An update for kernel is now available for openEuler-24.03-LTS-SP2 Security Advisory openeuler-security@openeuler.org openEuler security committee openEuler-SA-2025-1880 Final 1.0 1.0 2025-07-25 Initial 2025-07-25 2025-07-25 openEuler SA Tool V1.0 2025-07-25 kernel security update An update for kernel is now available for openEuler-24.03-LTS-SP2 The Linux Kernel, the operating system core itself. Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: bpf: consider that tail calls invalidate packet pointers Tail-called programs could execute any of the helpers that invalidate packet pointers. Hence, conservatively assume that each tail call invalidates packet pointers. Making the change in bpf_helper_changes_pkt_data() automatically makes use of check_cfg() logic that computes 'changes_pkt_data' effect for global sub-programs, such that the following program could be rejected: int tail_call(struct __sk_buff *sk) { bpf_tail_call_static(sk, &jmp_table, 0); return 0; } SEC("tc") int not_safe(struct __sk_buff *sk) { int *p = (void *)(long)sk->data; ... make p valid ... tail_call(sk); *p = 42; /* this is unsafe */ ... } The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that can invalidate packet pointers. Otherwise, it can't be freplaced with tailcall_freplace.c:entry_freplace() that does a tail call.(CVE-2024-58237) In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: do not update checksum in bnxt_xdp_build_skb() The bnxt_rx_pkt() updates ip_summed value at the end if checksum offload is enabled. When the XDP-MB program is attached and it returns XDP_PASS, the bnxt_xdp_build_skb() is called to update skb_shared_info. The main purpose of bnxt_xdp_build_skb() is to update skb_shared_info, but it updates ip_summed value too if checksum offload is enabled. This is actually duplicate work. When the bnxt_rx_pkt() updates ip_summed value, it checks if ip_summed is CHECKSUM_NONE or not. It means that ip_summed should be CHECKSUM_NONE at this moment. But ip_summed may already be updated to CHECKSUM_UNNECESSARY in the XDP-MB-PASS path. So the by skb_checksum_none_assert() WARNS about it. This is duplicate work and updating ip_summed in the bnxt_xdp_build_skb() is not needed. Splat looks like: WARNING: CPU: 3 PID: 5782 at ./include/linux/skbuff.h:5155 bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Modules linked in: bnxt_re bnxt_en rdma_ucm rdma_cm iw_cm ib_cm ib_uverbs veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_] CPU: 3 UID: 0 PID: 5782 Comm: socat Tainted: G W 6.14.0-rc4+ #27 Tainted: [W]=WARN Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Code: 54 24 0c 4c 89 f1 4c 89 ff c1 ea 1f ff d3 0f 1f 00 49 89 c6 48 85 c0 0f 84 4c e5 ff ff 48 89 c7 e8 ca 3d a0 c8 e9 8f f4 ff ff <0f> 0b f RSP: 0018:ffff88881ba09928 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000c7590303 RCX: 0000000000000000 RDX: 1ffff1104e7d1610 RSI: 0000000000000001 RDI: ffff8881c91300b8 RBP: ffff88881ba09b28 R08: ffff888273e8b0d0 R09: ffff888273e8b070 R10: ffff888273e8b010 R11: ffff888278b0f000 R12: ffff888273e8b080 R13: ffff8881c9130e00 R14: ffff8881505d3800 R15: ffff888273e8b000 FS: 00007f5a2e7be080(0000) GS:ffff88881ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff2e708ff8 CR3: 000000013e3b0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0xcd/0x2f0 ? bnxt_rx_pkt+0x479b/0x7610 ? report_bug+0x326/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x14/0x50 ? asm_exc_invalid_op+0x16/0x20 ? bnxt_rx_pkt+0x479b/0x7610 ? bnxt_rx_pkt+0x3e41/0x7610 ? __pfx_bnxt_rx_pkt+0x10/0x10 ? napi_complete_done+0x2cf/0x7d0 __bnxt_poll_work+0x4e8/0x1220 ? __pfx___bnxt_poll_work+0x10/0x10 ? __pfx_mark_lock.part.0+0x10/0x10 bnxt_poll_p5+0x36a/0xfa0 ? __pfx_bnxt_poll_p5+0x10/0x10 __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x899/0xd00 ... Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue.(CVE-2025-21960) In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix truesize for mb-xdp-pass case When mb-xdp is set and return is XDP_PASS, packet is converted from xdp_buff to sk_buff with xdp_update_skb_shared_info() in bnxt_xdp_build_skb(). bnxt_xdp_build_skb() passes incorrect truesize argument to xdp_update_skb_shared_info(). The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but the skb_shared_info was wiped by napi_build_skb() before. So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it instead of getting skb_shared_info from xdp_get_shared_info_from_buff(). Splat looks like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3 RIP: 0010:skb_try_coalesce+0x504/0x590 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0x84/0x130 ? skb_try_coalesce+0x504/0x590 ? report_bug+0x18a/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? skb_try_coalesce+0x504/0x590 inet_frag_reasm_finish+0x11f/0x2e0 ip_defrag+0x37a/0x900 ip_local_deliver+0x51/0x120 ip_sublist_rcv_finish+0x64/0x70 ip_sublist_rcv+0x179/0x210 ip_list_rcv+0xf9/0x130 How to reproduce: <Node A> ip link set $interface1 xdp obj xdp_pass.o ip link set $interface1 mtu 9000 up ip a a 10.0.0.1/24 dev $interface1 <Node B> ip link set $interfac2 mtu 9000 up ip a a 10.0.0.2/24 dev $interface2 ping 10.0.0.1 -s 65000 Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue.(CVE-2025-21961) In the Linux kernel, the following vulnerability has been resolved: net/mlx5: handle errors in mlx5_chains_create_table() In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns() and mlx5_get_flow_namespace() must be checked to prevent NULL pointer dereferences. If either function fails, the function should log error message with mlx5_core_warn() and return error pointer.(CVE-2025-21975) In the Linux kernel, the following vulnerability has been resolved: xsk: fix an integer overflow in xp_create_and_assign_umem() Since the i and pool->chunk_size variables are of type 'u32', their product can wrap around and then be cast to 'u64'. This can lead to two different XDP buffers pointing to the same memory area. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2025-21997) In the Linux kernel, the following vulnerability has been resolved: net: atm: fix use after free in lec_send() The ->send() operation frees skb so save the length before calling ->send() to avoid a use after free.(CVE-2025-22004) In the Linux kernel, the following vulnerability has been resolved: usbnet:fix NPE during rx_complete Missing usbnet_going_away Check in Critical Path. The usb_submit_urb function lacks a usbnet_going_away validation, whereas __usbnet_queue_skb includes this check. This inconsistency creates a race condition where: A URB request may succeed, but the corresponding SKB data fails to be queued. Subsequent processes: (e.g., rx_complete → defer_bh → __skb_unlink(skb, list)) attempt to access skb->next, triggering a NULL pointer dereference (Kernel Panic).(CVE-2025-22050) In the Linux kernel, the following vulnerability has been resolved: net: ibmveth: make veth_pool_store stop hanging v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243. ---truncated---(CVE-2025-22053) In the Linux kernel, the following vulnerability has been resolved: arcnet: Add NULL check in com20020pci_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, com20020pci_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensure no resources are left allocated.(CVE-2025-22054) In the Linux kernel, the following vulnerability has been resolved: net: fix geneve_opt length integer overflow struct geneve_opt uses 5 bit length for each single option, which means every vary size option should be smaller than 128 bytes. However, all current related Netlink policies cannot promise this length condition and the attacker can exploit a exact 128-byte size option to *fake* a zero length option and confuse the parsing logic, further achieve heap out-of-bounds read. One example crash log is like below: [ 3.905425] ================================================================== [ 3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0 [ 3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177 [ 3.906646] [ 3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1 [ 3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 3.907784] Call Trace: [ 3.907925] <TASK> [ 3.908048] dump_stack_lvl+0x44/0x5c [ 3.908258] print_report+0x184/0x4be [ 3.909151] kasan_report+0xc5/0x100 [ 3.909539] kasan_check_range+0xf3/0x1a0 [ 3.909794] memcpy+0x1f/0x60 [ 3.909968] nla_put+0xa9/0xe0 [ 3.910147] tunnel_key_dump+0x945/0xba0 [ 3.911536] tcf_action_dump_1+0x1c1/0x340 [ 3.912436] tcf_action_dump+0x101/0x180 [ 3.912689] tcf_exts_dump+0x164/0x1e0 [ 3.912905] fw_dump+0x18b/0x2d0 [ 3.913483] tcf_fill_node+0x2ee/0x460 [ 3.914778] tfilter_notify+0xf4/0x180 [ 3.915208] tc_new_tfilter+0xd51/0x10d0 [ 3.918615] rtnetlink_rcv_msg+0x4a2/0x560 [ 3.919118] netlink_rcv_skb+0xcd/0x200 [ 3.919787] netlink_unicast+0x395/0x530 [ 3.921032] netlink_sendmsg+0x3d0/0x6d0 [ 3.921987] __sock_sendmsg+0x99/0xa0 [ 3.922220] __sys_sendto+0x1b7/0x240 [ 3.922682] __x64_sys_sendto+0x72/0x90 [ 3.922906] do_syscall_64+0x5e/0x90 [ 3.923814] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 3.924122] RIP: 0033:0x7e83eab84407 [ 3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf [ 3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407 [ 3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003 [ 3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c [ 3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0 [ 3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8 Fix these issues by enforing correct length condition in related policies.(CVE-2025-22055) In the Linux kernel, the following vulnerability has been resolved: udp: Fix memory accounting leak. Matt Dowling reported a weird UDP memory usage issue. Under normal operation, the UDP memory usage reported in /proc/net/sockstat remains close to zero. However, it occasionally spiked to 524,288 pages and never dropped. Moreover, the value doubled when the application was terminated. Finally, it caused intermittent packet drops. We can reproduce the issue with the script below [0]: 1. /proc/net/sockstat reports 0 pages # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 0 2. Run the script till the report reaches 524,288 # python3 test.py & sleep 5 # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> PAGE_SHIFT 3. Kill the socket and confirm the number never drops # pkill python3 && sleep 5 # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 524288 4. (necessary since v6.0) Trigger proto_memory_pcpu_drain() # python3 test.py & sleep 1 && pkill python3 5. The number doubles # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 1048577 The application set INT_MAX to SO_RCVBUF, which triggered an integer overflow in udp_rmem_release(). When a socket is close()d, udp_destruct_common() purges its receive queue and sums up skb->truesize in the queue. This total is calculated and stored in a local unsigned integer variable. The total size is then passed to udp_rmem_release() to adjust memory accounting. However, because the function takes a signed integer argument, the total size can wrap around, causing an overflow. Then, the released amount is calculated as follows: 1) Add size to sk->sk_forward_alloc. 2) Round down sk->sk_forward_alloc to the nearest lower multiple of PAGE_SIZE and assign it to amount. 3) Subtract amount from sk->sk_forward_alloc. 4) Pass amount >> PAGE_SHIFT to __sk_mem_reduce_allocated(). When the issue occurred, the total in udp_destruct_common() was 2147484480 (INT_MAX + 833), which was cast to -2147482816 in udp_rmem_release(). At 1) sk->sk_forward_alloc is changed from 3264 to -2147479552, and 2) sets -2147479552 to amount. 3) reverts the wraparound, so we don't see a warning in inet_sock_destruct(). However, udp_memory_allocated ends up doubling at 4). Since commit 3cd3399dd7a8 ("net: implement per-cpu reserves for memory_allocated"), memory usage no longer doubles immediately after a socket is close()d because __sk_mem_reduce_allocated() caches the amount in udp_memory_per_cpu_fw_alloc. However, the next time a UDP socket receives a packet, the subtraction takes effect, causing UDP memory usage to double. This issue makes further memory allocation fail once the socket's sk->sk_rmem_alloc exceeds net.ipv4.udp_rmem_min, resulting in packet drops. To prevent this issue, let's use unsigned int for the calculation and call sk_forward_alloc_add() only once for the small delta. Note that first_packet_length() also potentially has the same problem. [0]: from socket import * SO_RCVBUFFORCE = 33 INT_MAX = (2 ** 31) - 1 s = socket(AF_INET, SOCK_DGRAM) s.bind(('', 0)) s.setsockopt(SOL_SOCKET, SO_RCVBUFFORCE, INT_MAX) c = socket(AF_INET, SOCK_DGRAM) c.connect(s.getsockname()) data = b'a' * 100 while True: c.send(data)(CVE-2025-22058) In the Linux kernel, the following vulnerability has been resolved: sctp: add mutual exclusion in proc_sctp_do_udp_port() We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start() or risk a crash as syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653 Call Trace: <TASK> udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181 sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930 proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553 proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601 iter_file_splice_write+0x91c/0x1150 fs/splice.c:738 do_splice_from fs/splice.c:935 [inline] direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158 splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102 do_splice_direct_actor fs/splice.c:1201 [inline] do_splice_direct+0x174/0x240 fs/splice.c:1227 do_sendfile+0xafd/0xe50 fs/read_write.c:1368 __do_sys_sendfile64 fs/read_write.c:1429 [inline] __se_sys_sendfile64 fs/read_write.c:1415 [inline] __x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline](CVE-2025-22062) In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan.(CVE-2025-22103) In the Linux kernel, the following vulnerability has been resolved: net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF. SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl `- sock_do_ioctl `- br_ioctl_call `- dev_ioctl `- br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call `---> |- rtnl_lock Race | | `- br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | `- br_dev_delete(dev, ...) | | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...) | | | | `- rtnl_unlock \ | |- rtnl_lock <-' `- netdev_run_todo | |- ... `- netdev_run_todo | `- rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f(CVE-2025-22111) In the Linux kernel, the following vulnerability has been resolved: sctp: detect and prevent references to a freed transport in sendmsg sctp_sendmsg() re-uses associations and transports when possible by doing a lookup based on the socket endpoint and the message destination address, and then sctp_sendmsg_to_asoc() sets the selected transport in all the message chunks to be sent. There's a possible race condition if another thread triggers the removal of that selected transport, for instance, by explicitly unbinding an address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have been set up and before the message is sent. This can happen if the send buffer is full, during the period when the sender thread temporarily releases the socket lock in sctp_wait_for_sndbuf(). This causes the access to the transport data in sctp_outq_select_transport(), when the association outqueue is flushed, to result in a use-after-free read. This change avoids this scenario by having sctp_transport_free() signal the freeing of the transport, tagging it as "dead". In order to do this, the patch restores the "dead" bit in struct sctp_transport, which was removed in commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport"). Then, in the scenario where the sender thread has released the socket lock in sctp_wait_for_sndbuf(), the bit is checked again after re-acquiring the socket lock to detect the deletion. This is done while holding a reference to the transport to prevent it from being freed in the process. If the transport was deleted while the socket lock was relinquished, sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the send. The bug was found by a private syzbot instance (see the error report [1] and the C reproducer that triggers it [2]).(CVE-2025-23142) In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix accessing freed irq affinity_hint The cpumask should not be a local variable, since its pointer is saved to irq_desc and may be accessed from procfs. To fix it, use the persistent mask cpumask_of(cpu#).(CVE-2025-23155) In the Linux kernel, the following vulnerability has been resolved: tipc: fix memory leak in tipc_link_xmit In case the backlog transmit queue for system-importance messages is overloaded, tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to memory leak and failure when a skb is allocated. This commit fixes this issue by purging the skb list before tipc_link_xmit() returns.(CVE-2025-37757) In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory.(CVE-2025-37786) In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered Russell King reports that a system with mv88e6xxx dereferences a NULL pointer when unbinding this driver: https://lore.kernel.org/netdev/(CVE-2025-37787) In the Linux kernel, the following vulnerability has been resolved: cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error path In the for loop used to allocate the loc_array and bmap for each port, a memory leak is possible when the allocation for loc_array succeeds, but the allocation for bmap fails. This is because when the control flow goes to the label free_eth_finfo, only the allocations starting from (i-1)th iteration are freed. Fix that by freeing the loc_array in the bmap allocation error path.(CVE-2025-37788) In the Linux kernel, the following vulnerability has been resolved: net: mctp: Set SOCK_RCU_FREE Bind lookup runs under RCU, so ensure that a socket doesn't go away in the middle of a lookup.(CVE-2025-37790) In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class handling This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class handling. The issue occurs due to a time-of-check/time-of-use condition in hfsc_change_class() when working with certain child qdiscs like netem or codel. The vulnerability works as follows: 1. hfsc_change_class() checks if a class has packets (q.qlen != 0) 2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g., codel, netem) might drop packets and empty the queue 3. The code continues assuming the queue is still non-empty, adding the class to vttree 4. This breaks HFSC scheduler assumptions that only non-empty classes are in vttree 5. Later, when the class is destroyed, this can lead to a Use-After-Free The fix adds a second queue length check after qdisc_peek_len() to verify the queue wasn't emptied.(CVE-2025-37797) In the Linux kernel, the following vulnerability has been resolved: mcb: fix a double free bug in chameleon_parse_gdd() In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev' would be released in mcb_device_register() via put_device(). Thus, goto 'err' label and free 'mdev' again causes a double free. Just return if mcb_device_register() fails.(CVE-2025-37817) In the Linux kernel, the following vulnerability has been resolved: xen-netfront: handle NULL returned by xdp_convert_buff_to_frame() The function xdp_convert_buff_to_frame() may return NULL if it fails to correctly convert the XDP buffer into an XDP frame due to memory constraints, internal errors, or invalid data. Failing to check for NULL may lead to a NULL pointer dereference if the result is used later in processing, potentially causing crashes, data corruption, or undefined behavior. On XDP redirect failure, the associated page must be released explicitly if it was previously retained via get_page(). Failing to do so may result in a memory leak, as the pages reference count is not decremented.(CVE-2025-37820) In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too Similarly to the previous patch, we need to safe guard hfsc_dequeue() too. But for this one, we don't have a reliable reproducer.(CVE-2025-37823) In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL pointer dereference in tipc_mon_reinit_self() syzbot reported: tipc: Node number set to 1055423674 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 3 UID: 0 PID: 6017 Comm: kworker/3:5 Not tainted 6.15.0-rc1-syzkaller-00246-g900241a5cc15 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events tipc_net_finalize_work RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tipc_net_finalize+0x10b/0x180 net/tipc/net.c:140 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> ... RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 There is a racing condition between workqueue created when enabling bearer and another thread created when disabling bearer right after that as follow: enabling_bearer | disabling_bearer --------------- | ---------------- tipc_disc_timeout() | { | bearer_disable() ... | { schedule_work(&tn->work); | tipc_mon_delete() ... | { } | ... | write_lock_bh(&mon->lock); | mon->self = NULL; | write_unlock_bh(&mon->lock); | ... | } tipc_net_finalize_work() | } { | ... | tipc_net_finalize() | { | ... | tipc_mon_reinit_self() | { | ... | write_lock_bh(&mon->lock); | mon->self->addr = tipc_own_addr(net); | write_unlock_bh(&mon->lock); | ... ---truncated---(CVE-2025-37824) In the Linux kernel, the following vulnerability has been resolved: net: dsa: clean up FDB, MDB, VLAN entries on unbind As explained in many places such as commit b117e1e8a86d ("net: dsa: delete dsa_legacy_fdb_add and dsa_legacy_fdb_del"), DSA is written given the assumption that higher layers have balanced additions/deletions. As such, it only makes sense to be extremely vocal when those assumptions are violated and the driver unbinds with entries still present. But Ido Schimmel points out a very simple situation where that is wrong: https://lore.kernel.org/netdev/ZDazSM5UsPPjQuKr@shredder/ (also briefly discussed by me in the aforementioned commit). Basically, while the bridge bypass operations are not something that DSA explicitly documents, and for the majority of DSA drivers this API simply causes them to go to promiscuous mode, that isn't the case for all drivers. Some have the necessary requirements for bridge bypass operations to do something useful - see dsa_switch_supports_uc_filtering(). Although in tools/testing/selftests/net/forwarding/local_termination.sh, we made an effort to popularize better mechanisms to manage address filters on DSA interfaces from user space - namely macvlan for unicast, and setsockopt(IP_ADD_MEMBERSHIP) - through mtools - for multicast, the fact is that 'bridge fdb add ... self static local' also exists as kernel UAPI, and might be useful to someone, even if only for a quick hack. It seems counter-productive to block that path by implementing shim .ndo_fdb_add and .ndo_fdb_del operations which just return -EOPNOTSUPP in order to prevent the ndo_dflt_fdb_add() and ndo_dflt_fdb_del() from running, although we could do that. Accepting that cleanup is necessary seems to be the only option. Especially since we appear to be coming back at this from a different angle as well. Russell King is noticing that the WARN_ON() triggers even for VLANs: https://lore.kernel.org/netdev/(CVE-2025-37864) In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported Russell King reports that on the ZII dev rev B, deleting a bridge VLAN from a user port fails with -ENOENT: https://lore.kernel.org/netdev/(CVE-2025-37865) In the Linux kernel, the following vulnerability has been resolved: net: pktgen: fix access outside of user given buffer in pktgen_thread_write() Honour the user given buffer size for the strn_len() calls (otherwise strn_len() will access memory outside of the user given buffer).(CVE-2025-38061) In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix timeout on deleted connection NOPIN response timer may expire on a deleted connection and crash with such logs: Did not receive response to NOPIN on CID: 0, failing connection for I_T Nexus (null),i,0x00023d000125,iqn.2017-01.com.iscsi.target,t,0x3d BUG: Kernel NULL pointer dereference on read at 0x00000000 NIP strlcpy+0x8/0xb0 LR iscsit_fill_cxn_timeout_err_stats+0x5c/0xc0 [iscsi_target_mod] Call Trace: iscsit_handle_nopin_response_timeout+0xfc/0x120 [iscsi_target_mod] call_timer_fn+0x58/0x1f0 run_timer_softirq+0x740/0x860 __do_softirq+0x16c/0x420 irq_exit+0x188/0x1c0 timer_interrupt+0x184/0x410 That is because nopin response timer may be re-started on nopin timer expiration. Stop nopin timer before stopping the nopin response timer to be sure that no one of them will be re-started.(CVE-2025-38075) In the Linux kernel, the following vulnerability has been resolved: crypto: algif_hash - fix double free in hash_accept If accept(2) is called on socket type algif_hash with MSG_MORE flag set and crypto_ahash_import fails, sk2 is freed. However, it is also freed in af_alg_release, leading to slab-use-after-free error.(CVE-2025-38079) A vulnerability was found in Linux Kernel (Operating System) and classified as problematic.The manipulation of the argument bNumDescriptors with an unknown input leads to a unknown weakness. Using CWE to declare the problem leads to CWE-125. The product reads data past the end, or before the beginning, of the intended buffer.Impacted is confidentiality.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch 7a6d6b68db128da2078ccd9a751dfa3f75c9cf5b/41827a2dbdd7880df9881506dee13bc88d4230bb/1df80d748f984290c895e843401824215dcfbfb0/a8f842534807985d3a676006d140541b87044345/4fa7831cf0ac71a0a345369d1a6084f2b096e55e/74388368927e9c52a69524af5bbd6c55eb4690de/485e1b741eb838cbe1d6b0e81e5ab62ae6c095cf/fe7f7ac8e0c708446ff017453add769ffc15deed is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.(CVE-2025-38103) A vulnerability was found in Linux Kernel up to 6.16-rc1 (Operating System). It has been classified as critical.CWE is classifying the issue as CWE-404. The product does not release or incorrectly releases a resource before it is made available for re-use.This is going to have an impact on availability.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc2 eliminates this vulnerability. Applying the patch c337efb20d6d9f9bbb4746f6b119917af5c886dc/b44f791f27b14c9eb6b907fbe51f2ba8bec32085/5814a7fc3abb41f63f2d44c9d3ff9d4e62965b72/9c19498bdd7cb9d854bd3c54260f71cf7408495e/b4e9bab6011b9559b7c157b16b91ae46d4d8c533/d1bc80da75c789f2f6830df89d91fb2f7a509943/82448d4dcd8406dec688632a405fdcf7f170ec69/82ffbe7776d0ac084031f114167712269bf3d832 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.(CVE-2025-38115) A vulnerability, which was classified as critical, has been found in Linux Kernel up to 6.6.93/6.12.33/6.15.2/6.16-rc1 (Operating System).Using CWE to declare the problem leads to CWE-416. Referencing memory after it has been freed can cause a program to crash, use unexpected values, or execute code.Impacted is confidentiality, integrity, and availability.Upgrading to version 6.6.94, 6.12.34, 6.15.3 or 6.16-rc2 eliminates this vulnerability. Applying the patch bdd56875c6926d8009914f427df71797693e90d4/4e83f2dbb2bf677e614109df24426c4dded472d4/d7882db79135c829a922daf3571f33ea1e056ae3/6fe26f694c824b8a4dbf50c635bee1302e3f099c is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.(CVE-2025-38117) A vulnerability, which was classified as problematic, was found in Linux Kernel up to 8058c88ac0df21239daee54b5934d5c80ca9685f (Operating System).CWE is classifying the issue as CWE-401. The product does not sufficiently track and release allocated memory after it has been used, which slowly consumes remaining memory.This is going to have an impact on confidentiality.Upgrading to version 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch b5ad58285f9217d68cd5ea2ad86ce254a3fe7c4d/90bc7f5a244aadee4292b28098b7c98aadd4b3aa/39bab2d3517b5b50c609b4f8c66129bf619fffa0/251496ce1728c9fd47bd2b20a7b21b20b9a020ca/8068e1e42b46518ce680dc6470bcd710efc3fa0a/ea77c397bff8b6d59f6d83dae1425b08f465e8b5 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.(CVE-2025-38120) A vulnerability classified as problematic has been found in Linux Kernel (Operating System).This is going to have an impact on confidentiality, integrity, and availability.Upgrading to version 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch 0e65f38bd1aa14ea86e221b7bb814d38278d86c3/85eef1748c024da1a191aed56b30a3a65958c50c/4399f59a9467a324ed46657555f0e1f209a14acb/a04302867094bdc6efac1b598370fc47cf3f2388/3382a1ed7f778db841063f5d7e317ac55f9e7f72 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.(CVE-2025-38124) A vulnerability, which was classified as problematic, has been found in Linux Kernel up to 6.6.93/6.12.33/6.15.2 (Operating System).Using CWE to declare the problem leads to CWE-371.Impacted is confidentiality, integrity, and availability.Upgrading to version 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch 1d3c5d0dec6797eca3a861dab0816fa9505d9c3e/276849954d7cbe6eec827b21fe2df43f9bf07011/0e061abaad1498c5b76c10c594d4359ceb6b9145/0153f36041b8e52019ebfa8629c13bf8f9b0a951 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.(CVE-2025-38127) A vulnerability has been found in Linux Kernel up to 6.15.2 (Operating System) and classified as problematic.The CWE definition for the vulnerability is CWE-125. The product reads data past the end, or before the beginning, of the intended buffer.As an impact it is known to affect confidentiality, integrity, and availability.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch e5ce9df1d68094d37360dbd9b09289d42fa21e54/7ee3fb6258da8c890a51b514f60d7570dc703605/40471b23147c86ea3ed97faee79937c618250bd0/5482ef9875eaa43f0435e14570e1193823de857e/ee5ee646385f5846dcbc881389f3c44a197c402a/5a85c21f812e02cb00ca07007d88acdd42d08c46/ac4e317a95a1092b5da5b9918b7118759342641c is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.The vulnerability is also documented in the vulnerability database at EUVD (EUVD-2025-19787).(CVE-2025-38157) A vulnerability classified as problematic was found in Linux Kernel up to 6.15.3 (Operating System).As an impact it is known to affect confidentiality, integrity, and availability.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.95, 6.12.35, 6.15.4 or 6.16-rc1 eliminates this vulnerability. Applying the patch d9a55869d8237e677ddaa18b0f58586364cfbc1c/1f6332872374b7f482fc4ad865f9422fedb587fc/fbfe8446cd3274b9e367f5708d94574230a44409/5018d035530b6fbfad33eeb1dd1bc87da419a276/a87cbcc909ccfd394d4936a94663f586453d0961/aaa644e7ffff02e12c89cbce4753bc0b6f23ff87/d14cbed4baccd712447fb3f9c011f008b56b2097/42cb74a92adaf88061039601ddf7c874f58b554e is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.The vulnerability is also documented in the vulnerability database at EUVD (EUVD-2025-20037).(CVE-2025-38219) A vulnerability, which was classified as critical, has been found in Linux Kernel up to 6.6.94/6.12.34/6.15.3 (Operating System).Using CWE to declare the problem leads to CWE-476. A NULL pointer dereference occurs when the application dereferences a pointer that it expects to be valid, but is NULL, typically causing a crash or exit.Impacted is availability.Upgrading to version 6.6.95, 6.12.35, 6.15.4 or 6.16-rc1 eliminates this vulnerability. Applying the patch cf6a4c4ac7b6e3214f25df594c9689a62f1bb456/be5f3061a6f904e3674257879e71881ceee5b673/d7af6eee8cd60f55aa8c5fe2b91f11ec0c9a0f27/e26268ff1dcae5662c1b96c35f18cfa6ab73d9de is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.The vulnerability is also documented in the vulnerability database at EUVD (EUVD-2025-20036).(CVE-2025-38220) Linux kernel is the kernel used by Linux, the open source operating system of the Linux Foundation in the United States. There is a security vulnerability in Linux kernel. This vulnerability originates from improper processing of composing size in vivid drivers, which may lead to over-bounds writing.(CVE-2025-38226) A vulnerability, which was classified as problematic, was found in Linux Kernel up to 32700ecf8007e071d1ce4c78f65b85f46d05f32a (Operating System).The manipulation of the argument adxl_component_count with an unknown input leads to a unknown weakness. CWE is classifying the issue as CWE-125. The product reads data past the end, or before the beginning, of the intended buffer.This is going to have an impact on confidentiality.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch 80bf28fd623d97dd4f4825fbbe9d736cec2afba3/a6ed3a6edff09c1187cc6ade7f5967bca2376a13/bf6a8502a5f4ff6e4d135d795945cdade49ec8b0/e8530ed3c0769a4d8f79c212715ec1cf277787f8/3f5d0659000923735350da60ad710f8c804544fe/a13e8343ffcff27af1ff79597ff7ba241e6d9471/31ef6f7c9aee3be78d63789653e92350f2537f93/20d2d476b3ae18041be423671a8637ed5ffd6958 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.(CVE-2025-38298) A vulnerability classified as critical was found in Linux Kernel up to 6.15.3 (Operating System).The CWE definition for the vulnerability is CWE-476. A NULL pointer dereference occurs when the application dereferences a pointer that it expects to be valid, but is NULL, typically causing a crash or exit.As an impact it is known to affect availability.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.95, 6.12.35, 6.15.4 or 6.16-rc1 eliminates this vulnerability. Applying the patch 5c1a34ff5b0bfdfd2f9343aa9b08d25df618bac5/ec669e5bf409f16e464bfad75f0ba039a45de29a/43d5e3bb5f1dcd91e30238ea0b59a5f77063f84e/23361b479f2700c00960d3ae9cdc8ededa762d47/2e7c64d7a92c031d016f11c8e8cb05131ab7b75a/f78b38af3540b4875147b7b884ee11a27b3dbf4c/a377996d714afb8d4d5f4906336f78510039da29/af98b0157adf6504fade79b3e6cb260c4ff68e37 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.(CVE-2025-38337) An update for kernel is now available for openEuler-20.03-LTS-SP4/openEuler-22.03-LTS-SP3/openEuler-22.03-LTS-SP4/openEuler-24.03-LTS-SP2. openEuler Security has rated this update as having a security impact of high. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section. High kernel https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-58237 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21960 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21961 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21975 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-21997 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22004 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22050 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22053 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22054 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22055 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22058 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22062 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22103 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22111 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-23142 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-23155 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37757 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37786 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37787 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37788 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37790 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37797 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37817 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37820 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37823 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37824 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37864 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37865 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38061 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38075 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38079 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38103 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38115 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38117 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38120 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38124 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38127 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38157 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38219 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38220 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38226 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38298 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38337 https://nvd.nist.gov/vuln/detail/CVE-2024-58237 https://nvd.nist.gov/vuln/detail/CVE-2025-21960 https://nvd.nist.gov/vuln/detail/CVE-2025-21961 https://nvd.nist.gov/vuln/detail/CVE-2025-21975 https://nvd.nist.gov/vuln/detail/CVE-2025-21997 https://nvd.nist.gov/vuln/detail/CVE-2025-22004 https://nvd.nist.gov/vuln/detail/CVE-2025-22050 https://nvd.nist.gov/vuln/detail/CVE-2025-22053 https://nvd.nist.gov/vuln/detail/CVE-2025-22054 https://nvd.nist.gov/vuln/detail/CVE-2025-22055 https://nvd.nist.gov/vuln/detail/CVE-2025-22058 https://nvd.nist.gov/vuln/detail/CVE-2025-22062 https://nvd.nist.gov/vuln/detail/CVE-2025-22103 https://nvd.nist.gov/vuln/detail/CVE-2025-22111 https://nvd.nist.gov/vuln/detail/CVE-2025-23142 https://nvd.nist.gov/vuln/detail/CVE-2025-23155 https://nvd.nist.gov/vuln/detail/CVE-2025-37757 https://nvd.nist.gov/vuln/detail/CVE-2025-37786 https://nvd.nist.gov/vuln/detail/CVE-2025-37787 https://nvd.nist.gov/vuln/detail/CVE-2025-37788 https://nvd.nist.gov/vuln/detail/CVE-2025-37790 https://nvd.nist.gov/vuln/detail/CVE-2025-37797 https://nvd.nist.gov/vuln/detail/CVE-2025-37817 https://nvd.nist.gov/vuln/detail/CVE-2025-37820 https://nvd.nist.gov/vuln/detail/CVE-2025-37823 https://nvd.nist.gov/vuln/detail/CVE-2025-37824 https://nvd.nist.gov/vuln/detail/CVE-2025-37864 https://nvd.nist.gov/vuln/detail/CVE-2025-37865 https://nvd.nist.gov/vuln/detail/CVE-2025-38061 https://nvd.nist.gov/vuln/detail/CVE-2025-38075 https://nvd.nist.gov/vuln/detail/CVE-2025-38079 https://nvd.nist.gov/vuln/detail/CVE-2025-38103 https://nvd.nist.gov/vuln/detail/CVE-2025-38115 https://nvd.nist.gov/vuln/detail/CVE-2025-38117 https://nvd.nist.gov/vuln/detail/CVE-2025-38120 https://nvd.nist.gov/vuln/detail/CVE-2025-38124 https://nvd.nist.gov/vuln/detail/CVE-2025-38127 https://nvd.nist.gov/vuln/detail/CVE-2025-38157 https://nvd.nist.gov/vuln/detail/CVE-2025-38219 https://nvd.nist.gov/vuln/detail/CVE-2025-38220 https://nvd.nist.gov/vuln/detail/CVE-2025-38226 https://nvd.nist.gov/vuln/detail/CVE-2025-38298 https://nvd.nist.gov/vuln/detail/CVE-2025-38337 openEuler-24.03-LTS-SP2 bpftool-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm bpftool-debuginfo-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-debuginfo-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-debugsource-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-devel-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-extra-modules-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-headers-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-source-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-tools-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-tools-debuginfo-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm kernel-tools-devel-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm perf-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm perf-debuginfo-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm python3-perf-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm python3-perf-debuginfo-6.6.0-102.0.0.108.oe2403sp2.aarch64.rpm bpftool-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm bpftool-debuginfo-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-debuginfo-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-debugsource-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-devel-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-extra-modules-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-headers-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-source-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-tools-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-tools-debuginfo-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-tools-devel-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm perf-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm perf-debuginfo-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm python3-perf-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm python3-perf-debuginfo-6.6.0-102.0.0.108.oe2403sp2.x86_64.rpm kernel-6.6.0-102.0.0.108.oe2403sp2.src.rpm In the Linux kernel, the following vulnerability has been resolved: bpf: consider that tail calls invalidate packet pointers Tail-called programs could execute any of the helpers that invalidate packet pointers. Hence, conservatively assume that each tail call invalidates packet pointers. Making the change in bpf_helper_changes_pkt_data() automatically makes use of check_cfg() logic that computes 'changes_pkt_data' effect for global sub-programs, such that the following program could be rejected: int tail_call(struct __sk_buff *sk) { bpf_tail_call_static(sk, &jmp_table, 0); return 0; } SEC("tc") int not_safe(struct __sk_buff *sk) { int *p = (void *)(long)sk->data; ... make p valid ... tail_call(sk); *p = 42; /* this is unsafe */ ... } The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that can invalidate packet pointers. Otherwise, it can't be freplaced with tailcall_freplace.c:entry_freplace() that does a tail call. 2025-07-25 CVE-2024-58237 openEuler-24.03-LTS-SP2 Medium 6.0 AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: do not update checksum in bnxt_xdp_build_skb() The bnxt_rx_pkt() updates ip_summed value at the end if checksum offload is enabled. When the XDP-MB program is attached and it returns XDP_PASS, the bnxt_xdp_build_skb() is called to update skb_shared_info. The main purpose of bnxt_xdp_build_skb() is to update skb_shared_info, but it updates ip_summed value too if checksum offload is enabled. This is actually duplicate work. When the bnxt_rx_pkt() updates ip_summed value, it checks if ip_summed is CHECKSUM_NONE or not. It means that ip_summed should be CHECKSUM_NONE at this moment. But ip_summed may already be updated to CHECKSUM_UNNECESSARY in the XDP-MB-PASS path. So the by skb_checksum_none_assert() WARNS about it. This is duplicate work and updating ip_summed in the bnxt_xdp_build_skb() is not needed. Splat looks like: WARNING: CPU: 3 PID: 5782 at ./include/linux/skbuff.h:5155 bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Modules linked in: bnxt_re bnxt_en rdma_ucm rdma_cm iw_cm ib_cm ib_uverbs veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_] CPU: 3 UID: 0 PID: 5782 Comm: socat Tainted: G W 6.14.0-rc4+ #27 Tainted: [W]=WARN Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Code: 54 24 0c 4c 89 f1 4c 89 ff c1 ea 1f ff d3 0f 1f 00 49 89 c6 48 85 c0 0f 84 4c e5 ff ff 48 89 c7 e8 ca 3d a0 c8 e9 8f f4 ff ff <0f> 0b f RSP: 0018:ffff88881ba09928 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000c7590303 RCX: 0000000000000000 RDX: 1ffff1104e7d1610 RSI: 0000000000000001 RDI: ffff8881c91300b8 RBP: ffff88881ba09b28 R08: ffff888273e8b0d0 R09: ffff888273e8b070 R10: ffff888273e8b010 R11: ffff888278b0f000 R12: ffff888273e8b080 R13: ffff8881c9130e00 R14: ffff8881505d3800 R15: ffff888273e8b000 FS: 00007f5a2e7be080(0000) GS:ffff88881ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff2e708ff8 CR3: 000000013e3b0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0xcd/0x2f0 ? bnxt_rx_pkt+0x479b/0x7610 ? report_bug+0x326/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x14/0x50 ? asm_exc_invalid_op+0x16/0x20 ? bnxt_rx_pkt+0x479b/0x7610 ? bnxt_rx_pkt+0x3e41/0x7610 ? __pfx_bnxt_rx_pkt+0x10/0x10 ? napi_complete_done+0x2cf/0x7d0 __bnxt_poll_work+0x4e8/0x1220 ? __pfx___bnxt_poll_work+0x10/0x10 ? __pfx_mark_lock.part.0+0x10/0x10 bnxt_poll_p5+0x36a/0xfa0 ? __pfx_bnxt_poll_p5+0x10/0x10 __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x899/0xd00 ... Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. 2025-07-25 CVE-2025-21960 openEuler-24.03-LTS-SP2 Medium 4.6 AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix truesize for mb-xdp-pass case When mb-xdp is set and return is XDP_PASS, packet is converted from xdp_buff to sk_buff with xdp_update_skb_shared_info() in bnxt_xdp_build_skb(). bnxt_xdp_build_skb() passes incorrect truesize argument to xdp_update_skb_shared_info(). The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but the skb_shared_info was wiped by napi_build_skb() before. So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it instead of getting skb_shared_info from xdp_get_shared_info_from_buff(). Splat looks like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3 RIP: 0010:skb_try_coalesce+0x504/0x590 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0x84/0x130 ? skb_try_coalesce+0x504/0x590 ? report_bug+0x18a/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? skb_try_coalesce+0x504/0x590 inet_frag_reasm_finish+0x11f/0x2e0 ip_defrag+0x37a/0x900 ip_local_deliver+0x51/0x120 ip_sublist_rcv_finish+0x64/0x70 ip_sublist_rcv+0x179/0x210 ip_list_rcv+0xf9/0x130 How to reproduce: <Node A> ip link set $interface1 xdp obj xdp_pass.o ip link set $interface1 mtu 9000 up ip a a 10.0.0.1/24 dev $interface1 <Node B> ip link set $interfac2 mtu 9000 up ip a a 10.0.0.2/24 dev $interface2 ping 10.0.0.1 -s 65000 Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. 2025-07-25 CVE-2025-21961 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net/mlx5: handle errors in mlx5_chains_create_table() In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns() and mlx5_get_flow_namespace() must be checked to prevent NULL pointer dereferences. If either function fails, the function should log error message with mlx5_core_warn() and return error pointer. 2025-07-25 CVE-2025-21975 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: xsk: fix an integer overflow in xp_create_and_assign_umem() Since the i and pool->chunk_size variables are of type 'u32', their product can wrap around and then be cast to 'u64'. This can lead to two different XDP buffers pointing to the same memory area. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. 2025-07-25 CVE-2025-21997 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: atm: fix use after free in lec_send() The ->send() operation frees skb so save the length before calling ->send() to avoid a use after free. 2025-07-25 CVE-2025-22004 openEuler-24.03-LTS-SP2 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: usbnet:fix NPE during rx_complete Missing usbnet_going_away Check in Critical Path. The usb_submit_urb function lacks a usbnet_going_away validation, whereas __usbnet_queue_skb includes this check. This inconsistency creates a race condition where: A URB request may succeed, but the corresponding SKB data fails to be queued. Subsequent processes: (e.g., rx_complete → defer_bh → __skb_unlink(skb, list)) attempt to access skb->next, triggering a NULL pointer dereference (Kernel Panic). 2025-07-25 CVE-2025-22050 openEuler-24.03-LTS-SP2 Medium 4.6 AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: ibmveth: make veth_pool_store stop hanging v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243. ---truncated--- 2025-07-25 CVE-2025-22053 openEuler-24.03-LTS-SP2 Low 2.6 AV:A/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: arcnet: Add NULL check in com20020pci_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, com20020pci_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensure no resources are left allocated. 2025-07-25 CVE-2025-22054 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: fix geneve_opt length integer overflow struct geneve_opt uses 5 bit length for each single option, which means every vary size option should be smaller than 128 bytes. However, all current related Netlink policies cannot promise this length condition and the attacker can exploit a exact 128-byte size option to *fake* a zero length option and confuse the parsing logic, further achieve heap out-of-bounds read. One example crash log is like below: [ 3.905425] ================================================================== [ 3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0 [ 3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177 [ 3.906646] [ 3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1 [ 3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 3.907784] Call Trace: [ 3.907925] <TASK> [ 3.908048] dump_stack_lvl+0x44/0x5c [ 3.908258] print_report+0x184/0x4be [ 3.909151] kasan_report+0xc5/0x100 [ 3.909539] kasan_check_range+0xf3/0x1a0 [ 3.909794] memcpy+0x1f/0x60 [ 3.909968] nla_put+0xa9/0xe0 [ 3.910147] tunnel_key_dump+0x945/0xba0 [ 3.911536] tcf_action_dump_1+0x1c1/0x340 [ 3.912436] tcf_action_dump+0x101/0x180 [ 3.912689] tcf_exts_dump+0x164/0x1e0 [ 3.912905] fw_dump+0x18b/0x2d0 [ 3.913483] tcf_fill_node+0x2ee/0x460 [ 3.914778] tfilter_notify+0xf4/0x180 [ 3.915208] tc_new_tfilter+0xd51/0x10d0 [ 3.918615] rtnetlink_rcv_msg+0x4a2/0x560 [ 3.919118] netlink_rcv_skb+0xcd/0x200 [ 3.919787] netlink_unicast+0x395/0x530 [ 3.921032] netlink_sendmsg+0x3d0/0x6d0 [ 3.921987] __sock_sendmsg+0x99/0xa0 [ 3.922220] __sys_sendto+0x1b7/0x240 [ 3.922682] __x64_sys_sendto+0x72/0x90 [ 3.922906] do_syscall_64+0x5e/0x90 [ 3.923814] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 3.924122] RIP: 0033:0x7e83eab84407 [ 3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf [ 3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407 [ 3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003 [ 3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c [ 3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0 [ 3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8 Fix these issues by enforing correct length condition in related policies. 2025-07-25 CVE-2025-22055 openEuler-24.03-LTS-SP2 Low 2.6 AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:N kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: udp: Fix memory accounting leak. Matt Dowling reported a weird UDP memory usage issue. Under normal operation, the UDP memory usage reported in /proc/net/sockstat remains close to zero. However, it occasionally spiked to 524,288 pages and never dropped. Moreover, the value doubled when the application was terminated. Finally, it caused intermittent packet drops. We can reproduce the issue with the script below [0]: 1. /proc/net/sockstat reports 0 pages # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 0 2. Run the script till the report reaches 524,288 # python3 test.py & sleep 5 # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> PAGE_SHIFT 3. Kill the socket and confirm the number never drops # pkill python3 && sleep 5 # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 524288 4. (necessary since v6.0) Trigger proto_memory_pcpu_drain() # python3 test.py & sleep 1 && pkill python3 5. The number doubles # cat /proc/net/sockstat | grep UDP: UDP: inuse 1 mem 1048577 The application set INT_MAX to SO_RCVBUF, which triggered an integer overflow in udp_rmem_release(). When a socket is close()d, udp_destruct_common() purges its receive queue and sums up skb->truesize in the queue. This total is calculated and stored in a local unsigned integer variable. The total size is then passed to udp_rmem_release() to adjust memory accounting. However, because the function takes a signed integer argument, the total size can wrap around, causing an overflow. Then, the released amount is calculated as follows: 1) Add size to sk->sk_forward_alloc. 2) Round down sk->sk_forward_alloc to the nearest lower multiple of PAGE_SIZE and assign it to amount. 3) Subtract amount from sk->sk_forward_alloc. 4) Pass amount >> PAGE_SHIFT to __sk_mem_reduce_allocated(). When the issue occurred, the total in udp_destruct_common() was 2147484480 (INT_MAX + 833), which was cast to -2147482816 in udp_rmem_release(). At 1) sk->sk_forward_alloc is changed from 3264 to -2147479552, and 2) sets -2147479552 to amount. 3) reverts the wraparound, so we don't see a warning in inet_sock_destruct(). However, udp_memory_allocated ends up doubling at 4). Since commit 3cd3399dd7a8 ("net: implement per-cpu reserves for memory_allocated"), memory usage no longer doubles immediately after a socket is close()d because __sk_mem_reduce_allocated() caches the amount in udp_memory_per_cpu_fw_alloc. However, the next time a UDP socket receives a packet, the subtraction takes effect, causing UDP memory usage to double. This issue makes further memory allocation fail once the socket's sk->sk_rmem_alloc exceeds net.ipv4.udp_rmem_min, resulting in packet drops. To prevent this issue, let's use unsigned int for the calculation and call sk_forward_alloc_add() only once for the small delta. Note that first_packet_length() also potentially has the same problem. [0]: from socket import * SO_RCVBUFFORCE = 33 INT_MAX = (2 ** 31) - 1 s = socket(AF_INET, SOCK_DGRAM) s.bind(('', 0)) s.setsockopt(SOL_SOCKET, SO_RCVBUFFORCE, INT_MAX) c = socket(AF_INET, SOCK_DGRAM) c.connect(s.getsockname()) data = b'a' * 100 while True: c.send(data) 2025-07-25 CVE-2025-22058 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: sctp: add mutual exclusion in proc_sctp_do_udp_port() We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start() or risk a crash as syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653 Call Trace: <TASK> udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181 sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930 proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553 proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601 iter_file_splice_write+0x91c/0x1150 fs/splice.c:738 do_splice_from fs/splice.c:935 [inline] direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158 splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102 do_splice_direct_actor fs/splice.c:1201 [inline] do_splice_direct+0x174/0x240 fs/splice.c:1227 do_sendfile+0xafd/0xe50 fs/read_write.c:1368 __do_sys_sendfile64 fs/read_write.c:1429 [inline] __se_sys_sendfile64 fs/read_write.c:1415 [inline] __x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] 2025-07-25 CVE-2025-22062 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan. 2025-07-25 CVE-2025-22103 openEuler-24.03-LTS-SP2 Medium 4.1 AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF. SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl `- sock_do_ioctl `- br_ioctl_call `- dev_ioctl `- br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call `---> |- rtnl_lock Race | | `- br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | `- br_dev_delete(dev, ...) | | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...) | | | | `- rtnl_unlock \ | |- rtnl_lock <-' `- netdev_run_todo | |- ... `- netdev_run_todo | `- rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f 2025-07-25 CVE-2025-22111 openEuler-24.03-LTS-SP2 Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: sctp: detect and prevent references to a freed transport in sendmsg sctp_sendmsg() re-uses associations and transports when possible by doing a lookup based on the socket endpoint and the message destination address, and then sctp_sendmsg_to_asoc() sets the selected transport in all the message chunks to be sent. There's a possible race condition if another thread triggers the removal of that selected transport, for instance, by explicitly unbinding an address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have been set up and before the message is sent. This can happen if the send buffer is full, during the period when the sender thread temporarily releases the socket lock in sctp_wait_for_sndbuf(). This causes the access to the transport data in sctp_outq_select_transport(), when the association outqueue is flushed, to result in a use-after-free read. This change avoids this scenario by having sctp_transport_free() signal the freeing of the transport, tagging it as "dead". In order to do this, the patch restores the "dead" bit in struct sctp_transport, which was removed in commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport"). Then, in the scenario where the sender thread has released the socket lock in sctp_wait_for_sndbuf(), the bit is checked again after re-acquiring the socket lock to detect the deletion. This is done while holding a reference to the transport to prevent it from being freed in the process. If the transport was deleted while the socket lock was relinquished, sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the send. The bug was found by a private syzbot instance (see the error report [1] and the C reproducer that triggers it [2]). 2025-07-25 CVE-2025-23142 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix accessing freed irq affinity_hint The cpumask should not be a local variable, since its pointer is saved to irq_desc and may be accessed from procfs. To fix it, use the persistent mask cpumask_of(cpu#). 2025-07-25 CVE-2025-23155 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: tipc: fix memory leak in tipc_link_xmit In case the backlog transmit queue for system-importance messages is overloaded, tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to memory leak and failure when a skb is allocated. This commit fixes this issue by purging the skb list before tipc_link_xmit() returns. 2025-07-25 CVE-2025-37757 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory. 2025-07-25 CVE-2025-37786 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered Russell King reports that a system with mv88e6xxx dereferences a NULL pointer when unbinding this driver: https://lore.kernel.org/netdev/ 2025-07-25 CVE-2025-37787 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error path In the for loop used to allocate the loc_array and bmap for each port, a memory leak is possible when the allocation for loc_array succeeds, but the allocation for bmap fails. This is because when the control flow goes to the label free_eth_finfo, only the allocations starting from (i-1)th iteration are freed. Fix that by freeing the loc_array in the bmap allocation error path. 2025-07-25 CVE-2025-37788 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: mctp: Set SOCK_RCU_FREE Bind lookup runs under RCU, so ensure that a socket doesn't go away in the middle of a lookup. 2025-07-25 CVE-2025-37790 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class handling This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class handling. The issue occurs due to a time-of-check/time-of-use condition in hfsc_change_class() when working with certain child qdiscs like netem or codel. The vulnerability works as follows: 1. hfsc_change_class() checks if a class has packets (q.qlen != 0) 2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g., codel, netem) might drop packets and empty the queue 3. The code continues assuming the queue is still non-empty, adding the class to vttree 4. This breaks HFSC scheduler assumptions that only non-empty classes are in vttree 5. Later, when the class is destroyed, this can lead to a Use-After-Free The fix adds a second queue length check after qdisc_peek_len() to verify the queue wasn't emptied. 2025-07-25 CVE-2025-37797 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: mcb: fix a double free bug in chameleon_parse_gdd() In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev' would be released in mcb_device_register() via put_device(). Thus, goto 'err' label and free 'mdev' again causes a double free. Just return if mcb_device_register() fails. 2025-07-25 CVE-2025-37817 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: xen-netfront: handle NULL returned by xdp_convert_buff_to_frame() The function xdp_convert_buff_to_frame() may return NULL if it fails to correctly convert the XDP buffer into an XDP frame due to memory constraints, internal errors, or invalid data. Failing to check for NULL may lead to a NULL pointer dereference if the result is used later in processing, potentially causing crashes, data corruption, or undefined behavior. On XDP redirect failure, the associated page must be released explicitly if it was previously retained via get_page(). Failing to do so may result in a memory leak, as the pages reference count is not decremented. 2025-07-25 CVE-2025-37820 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too Similarly to the previous patch, we need to safe guard hfsc_dequeue() too. But for this one, we don't have a reliable reproducer. 2025-07-25 CVE-2025-37823 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL pointer dereference in tipc_mon_reinit_self() syzbot reported: tipc: Node number set to 1055423674 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 3 UID: 0 PID: 6017 Comm: kworker/3:5 Not tainted 6.15.0-rc1-syzkaller-00246-g900241a5cc15 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events tipc_net_finalize_work RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tipc_net_finalize+0x10b/0x180 net/tipc/net.c:140 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> ... RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 There is a racing condition between workqueue created when enabling bearer and another thread created when disabling bearer right after that as follow: enabling_bearer | disabling_bearer --------------- | ---------------- tipc_disc_timeout() | { | bearer_disable() ... | { schedule_work(&tn->work); | tipc_mon_delete() ... | { } | ... | write_lock_bh(&mon->lock); | mon->self = NULL; | write_unlock_bh(&mon->lock); | ... | } tipc_net_finalize_work() | } { | ... | tipc_net_finalize() | { | ... | tipc_mon_reinit_self() | { | ... | write_lock_bh(&mon->lock); | mon->self->addr = tipc_own_addr(net); | write_unlock_bh(&mon->lock); | ... ---truncated--- 2025-07-25 CVE-2025-37824 openEuler-24.03-LTS-SP2 Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: dsa: clean up FDB, MDB, VLAN entries on unbind As explained in many places such as commit b117e1e8a86d ("net: dsa: delete dsa_legacy_fdb_add and dsa_legacy_fdb_del"), DSA is written given the assumption that higher layers have balanced additions/deletions. As such, it only makes sense to be extremely vocal when those assumptions are violated and the driver unbinds with entries still present. But Ido Schimmel points out a very simple situation where that is wrong: https://lore.kernel.org/netdev/ZDazSM5UsPPjQuKr@shredder/ (also briefly discussed by me in the aforementioned commit). Basically, while the bridge bypass operations are not something that DSA explicitly documents, and for the majority of DSA drivers this API simply causes them to go to promiscuous mode, that isn't the case for all drivers. Some have the necessary requirements for bridge bypass operations to do something useful - see dsa_switch_supports_uc_filtering(). Although in tools/testing/selftests/net/forwarding/local_termination.sh, we made an effort to popularize better mechanisms to manage address filters on DSA interfaces from user space - namely macvlan for unicast, and setsockopt(IP_ADD_MEMBERSHIP) - through mtools - for multicast, the fact is that 'bridge fdb add ... self static local' also exists as kernel UAPI, and might be useful to someone, even if only for a quick hack. It seems counter-productive to block that path by implementing shim .ndo_fdb_add and .ndo_fdb_del operations which just return -EOPNOTSUPP in order to prevent the ndo_dflt_fdb_add() and ndo_dflt_fdb_del() from running, although we could do that. Accepting that cleanup is necessary seems to be the only option. Especially since we appear to be coming back at this from a different angle as well. Russell King is noticing that the WARN_ON() triggers even for VLANs: https://lore.kernel.org/netdev/ 2025-07-25 CVE-2025-37864 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported Russell King reports that on the ZII dev rev B, deleting a bridge VLAN from a user port fails with -ENOENT: https://lore.kernel.org/netdev/ 2025-07-25 CVE-2025-37865 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: net: pktgen: fix access outside of user given buffer in pktgen_thread_write() Honour the user given buffer size for the strn_len() calls (otherwise strn_len() will access memory outside of the user given buffer). 2025-07-25 CVE-2025-38061 openEuler-24.03-LTS-SP2 High 8.0 AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix timeout on deleted connection NOPIN response timer may expire on a deleted connection and crash with such logs: Did not receive response to NOPIN on CID: 0, failing connection for I_T Nexus (null),i,0x00023d000125,iqn.2017-01.com.iscsi.target,t,0x3d BUG: Kernel NULL pointer dereference on read at 0x00000000 NIP strlcpy+0x8/0xb0 LR iscsit_fill_cxn_timeout_err_stats+0x5c/0xc0 [iscsi_target_mod] Call Trace: iscsit_handle_nopin_response_timeout+0xfc/0x120 [iscsi_target_mod] call_timer_fn+0x58/0x1f0 run_timer_softirq+0x740/0x860 __do_softirq+0x16c/0x420 irq_exit+0x188/0x1c0 timer_interrupt+0x184/0x410 That is because nopin response timer may be re-started on nopin timer expiration. Stop nopin timer before stopping the nopin response timer to be sure that no one of them will be re-started. 2025-07-25 CVE-2025-38075 openEuler-24.03-LTS-SP2 Medium 4.8 AV:A/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 In the Linux kernel, the following vulnerability has been resolved: crypto: algif_hash - fix double free in hash_accept If accept(2) is called on socket type algif_hash with MSG_MORE flag set and crypto_ahash_import fails, sk2 is freed. However, it is also freed in af_alg_release, leading to slab-use-after-free error. 2025-07-25 CVE-2025-38079 openEuler-24.03-LTS-SP2 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability was found in Linux Kernel (Operating System) and classified as problematic.The manipulation of the argument bNumDescriptors with an unknown input leads to a unknown weakness. Using CWE to declare the problem leads to CWE-125. The product reads data past the end, or before the beginning, of the intended buffer.Impacted is confidentiality.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch 7a6d6b68db128da2078ccd9a751dfa3f75c9cf5b/41827a2dbdd7880df9881506dee13bc88d4230bb/1df80d748f984290c895e843401824215dcfbfb0/a8f842534807985d3a676006d140541b87044345/4fa7831cf0ac71a0a345369d1a6084f2b096e55e/74388368927e9c52a69524af5bbd6c55eb4690de/485e1b741eb838cbe1d6b0e81e5ab62ae6c095cf/fe7f7ac8e0c708446ff017453add769ffc15deed is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version. 2025-07-25 CVE-2025-38103 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability was found in Linux Kernel up to 6.16-rc1 (Operating System). It has been classified as critical.CWE is classifying the issue as CWE-404. The product does not release or incorrectly releases a resource before it is made available for re-use.This is going to have an impact on availability.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc2 eliminates this vulnerability. Applying the patch c337efb20d6d9f9bbb4746f6b119917af5c886dc/b44f791f27b14c9eb6b907fbe51f2ba8bec32085/5814a7fc3abb41f63f2d44c9d3ff9d4e62965b72/9c19498bdd7cb9d854bd3c54260f71cf7408495e/b4e9bab6011b9559b7c157b16b91ae46d4d8c533/d1bc80da75c789f2f6830df89d91fb2f7a509943/82448d4dcd8406dec688632a405fdcf7f170ec69/82ffbe7776d0ac084031f114167712269bf3d832 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version. 2025-07-25 CVE-2025-38115 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability, which was classified as critical, has been found in Linux Kernel up to 6.6.93/6.12.33/6.15.2/6.16-rc1 (Operating System).Using CWE to declare the problem leads to CWE-416. Referencing memory after it has been freed can cause a program to crash, use unexpected values, or execute code.Impacted is confidentiality, integrity, and availability.Upgrading to version 6.6.94, 6.12.34, 6.15.3 or 6.16-rc2 eliminates this vulnerability. Applying the patch bdd56875c6926d8009914f427df71797693e90d4/4e83f2dbb2bf677e614109df24426c4dded472d4/d7882db79135c829a922daf3571f33ea1e056ae3/6fe26f694c824b8a4dbf50c635bee1302e3f099c is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version. 2025-07-25 CVE-2025-38117 openEuler-24.03-LTS-SP2 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability, which was classified as problematic, was found in Linux Kernel up to 8058c88ac0df21239daee54b5934d5c80ca9685f (Operating System).CWE is classifying the issue as CWE-401. The product does not sufficiently track and release allocated memory after it has been used, which slowly consumes remaining memory.This is going to have an impact on confidentiality.Upgrading to version 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch b5ad58285f9217d68cd5ea2ad86ce254a3fe7c4d/90bc7f5a244aadee4292b28098b7c98aadd4b3aa/39bab2d3517b5b50c609b4f8c66129bf619fffa0/251496ce1728c9fd47bd2b20a7b21b20b9a020ca/8068e1e42b46518ce680dc6470bcd710efc3fa0a/ea77c397bff8b6d59f6d83dae1425b08f465e8b5 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version. 2025-07-25 CVE-2025-38120 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability classified as problematic has been found in Linux Kernel (Operating System).This is going to have an impact on confidentiality, integrity, and availability.Upgrading to version 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch 0e65f38bd1aa14ea86e221b7bb814d38278d86c3/85eef1748c024da1a191aed56b30a3a65958c50c/4399f59a9467a324ed46657555f0e1f209a14acb/a04302867094bdc6efac1b598370fc47cf3f2388/3382a1ed7f778db841063f5d7e317ac55f9e7f72 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version. 2025-07-25 CVE-2025-38124 openEuler-24.03-LTS-SP2 Medium 5.5 AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability, which was classified as problematic, has been found in Linux Kernel up to 6.6.93/6.12.33/6.15.2 (Operating System).Using CWE to declare the problem leads to CWE-371.Impacted is confidentiality, integrity, and availability.Upgrading to version 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch 1d3c5d0dec6797eca3a861dab0816fa9505d9c3e/276849954d7cbe6eec827b21fe2df43f9bf07011/0e061abaad1498c5b76c10c594d4359ceb6b9145/0153f36041b8e52019ebfa8629c13bf8f9b0a951 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version. 2025-07-25 CVE-2025-38127 openEuler-24.03-LTS-SP2 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability has been found in Linux Kernel up to 6.15.2 (Operating System) and classified as problematic.The CWE definition for the vulnerability is CWE-125. The product reads data past the end, or before the beginning, of the intended buffer.As an impact it is known to affect confidentiality, integrity, and availability.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch e5ce9df1d68094d37360dbd9b09289d42fa21e54/7ee3fb6258da8c890a51b514f60d7570dc703605/40471b23147c86ea3ed97faee79937c618250bd0/5482ef9875eaa43f0435e14570e1193823de857e/ee5ee646385f5846dcbc881389f3c44a197c402a/5a85c21f812e02cb00ca07007d88acdd42d08c46/ac4e317a95a1092b5da5b9918b7118759342641c is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.The vulnerability is also documented in the vulnerability database at EUVD (EUVD-2025-19787). 2025-07-25 CVE-2025-38157 openEuler-24.03-LTS-SP2 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability classified as problematic was found in Linux Kernel up to 6.15.3 (Operating System).As an impact it is known to affect confidentiality, integrity, and availability.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.95, 6.12.35, 6.15.4 or 6.16-rc1 eliminates this vulnerability. Applying the patch d9a55869d8237e677ddaa18b0f58586364cfbc1c/1f6332872374b7f482fc4ad865f9422fedb587fc/fbfe8446cd3274b9e367f5708d94574230a44409/5018d035530b6fbfad33eeb1dd1bc87da419a276/a87cbcc909ccfd394d4936a94663f586453d0961/aaa644e7ffff02e12c89cbce4753bc0b6f23ff87/d14cbed4baccd712447fb3f9c011f008b56b2097/42cb74a92adaf88061039601ddf7c874f58b554e is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.The vulnerability is also documented in the vulnerability database at EUVD (EUVD-2025-20037). 2025-07-25 CVE-2025-38219 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability, which was classified as critical, has been found in Linux Kernel up to 6.6.94/6.12.34/6.15.3 (Operating System).Using CWE to declare the problem leads to CWE-476. A NULL pointer dereference occurs when the application dereferences a pointer that it expects to be valid, but is NULL, typically causing a crash or exit.Impacted is availability.Upgrading to version 6.6.95, 6.12.35, 6.15.4 or 6.16-rc1 eliminates this vulnerability. Applying the patch cf6a4c4ac7b6e3214f25df594c9689a62f1bb456/be5f3061a6f904e3674257879e71881ceee5b673/d7af6eee8cd60f55aa8c5fe2b91f11ec0c9a0f27/e26268ff1dcae5662c1b96c35f18cfa6ab73d9de is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version.The vulnerability is also documented in the vulnerability database at EUVD (EUVD-2025-20036). 2025-07-25 CVE-2025-38220 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 Linux kernel is the kernel used by Linux, the open source operating system of the Linux Foundation in the United States. There is a security vulnerability in Linux kernel. This vulnerability originates from improper processing of composing size in vivid drivers, which may lead to over-bounds writing. 2025-07-25 CVE-2025-38226 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability, which was classified as problematic, was found in Linux Kernel up to 32700ecf8007e071d1ce4c78f65b85f46d05f32a (Operating System).The manipulation of the argument adxl_component_count with an unknown input leads to a unknown weakness. CWE is classifying the issue as CWE-125. The product reads data past the end, or before the beginning, of the intended buffer.This is going to have an impact on confidentiality.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.94, 6.12.34, 6.15.3 or 6.16-rc1 eliminates this vulnerability. Applying the patch 80bf28fd623d97dd4f4825fbbe9d736cec2afba3/a6ed3a6edff09c1187cc6ade7f5967bca2376a13/bf6a8502a5f4ff6e4d135d795945cdade49ec8b0/e8530ed3c0769a4d8f79c212715ec1cf277787f8/3f5d0659000923735350da60ad710f8c804544fe/a13e8343ffcff27af1ff79597ff7ba241e6d9471/31ef6f7c9aee3be78d63789653e92350f2537f93/20d2d476b3ae18041be423671a8637ed5ffd6958 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version. 2025-07-25 CVE-2025-38298 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880 A vulnerability classified as critical was found in Linux Kernel up to 6.15.3 (Operating System).The CWE definition for the vulnerability is CWE-476. A NULL pointer dereference occurs when the application dereferences a pointer that it expects to be valid, but is NULL, typically causing a crash or exit.As an impact it is known to affect availability.Upgrading to version 5.4.295, 5.10.239, 5.15.186, 6.1.142, 6.6.95, 6.12.35, 6.15.4 or 6.16-rc1 eliminates this vulnerability. Applying the patch 5c1a34ff5b0bfdfd2f9343aa9b08d25df618bac5/ec669e5bf409f16e464bfad75f0ba039a45de29a/43d5e3bb5f1dcd91e30238ea0b59a5f77063f84e/23361b479f2700c00960d3ae9cdc8ededa762d47/2e7c64d7a92c031d016f11c8e8cb05131ab7b75a/f78b38af3540b4875147b7b884ee11a27b3dbf4c/a377996d714afb8d4d5f4906336f78510039da29/af98b0157adf6504fade79b3e6cb260c4ff68e37 is able to eliminate this problem. The bugfix is ready for download at git.kernel.org. The best possible mitigation is suggested to be upgrading to the latest version. 2025-07-25 CVE-2025-38337 openEuler-24.03-LTS-SP2 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-07-25 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-1880