2025-04-25 CVE-2025-22008 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state There are several problems with the way hyp code lazily saves the host's FPSIMD/SVE state, including: * Host SVE being discarded unexpectedly due to inconsistent configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to result in QEMU crashes where SVE is used by memmove(), as reported by Eric Auger: https://issues.redhat.com/browse/RHEL-68997 * Host SVE state is discarded *after* modification by ptrace, which was an unintentional ptrace ABI change introduced with lazy discarding of SVE state. * The host FPMR value can be discarded when running a non-protected VM, where FPMR support is not exposed to a VM, and that VM uses FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR before unbinding the host's FPSIMD/SVE/SME state, leaving a stale value in memory. Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME state when loading a vCPU such that KVM does not need to save any of the host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is removed and the necessary call to fpsimd_save_and_flush_cpu_state() is placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr' should not be used, they are set to NULL; all uses of these will be removed in subsequent patches. Historical problems go back at least as far as v5.17, e.g. erroneous assumptions about TIF_SVE being clear in commit: 8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving") ... and so this eager save+flush probably needs to be backported to ALL stable trees. 2025-04-25 CVE-2025-22013 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free in print_graph_function_flags during tracer switching Kairui reported a UAF issue in print_graph_function_flags() during ftrace stress testing [1]. This issue can be reproduced if puting a 'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(), and executing the following script: $ echo function_graph > current_tracer $ cat trace > /dev/null & $ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point $ echo timerlat > current_tracer The root cause lies in the two calls to print_graph_function_flags within print_trace_line during each s_show(): * One through 'iter->trace->print_line()'; * Another through 'event->funcs->trace()', which is hidden in print_trace_fmt() before print_trace_line returns. Tracer switching only updates the former, while the latter continues to use the print_line function of the old tracer, which in the script above is print_graph_function_flags. Moreover, when switching from the 'function_graph' tracer to the 'timerlat' tracer, s_start only calls graph_trace_close of the 'function_graph' tracer to free 'iter->private', but does not set it to NULL. This provides an opportunity for 'event->funcs->trace()' to use an invalid 'iter->private'. To fix this issue, set 'iter->private' to NULL immediately after freeing it in graph_trace_close(), ensuring that an invalid pointer is not passed to other tracers. Additionally, clean up the unnecessary 'iter->private = NULL' during each 'cat trace' when using wakeup and irqsoff tracers. [1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/ 2025-04-25 CVE-2025-22035 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate zero num_subauth before sub_auth is accessed Access psid->sub_auth[psid->num_subauth - 1] without checking if num_subauth is non-zero leads to an out-of-bounds read. This patch adds a validation step to ensure num_subauth != 0 before sub_auth is accessed. 2025-04-25 CVE-2025-22038 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: LoongArch: Increase ARCH_DMA_MINALIGN up to 16 ARCH_DMA_MINALIGN is 1 by default, but some LoongArch-specific devices (such as APBDMA) require 16 bytes alignment. When the data buffer length is too small, the hardware may make an error writing cacheline. Thus, it is dangerous to allocate a small memory buffer for DMA. It's always safe to define ARCH_DMA_MINALIGN as L1_CACHE_BYTES but unnecessary (kmalloc() need small memory objects). Therefore, just increase it to 16. 2025-04-25 CVE-2025-22049 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-card: Add NULL check in imx_card_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, imx_card_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. 2025-04-25 CVE-2025-22066 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: ext4: goto right label 'out_mmap_sem' in ext4_setattr() Otherwise, if ext4_inode_attach_jinode() fails, a hung task will happen because filemap_invalidate_unlock() isn't called to unlock mapping->invalidate_lock. Like this: EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory INFO: task fsstress:374 blocked for more than 122 seconds. Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373 task_flags:0x440140 flags:0x00000000 Call Trace: <TASK> __schedule+0x2c9/0x7f0 schedule+0x27/0xa0 schedule_preempt_disabled+0x15/0x30 rwsem_down_read_slowpath+0x278/0x4c0 down_read+0x59/0xb0 page_cache_ra_unbounded+0x65/0x1b0 filemap_get_pages+0x124/0x3e0 filemap_read+0x114/0x3d0 vfs_read+0x297/0x360 ksys_read+0x6c/0xe0 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e 2025-04-25 CVE-2025-22120 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: Add NULL check for adev Not all devices have an ACPI companion fwnode, so adev might be NULL. This is similar to the commit cd2fd6eab480 ("platform/x86: int3472: Check for adev == NULL"). Add a check for adev not being set and return -ENODEV in that case to avoid a possible NULL pointer deref in int3402_thermal_probe(). Note, under the same directory, int3400_thermal_probe() has such a check. [ rjw: Subject edit, added Fixes: ] 2025-04-25 CVE-2025-23136 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450 In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: dp: drm_err => dev_err in HPD path to avoid NULL ptr The function mtk_dp_wait_hpd_asserted() may be called before the `mtk_dp->drm_dev` pointer is assigned in mtk_dp_bridge_attach(). Specifically it can be called via this callpath: - mtk_edp_wait_hpd_asserted - [panel probe] - dp_aux_ep_probe Using "drm" level prints anywhere in this callpath causes a NULL pointer dereference. Change the error message directly in mtk_dp_wait_hpd_asserted() to dev_err() to avoid this. Also change the error messages in mtk_dp_parse_capabilities(), which is called by mtk_dp_wait_hpd_asserted(). While touching these prints, also add the error code to them to make future debugging easier. 2025-04-25 CVE-2025-38240 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-04-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1450