An update for kernel is now available for openEuler-24.03-LTS-SP2 Security Advisory openeuler-security@openeuler.org openEuler security committee openEuler-SA-2025-2884 Final 1.0 1.0 2025-12-30 Initial 2025-12-30 2025-12-30 openEuler SA Tool V1.0 2025-12-30 kernel security update An update for kernel is now available for openEuler-24.03-LTS-SP2 The Linux Kernel, the operating system core itself. Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Apply the link chain quirk on NEC isoc endpoints Two clearly different specimens of NEC uPD720200 (one with start/stop bug, one without) were seen to cause IOMMU faults after some Missed Service Errors. Faulting address is immediately after a transfer ring segment and patched dynamic debug messages revealed that the MSE was received when waiting for a TD near the end of that segment: [ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0 [ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000] [ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000] It gets even funnier if the next page is a ring segment accessible to the HC. Below, it reports MSE in segment at ff1e8000, plows through a zero-filled page at ff1e9000 and starts reporting events for TRBs in page at ff1ea000 every microframe, instead of jumping to seg ff1e6000. [ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag. [ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 At some point completion events change from Isoch Buffer Overrun to Short Packet and the HC finally finds cycle bit mismatch in ff1ec000. [ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2 It's possible that data from the isochronous device were written to random buffers of pending TDs on other endpoints (either IN or OUT), other devices or even other HCs in the same IOMMU domain. Lastly, an error from a different USB device on another HC. Was it caused by the above? I don't know, but it may have been. The disk was working without any other issues and generated PCIe traffic to starve the NEC of upstream BW and trigger those MSEs. The two HCs shared one x1 slot by means of a commercial "PCIe splitter" board. [ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd [ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s [ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00 [ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0 Fortunately, it appears that this ridiculous bug is avoided by setting the chain bit of Link TRBs on isochronous rings. Other ancient HCs are known which also expect the bit to be set and they ignore Link TRBs if it's not. Reportedly, 0.95 spec guaranteed that the bit is set. The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports tens of MSEs per second and runs into the bug within seconds. Chaining Link TRBs allows the same workload to run for many minutes, many times. No ne ---truncated---(CVE-2025-22022) In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check The dacloffset field was originally typed as int and used in an unchecked addition, which could overflow and bypass the existing bounds check in both smb_check_perm_dacl() and smb_inherit_dacl(). This could result in out-of-bounds memory access and a kernel crash when dereferencing the DACL pointer. This patch converts dacloffset to unsigned int and uses check_add_overflow() to validate access to the DACL.(CVE-2025-22039) In the Linux kernel, the following vulnerability has been resolved:backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()Lockdep detects the following issue on led-backlight removal: [ 142.315935] ------------[ cut here ]------------ [ 142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80 ... [ 142.500725] Call trace: [ 142.503176] led_sysfs_enable+0x54/0x80 (P) [ 142.507370] led_bl_remove+0x80/0xa8 [led_bl] [ 142.511742] platform_remove+0x30/0x58 [ 142.515501] device_remove+0x54/0x90 ...Indeed, led_sysfs_enable() has to be called with the led_accesslock held.Hold the lock when calling led_sysfs_disable().(CVE-2025-23144) In the Linux kernel, the following vulnerability has been resolved: mfd: ene-kb3930: Fix a potential NULL pointer dereference The off_gpios could be NULL. Add missing check in the kb3930_probe(). This is similar to the issue fixed in commit b1ba8bcb2d1f ("backlight: hx8357: Fix potential NULL pointer dereference"). This was detected by our static analysis tool.(CVE-2025-23146) In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add check to handle incorrect queue size qsize represents size of shared queued between driver and video firmware. Firmware can modify this value to an invalid large value. In such situation, empty_space will be bigger than the space actually available. Since new_wr_idx is not checked, so the following code will result in an OOB write. ... qsize = qhdr->q_size if (wr_idx >= rd_idx) empty_space = qsize - (wr_idx - rd_idx) .... if (new_wr_idx < qsize) { memcpy(wr_ptr, packet, dwords << 2) --> OOB write Add check to ensure qsize is within the allocated size while reading and writing packets into the queue.(CVE-2025-23158) In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix a resource leak related to the scp device in FW initialization On Mediatek devices with a system companion processor (SCP) the mtk_scp structure has to be removed explicitly to avoid a resource leak. Free the structure in case the allocation of the firmware structure fails during the firmware initialization.(CVE-2025-23160) In the Linux kernel, the following vulnerability has been resolved: net: tls: explicitly disallow disconnect syzbot discovered that it can disconnect a TLS socket and then run into all sort of unexpected corner cases. I have a vague recollection of Eric pointing this out to us a long time ago. Supporting disconnect is really hard, for one thing if offload is enabled we'd need to wait for all packets to be _acked_. Disconnect is not commonly used, disallow it. The immediate problem syzbot run into is the warning in the strp, but that's just the easiest bug to trigger: WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 Call Trace: <TASK> tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363 tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043 inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678 sock_recvmsg_nosec net/socket.c:1023 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1045 __sys_recvfrom+0x202/0x380 net/socket.c:2237(CVE-2025-37756) In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix the warning from __kernel_write_iter [ 2110.972290] ------------[ cut here ]------------ [ 2110.972301] WARNING: CPU: 3 PID: 735 at fs/read_write.c:599 __kernel_write_iter+0x21b/0x280 This patch doesn't allow writing to directory.(CVE-2025-37775) In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_break_all_levII_oplock() There is a room in smb_break_all_levII_oplock that can cause racy issues when unlocking in the middle of the loop. This patch use read lock to protect whole loop.(CVE-2025-37776) In the Linux kernel, the following vulnerability has been resolved: riscv: uprobes: Add missing fence.i after building the XOL buffer The XOL (execute out-of-line) buffer is used to single-step the replaced instruction(s) for uprobes. The RISC-V port was missing a proper fence.i (i$ flushing) after constructing the XOL buffer, which can result in incorrect execution of stale/broken instructions. This was found running the BPF selftests "test_progs: uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the uprobes tests randomly blew up.(CVE-2025-37822) In the Linux kernel, the following vulnerability has been resolved: pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config() With CONFIG_COMPILE_TEST && !CONFIG_HAVE_CLK, pwm_mediatek_config() has a divide-by-zero in the following line: do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm])); due to the fact that the !CONFIG_HAVE_CLK version of clk_get_rate() returns zero. This is presumably just a theoretical problem: COMPILE_TEST overrides the dependency on RALINK which would select COMMON_CLK. Regardless it's a good idea to check for the error explicitly to avoid divide-by-zero. Fixes the following warning: drivers/pwm/pwm-mediatek.o: warning: objtool: .text: unexpected end of section [ukleinek: s/CONFIG_CLK/CONFIG_HAVE_CLK/](CVE-2025-37850) In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid There is a string parsing logic error which can lead to an overflow of hid or uid buffers. Comparing ACPIID_LEN against a total string length doesn't take into account the lengths of individual hid and uid buffers so the check is insufficient in some cases. For example if the length of hid string is 4 and the length of the uid string is 260, the length of str will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer which size is 256. The same applies to the hid string with length 13 and uid string with length 250. Check the length of hid and uid strings separately to prevent buffer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2025-37927) In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix ECVF vports unload on shutdown flow Fix shutdown flow UAF when a virtual function is created on the embedded chip (ECVF) of a BlueField device. In such case the vport acl ingress table is not properly destroyed. ECVF functionality is independent of ecpf_vport_exists capability and thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not test it when enabling/disabling ECVF vports. kernel log: [] refcount_t: underflow; use-after-free. [] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0x124/0x220 ---------------- [] Call trace: [] refcount_warn_saturate+0x124/0x220 [] tree_put_node+0x164/0x1e0 [mlx5_core] [] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core] [] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core] [] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core] [] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core] [] esw_vport_cleanup+0x64/0x90 [mlx5_core] [] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core] [] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core] [] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core] [] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core] [] mlx5_sriov_detach+0x40/0x50 [mlx5_core] [] mlx5_unload+0x40/0xc4 [mlx5_core] [] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core] [] mlx5_unload_one+0x3c/0x60 [mlx5_core] [] shutdown+0x7c/0xa4 [mlx5_core] [] pci_device_shutdown+0x3c/0xa0 [] device_shutdown+0x170/0x340 [] __do_sys_reboot+0x1f4/0x2a0 [] __arm64_sys_reboot+0x2c/0x40 [] invoke_syscall+0x78/0x100 [] el0_svc_common.constprop.0+0x54/0x184 [] do_el0_svc+0x30/0xac [] el0_svc+0x48/0x160 [] el0t_64_sync_handler+0xa4/0x12c [] el0t_64_sync+0x1a4/0x1a8 [] --[ end trace 9c4601d68c70030e ]---(CVE-2025-38109) In the Linux kernel, the following vulnerability has been resolved: kernfs: Relax constraint in draining guard The active reference lifecycle provides the break/unbreak mechanism but the active reference is not truly active after unbreak -- callers don't use it afterwards but it's important for proper pairing of kn->active counting. Assuming this mechanism is in place, the WARN check in kernfs_should_drain_open_files() is too sensitive -- it may transiently catch those (rightful) callers between kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen Ridong: kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain ... wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active To avoid the false positives (mind panic_on_warn) remove the check altogether. (This is meant as quick fix, I think active reference break/unbreak may be simplified with larger rework.)(CVE-2025-38282) In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check dce_hwseq before dereferencing it [WHAT] hws was checked for null earlier in dce110_blank_stream, indicating hws can be null, and should be checked whenever it is used. (cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad)(CVE-2025-38361) In the Linux kernel, the following vulnerability has been resolved: x86/sev: Evict cache lines during SNP memory validation An SNP cache coherency vulnerability requires a cache line eviction mitigation when validating memory after a page state change to private. The specific mitigation is to touch the first and last byte of each 4K page that is being validated. There is no need to perform the mitigation when performing a page state change to shared and rescinding validation. CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that, when set, indicates that the software mitigation for this vulnerability is not needed. Implement the mitigation and invoke it when validating memory (making it private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest is vulnerable.(CVE-2025-38560) In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent infinite loop in rt6_nlmsg_size() While testing prior patch, I was able to trigger an infinite loop in rt6_nlmsg_size() in the following place: list_for_each_entry_rcu(sibling, &f6i->fib6_siblings, fib6_siblings) { rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len); } This is because fib6_del_route() and fib6_add_rt2node() uses list_del_rcu(), which can confuse rcu readers, because they might no longer see the head of the list. Restart the loop if f6i->fib6_nsiblings is zero.(CVE-2025-38588) In the Linux kernel, the following vulnerability has been resolved: eventpoll: Fix semi-unbounded recursion Ensure that epoll instances can never form a graph deeper than EP_MAX_NESTS+1 links. Currently, ep_loop_check_proc() ensures that the graph is loop-free and does some recursion depth checks, but those recursion depth checks don't limit the depth of the resulting tree for two reasons: - They don't look upwards in the tree. - If there are multiple downwards paths of different lengths, only one of the paths is actually considered for the depth check since commit 28d82dc1c4ed ("epoll: limit paths"). Essentially, the current recursion depth check in ep_loop_check_proc() just serves to prevent it from recursing too deeply while checking for loops. A more thorough check is done in reverse_path_check() after the new graph edge has already been created; this checks, among other things, that no paths going upwards from any non-epoll file with a length of more than 5 edges exist. However, this check does not apply to non-epoll files. As a result, it is possible to recurse to a depth of at least roughly 500, tested on v6.15. (I am unsure if deeper recursion is possible; and this may have changed with commit 8c44dac8add7 ("eventpoll: Fix priority inversion problem").) To fix it: 1. In ep_loop_check_proc(), note the subtree depth of each visited node, and use subtree depths for the total depth calculation even when a subtree has already been visited. 2. Add ep_get_upwards_depth_proc() for similarly determining the maximum depth of an upwards walk. 3. In ep_loop_check(), use these values to limit the total path length between epoll nodes to EP_MAX_NESTS edges.(CVE-2025-38614) In the Linux kernel, the following vulnerability has been resolved: net/packet: fix a race in packet_set_ring() and packet_notifier() When packet_set_ring() releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This race and the fix are both similar to that of commit 15fe076edea7 ("net/packet: fix a race in packet_bind() and packet_notifier()"). There too the packet_notifier NETDEV_UP event managed to run while a po->bind_lock critical section had to be temporarily released. And the fix was similarly to temporarily set po->num to zero to keep the socket unhooked until the lock is retaken. The po->bind_lock in packet_set_ring and packet_notifier precede the introduction of git history.(CVE-2025-38617) In the Linux kernel, the following vulnerability has been resolved: rv: Use strings in da monitors tracepoints Using DA monitors tracepoints with KASAN enabled triggers the following warning: BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 Read of size 32 at addr ffffffffaada8980 by task ... Call Trace: <TASK> [...] do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 ? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10 ? trace_event_sncid+0x83/0x200 trace_event_sncid+0x163/0x200 [...] The buggy address belongs to the variable: automaton_snep+0x4e0/0x5e0 This is caused by the tracepoints reading 32 bytes __array instead of __string from the automata definition. Such strings are literals and reading 32 bytes ends up in out of bound memory accesses (e.g. the next automaton's data in this case). The error is harmless as, while printing the string, we stop at the null terminator, but it should still be fixed. Use the __string facilities while defining the tracepoints to avoid reading out of bound memory.(CVE-2025-38636) In the Linux kernel, the following vulnerability has been resolved: ice: Fix a null pointer dereference in ice_copy_and_init_pkg() Add check for the return value of devm_kmemdup() to prevent potential null pointer dereference.(CVE-2025-38664) In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime() snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will leads to null pointer dereference. This was reproduced with topology loading and marking a link as ignore due to missing hardware component on the system. On module removal the soc_tplg_remove_link() would call snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored, no runtime was created.(CVE-2025-38706) In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session() The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)(CVE-2025-39675) In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl() syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel buffer is allocated to hold `insn->n` samples (each of which is an `unsigned int`). For some instruction types, `insn->n` samples are copied back to user-space, unless an error code is being returned. The problem is that not all the instruction handlers that need to return data to userspace fill in the whole `insn->n` samples, so that there is an information leak. There is a similar syzbot report for `do_insnlist_ioctl()`, although it does not have a reproducer for it at the time of writing. One culprit is `insn_rw_emulate_bits()` which is used as the handler for `INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have a specific handler for that instruction, but do have an `INSN_BITS` handler. For `INSN_READ` it only fills in at most 1 sample, so if `insn->n` is greater than 1, the remaining `insn->n - 1` samples copied to userspace will be uninitialized kernel data. Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It never returns an error, even if it fails to fill the buffer. Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure that uninitialized parts of the allocated buffer are zeroed before handling each instruction. Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not always necessary to clear the whole buffer.(CVE-2025-39684) In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a race when updating an existing write After nfs_lock_and_join_requests() tests for whether the request is still attached to the mapping, nothing prevents a call to nfs_inode_remove_request() from succeeding until we actually lock the page group. The reason is that whoever called nfs_inode_remove_request() doesn't necessarily have a lock on the page group head. So in order to avoid races, let's take the page group lock earlier in nfs_lock_and_join_requests(), and hold it across the removal of the request in nfs_inode_remove_request().(CVE-2025-39697) In the Linux kernel, the following vulnerability has been resolved: smb: client: fix race with concurrent opens in rename(2) Besides sending the rename request to the server, the rename process also involves closing any deferred close, waiting for outstanding I/O to complete as well as marking all existing open handles as deleted to prevent them from deferring closes, which increases the race window for potential concurrent opens on the target file. Fix this by unhashing the dentry in advance to prevent any concurrent opens on the target.(CVE-2025-39825) In the Linux kernel, the following vulnerability has been resolved: kernfs: Fix UAF in polling when open file is released A use-after-free (UAF) vulnerability was identified in the PSI (Pressure Stall Information) monitoring mechanism: BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140 Read of size 8 at addr ffff3de3d50bd308 by task systemd/1 psi_trigger_poll+0x3c/0x140 cgroup_pressure_poll+0x70/0xa0 cgroup_file_poll+0x8c/0x100 kernfs_fop_poll+0x11c/0x1c0 ep_item_poll.isra.0+0x188/0x2c0 Allocated by task 1: cgroup_file_open+0x88/0x388 kernfs_fop_open+0x73c/0xaf0 do_dentry_open+0x5fc/0x1200 vfs_open+0xa0/0x3f0 do_open+0x7e8/0xd08 path_openat+0x2fc/0x6b0 do_filp_open+0x174/0x368 Freed by task 8462: cgroup_file_release+0x130/0x1f8 kernfs_drain_open_files+0x17c/0x440 kernfs_drain+0x2dc/0x360 kernfs_show+0x1b8/0x288 cgroup_file_show+0x150/0x268 cgroup_pressure_write+0x1dc/0x340 cgroup_file_write+0x274/0x548 Reproduction Steps: 1. Open test/cpu.pressure and establish epoll monitoring 2. Disable monitoring: echo 0 > test/cgroup.pressure 3. Re-enable monitoring: echo 1 > test/cgroup.pressure The race condition occurs because: 1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it: - Releases PSI triggers via cgroup_file_release() - Frees of->priv through kernfs_drain_open_files() 2. While epoll still holds reference to the file and continues polling 3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv epolling disable/enable cgroup.pressure fd=open(cpu.pressure) while(1) ... epoll_wait kernfs_fop_poll kernfs_get_active = true echo 0 > cgroup.pressure ... cgroup_file_show kernfs_show // inactive kn kernfs_drain_open_files cft->release(of); kfree(ctx); ... kernfs_get_active = false echo 1 > cgroup.pressure kernfs_show kernfs_activate_one(kn); kernfs_fop_poll kernfs_get_active = true cgroup_file_poll psi_trigger_poll // UAF ... end: close(fd) To address this issue, introduce kernfs_get_active_of() for kernfs open files to obtain active references. This function will fail if the open file has been released. Replace kernfs_get_active() with kernfs_get_active_of() to prevent further operations on released file descriptors.(CVE-2025-39881) In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access.(CVE-2025-39901) In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbdirect: verify remaining_data_length respects max_fragmented_recv_size This is inspired by the check for data_offset + data_length.(CVE-2025-39942) In the Linux kernel, the following vulnerability has been resolved: mm/ksm: fix flag-dropping behavior in ksm_madvise syzkaller discovered the following crash: (kernel BUG) [ 44.607039] ------------[ cut here ]------------ [ 44.607422] kernel BUG at mm/userfaultfd.c:2067! [ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none) [ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460 <snip other registers, drop unreliable trace> [ 44.617726] Call Trace: [ 44.617926] <TASK> [ 44.619284] userfaultfd_release+0xef/0x1b0 [ 44.620976] __fput+0x3f9/0xb60 [ 44.621240] fput_close_sync+0x110/0x210 [ 44.622222] __x64_sys_close+0x8f/0x120 [ 44.622530] do_syscall_64+0x5b/0x2f0 [ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 44.623244] RIP: 0033:0x7f365bb3f227 Kernel panics because it detects UFFD inconsistency during userfaultfd_release_all(). Specifically, a VMA which has a valid pointer to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags. The inconsistency is caused in ksm_madvise(): when user calls madvise() with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode, it accidentally clears all flags stored in the upper 32 bits of vma->vm_flags. Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and int are 32-bit wide. This setup causes the following mishap during the &= ~VM_MERGEABLE assignment. VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000. After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then promoted to unsigned long before the & operation. This promotion fills upper 32 bits with leading 0s, as we're doing unsigned conversion (and even for a signed conversion, this wouldn't help as the leading bit is 0). & operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears the upper 32-bits of its value. Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the BIT() macro. Note: other VM_* flags are not affected: This only happens to the VM_MERGEABLE flag, as the other VM_* flags are all constants of type int and after ~ operation, they end up with leading 1 and are thus converted to unsigned long with leading 1s. Note 2: After commit 31defc3b01d9 ("userfaultfd: remove (VM_)BUG_ON()s"), this is no longer a kernel BUG, but a WARNING at the same place: [ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067 but the root-cause (flag-drop) remains the same. [(CVE-2025-40040) In the Linux kernel, the following vulnerability has been resolved: Squashfs: fix uninit-value in squashfs_get_parent Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug. This is caused by open_by_handle_at() being called with a file handle containing an invalid parent inode number. In particular the inode number is that of a symbolic link, rather than a directory. Squashfs_get_parent() gets called with that symbolic link inode, and accesses the parent member field. unsigned int parent_ino = squashfs_i(inode)->parent; Because non-directory inodes in Squashfs do not have a parent value, this is uninitialised, and this causes an uninitialised value access. The fix is to initialise parent with the invalid inode 0, which will cause an EINVAL error to be returned. Regular inodes used to share the parent field with the block_list_start field. This is removed in this commit to enable the parent field to contain the invalid inode number 0.(CVE-2025-40049) In the Linux kernel, the following vulnerability has been resolved: net: use dst_dev_rcu() in sk_setup_caps() Use RCU to protect accesses to dst->dev from sk_setup_caps() and sk_dst_gso_max_size(). Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(), and ip_dst_mtu_maybe_forward(). ip4_dst_hoplimit() can use dst_dev_net_rcu().(CVE-2025-40170) An update for kernel is now available for openEuler-20.03-LTS-SP4/openEuler-22.03-LTS-SP3/openEuler-22.03-LTS-SP4/openEuler-24.03-LTS-SP2. openEuler Security has rated this update as having a security impact of high. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section. High kernel https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22022 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-22039 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-23144 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-23146 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-23158 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-23160 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37756 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37775 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37776 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37822 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37850 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-37927 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38109 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38282 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38361 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38560 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38588 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38614 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38617 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38636 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38664 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-38706 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-39675 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-39684 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-39697 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-39825 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-39881 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-39901 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-39942 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-40040 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-40049 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2025-40170 https://nvd.nist.gov/vuln/detail/CVE-2025-22022 https://nvd.nist.gov/vuln/detail/CVE-2025-22039 https://nvd.nist.gov/vuln/detail/CVE-2025-23144 https://nvd.nist.gov/vuln/detail/CVE-2025-23146 https://nvd.nist.gov/vuln/detail/CVE-2025-23158 https://nvd.nist.gov/vuln/detail/CVE-2025-23160 https://nvd.nist.gov/vuln/detail/CVE-2025-37756 https://nvd.nist.gov/vuln/detail/CVE-2025-37775 https://nvd.nist.gov/vuln/detail/CVE-2025-37776 https://nvd.nist.gov/vuln/detail/CVE-2025-37822 https://nvd.nist.gov/vuln/detail/CVE-2025-37850 https://nvd.nist.gov/vuln/detail/CVE-2025-37927 https://nvd.nist.gov/vuln/detail/CVE-2025-38109 https://nvd.nist.gov/vuln/detail/CVE-2025-38282 https://nvd.nist.gov/vuln/detail/CVE-2025-38361 https://nvd.nist.gov/vuln/detail/CVE-2025-38560 https://nvd.nist.gov/vuln/detail/CVE-2025-38588 https://nvd.nist.gov/vuln/detail/CVE-2025-38614 https://nvd.nist.gov/vuln/detail/CVE-2025-38617 https://nvd.nist.gov/vuln/detail/CVE-2025-38636 https://nvd.nist.gov/vuln/detail/CVE-2025-38664 https://nvd.nist.gov/vuln/detail/CVE-2025-38706 https://nvd.nist.gov/vuln/detail/CVE-2025-39675 https://nvd.nist.gov/vuln/detail/CVE-2025-39684 https://nvd.nist.gov/vuln/detail/CVE-2025-39697 https://nvd.nist.gov/vuln/detail/CVE-2025-39825 https://nvd.nist.gov/vuln/detail/CVE-2025-39881 https://nvd.nist.gov/vuln/detail/CVE-2025-39901 https://nvd.nist.gov/vuln/detail/CVE-2025-39942 https://nvd.nist.gov/vuln/detail/CVE-2025-40040 https://nvd.nist.gov/vuln/detail/CVE-2025-40049 https://nvd.nist.gov/vuln/detail/CVE-2025-40170 openEuler-24.03-LTS-SP2 bpftool-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm bpftool-debuginfo-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-debuginfo-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-debugsource-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-devel-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-extra-modules-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-headers-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-source-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-tools-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-tools-debuginfo-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm kernel-tools-devel-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm perf-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm perf-debuginfo-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm python3-perf-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm python3-perf-debuginfo-6.6.0-129.0.0.127.oe2403sp2.aarch64.rpm bpftool-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm bpftool-debuginfo-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-debuginfo-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-debugsource-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-devel-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-extra-modules-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-headers-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-source-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-tools-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-tools-debuginfo-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-tools-devel-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm perf-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm perf-debuginfo-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm python3-perf-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm python3-perf-debuginfo-6.6.0-129.0.0.127.oe2403sp2.x86_64.rpm kernel-6.6.0-129.0.0.127.oe2403sp2.src.rpm In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Apply the link chain quirk on NEC isoc endpoints Two clearly different specimens of NEC uPD720200 (one with start/stop bug, one without) were seen to cause IOMMU faults after some Missed Service Errors. Faulting address is immediately after a transfer ring segment and patched dynamic debug messages revealed that the MSE was received when waiting for a TD near the end of that segment: [ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0 [ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000] [ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000] It gets even funnier if the next page is a ring segment accessible to the HC. Below, it reports MSE in segment at ff1e8000, plows through a zero-filled page at ff1e9000 and starts reporting events for TRBs in page at ff1ea000 every microframe, instead of jumping to seg ff1e6000. [ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag. [ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 At some point completion events change from Isoch Buffer Overrun to Short Packet and the HC finally finds cycle bit mismatch in ff1ec000. [ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2 It's possible that data from the isochronous device were written to random buffers of pending TDs on other endpoints (either IN or OUT), other devices or even other HCs in the same IOMMU domain. Lastly, an error from a different USB device on another HC. Was it caused by the above? I don't know, but it may have been. The disk was working without any other issues and generated PCIe traffic to starve the NEC of upstream BW and trigger those MSEs. The two HCs shared one x1 slot by means of a commercial "PCIe splitter" board. [ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd [ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s [ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00 [ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0 Fortunately, it appears that this ridiculous bug is avoided by setting the chain bit of Link TRBs on isochronous rings. Other ancient HCs are known which also expect the bit to be set and they ignore Link TRBs if it's not. Reportedly, 0.95 spec guaranteed that the bit is set. The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports tens of MSEs per second and runs into the bug within seconds. Chaining Link TRBs allows the same workload to run for many minutes, many times. No ne ---truncated--- 2025-12-30 CVE-2025-22022 openEuler-24.03-LTS-SP2 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check The dacloffset field was originally typed as int and used in an unchecked addition, which could overflow and bypass the existing bounds check in both smb_check_perm_dacl() and smb_inherit_dacl(). This could result in out-of-bounds memory access and a kernel crash when dereferencing the DACL pointer. This patch converts dacloffset to unsigned int and uses check_add_overflow() to validate access to the DACL. 2025-12-30 CVE-2025-22039 openEuler-24.03-LTS-SP2 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved:backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()Lockdep detects the following issue on led-backlight removal: [ 142.315935] ------------[ cut here ]------------ [ 142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80 ... [ 142.500725] Call trace: [ 142.503176] led_sysfs_enable+0x54/0x80 (P) [ 142.507370] led_bl_remove+0x80/0xa8 [led_bl] [ 142.511742] platform_remove+0x30/0x58 [ 142.515501] device_remove+0x54/0x90 ...Indeed, led_sysfs_enable() has to be called with the led_accesslock held.Hold the lock when calling led_sysfs_disable(). 2025-12-30 CVE-2025-23144 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: mfd: ene-kb3930: Fix a potential NULL pointer dereference The off_gpios could be NULL. Add missing check in the kb3930_probe(). This is similar to the issue fixed in commit b1ba8bcb2d1f ("backlight: hx8357: Fix potential NULL pointer dereference"). This was detected by our static analysis tool. 2025-12-30 CVE-2025-23146 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add check to handle incorrect queue size qsize represents size of shared queued between driver and video firmware. Firmware can modify this value to an invalid large value. In such situation, empty_space will be bigger than the space actually available. Since new_wr_idx is not checked, so the following code will result in an OOB write. ... qsize = qhdr->q_size if (wr_idx >= rd_idx) empty_space = qsize - (wr_idx - rd_idx) .... if (new_wr_idx < qsize) { memcpy(wr_ptr, packet, dwords << 2) --> OOB write Add check to ensure qsize is within the allocated size while reading and writing packets into the queue. 2025-12-30 CVE-2025-23158 openEuler-24.03-LTS-SP2 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix a resource leak related to the scp device in FW initialization On Mediatek devices with a system companion processor (SCP) the mtk_scp structure has to be removed explicitly to avoid a resource leak. Free the structure in case the allocation of the firmware structure fails during the firmware initialization. 2025-12-30 CVE-2025-23160 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: net: tls: explicitly disallow disconnect syzbot discovered that it can disconnect a TLS socket and then run into all sort of unexpected corner cases. I have a vague recollection of Eric pointing this out to us a long time ago. Supporting disconnect is really hard, for one thing if offload is enabled we'd need to wait for all packets to be _acked_. Disconnect is not commonly used, disallow it. The immediate problem syzbot run into is the warning in the strp, but that's just the easiest bug to trigger: WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 Call Trace: <TASK> tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363 tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043 inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678 sock_recvmsg_nosec net/socket.c:1023 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1045 __sys_recvfrom+0x202/0x380 net/socket.c:2237 2025-12-30 CVE-2025-37756 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix the warning from __kernel_write_iter [ 2110.972290] ------------[ cut here ]------------ [ 2110.972301] WARNING: CPU: 3 PID: 735 at fs/read_write.c:599 __kernel_write_iter+0x21b/0x280 This patch doesn't allow writing to directory. 2025-12-30 CVE-2025-37775 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_break_all_levII_oplock() There is a room in smb_break_all_levII_oplock that can cause racy issues when unlocking in the middle of the loop. This patch use read lock to protect whole loop. 2025-12-30 CVE-2025-37776 openEuler-24.03-LTS-SP2 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: riscv: uprobes: Add missing fence.i after building the XOL buffer The XOL (execute out-of-line) buffer is used to single-step the replaced instruction(s) for uprobes. The RISC-V port was missing a proper fence.i (i$ flushing) after constructing the XOL buffer, which can result in incorrect execution of stale/broken instructions. This was found running the BPF selftests "test_progs: uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the uprobes tests randomly blew up. 2025-12-30 CVE-2025-37822 openEuler-24.03-LTS-SP2 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config() With CONFIG_COMPILE_TEST && !CONFIG_HAVE_CLK, pwm_mediatek_config() has a divide-by-zero in the following line: do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm])); due to the fact that the !CONFIG_HAVE_CLK version of clk_get_rate() returns zero. This is presumably just a theoretical problem: COMPILE_TEST overrides the dependency on RALINK which would select COMMON_CLK. Regardless it's a good idea to check for the error explicitly to avoid divide-by-zero. Fixes the following warning: drivers/pwm/pwm-mediatek.o: warning: objtool: .text: unexpected end of section [ukleinek: s/CONFIG_CLK/CONFIG_HAVE_CLK/] 2025-12-30 CVE-2025-37850 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid There is a string parsing logic error which can lead to an overflow of hid or uid buffers. Comparing ACPIID_LEN against a total string length doesn't take into account the lengths of individual hid and uid buffers so the check is insufficient in some cases. For example if the length of hid string is 4 and the length of the uid string is 260, the length of str will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer which size is 256. The same applies to the hid string with length 13 and uid string with length 250. Check the length of hid and uid strings separately to prevent buffer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. 2025-12-30 CVE-2025-37927 openEuler-24.03-LTS-SP2 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix ECVF vports unload on shutdown flow Fix shutdown flow UAF when a virtual function is created on the embedded chip (ECVF) of a BlueField device. In such case the vport acl ingress table is not properly destroyed. ECVF functionality is independent of ecpf_vport_exists capability and thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not test it when enabling/disabling ECVF vports. kernel log: [] refcount_t: underflow; use-after-free. [] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0x124/0x220 ---------------- [] Call trace: [] refcount_warn_saturate+0x124/0x220 [] tree_put_node+0x164/0x1e0 [mlx5_core] [] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core] [] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core] [] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core] [] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core] [] esw_vport_cleanup+0x64/0x90 [mlx5_core] [] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core] [] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core] [] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core] [] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core] [] mlx5_sriov_detach+0x40/0x50 [mlx5_core] [] mlx5_unload+0x40/0xc4 [mlx5_core] [] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core] [] mlx5_unload_one+0x3c/0x60 [mlx5_core] [] shutdown+0x7c/0xa4 [mlx5_core] [] pci_device_shutdown+0x3c/0xa0 [] device_shutdown+0x170/0x340 [] __do_sys_reboot+0x1f4/0x2a0 [] __arm64_sys_reboot+0x2c/0x40 [] invoke_syscall+0x78/0x100 [] el0_svc_common.constprop.0+0x54/0x184 [] do_el0_svc+0x30/0xac [] el0_svc+0x48/0x160 [] el0t_64_sync_handler+0xa4/0x12c [] el0t_64_sync+0x1a4/0x1a8 [] --[ end trace 9c4601d68c70030e ]--- 2025-12-30 CVE-2025-38109 openEuler-24.03-LTS-SP2 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: kernfs: Relax constraint in draining guard The active reference lifecycle provides the break/unbreak mechanism but the active reference is not truly active after unbreak -- callers don't use it afterwards but it's important for proper pairing of kn->active counting. Assuming this mechanism is in place, the WARN check in kernfs_should_drain_open_files() is too sensitive -- it may transiently catch those (rightful) callers between kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen Ridong: kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain ... wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active To avoid the false positives (mind panic_on_warn) remove the check altogether. (This is meant as quick fix, I think active reference break/unbreak may be simplified with larger rework.) 2025-12-30 CVE-2025-38282 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check dce_hwseq before dereferencing it [WHAT] hws was checked for null earlier in dce110_blank_stream, indicating hws can be null, and should be checked whenever it is used. (cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad) 2025-12-30 CVE-2025-38361 openEuler-24.03-LTS-SP2 High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: x86/sev: Evict cache lines during SNP memory validation An SNP cache coherency vulnerability requires a cache line eviction mitigation when validating memory after a page state change to private. The specific mitigation is to touch the first and last byte of each 4K page that is being validated. There is no need to perform the mitigation when performing a page state change to shared and rescinding validation. CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that, when set, indicates that the software mitigation for this vulnerability is not needed. Implement the mitigation and invoke it when validating memory (making it private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest is vulnerable. 2025-12-30 CVE-2025-38560 openEuler-24.03-LTS-SP2 Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent infinite loop in rt6_nlmsg_size() While testing prior patch, I was able to trigger an infinite loop in rt6_nlmsg_size() in the following place: list_for_each_entry_rcu(sibling, &f6i->fib6_siblings, fib6_siblings) { rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len); } This is because fib6_del_route() and fib6_add_rt2node() uses list_del_rcu(), which can confuse rcu readers, because they might no longer see the head of the list. Restart the loop if f6i->fib6_nsiblings is zero. 2025-12-30 CVE-2025-38588 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: eventpoll: Fix semi-unbounded recursion Ensure that epoll instances can never form a graph deeper than EP_MAX_NESTS+1 links. Currently, ep_loop_check_proc() ensures that the graph is loop-free and does some recursion depth checks, but those recursion depth checks don't limit the depth of the resulting tree for two reasons: - They don't look upwards in the tree. - If there are multiple downwards paths of different lengths, only one of the paths is actually considered for the depth check since commit 28d82dc1c4ed ("epoll: limit paths"). Essentially, the current recursion depth check in ep_loop_check_proc() just serves to prevent it from recursing too deeply while checking for loops. A more thorough check is done in reverse_path_check() after the new graph edge has already been created; this checks, among other things, that no paths going upwards from any non-epoll file with a length of more than 5 edges exist. However, this check does not apply to non-epoll files. As a result, it is possible to recurse to a depth of at least roughly 500, tested on v6.15. (I am unsure if deeper recursion is possible; and this may have changed with commit 8c44dac8add7 ("eventpoll: Fix priority inversion problem").) To fix it: 1. In ep_loop_check_proc(), note the subtree depth of each visited node, and use subtree depths for the total depth calculation even when a subtree has already been visited. 2. Add ep_get_upwards_depth_proc() for similarly determining the maximum depth of an upwards walk. 3. In ep_loop_check(), use these values to limit the total path length between epoll nodes to EP_MAX_NESTS edges. 2025-12-30 CVE-2025-38614 openEuler-24.03-LTS-SP2 Medium 6.2 AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: net/packet: fix a race in packet_set_ring() and packet_notifier() When packet_set_ring() releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This race and the fix are both similar to that of commit 15fe076edea7 ("net/packet: fix a race in packet_bind() and packet_notifier()"). There too the packet_notifier NETDEV_UP event managed to run while a po->bind_lock critical section had to be temporarily released. And the fix was similarly to temporarily set po->num to zero to keep the socket unhooked until the lock is retaken. The po->bind_lock in packet_set_ring and packet_notifier precede the introduction of git history. 2025-12-30 CVE-2025-38617 openEuler-24.03-LTS-SP2 Medium 4.1 AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: rv: Use strings in da monitors tracepoints Using DA monitors tracepoints with KASAN enabled triggers the following warning: BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 Read of size 32 at addr ffffffffaada8980 by task ... Call Trace: <TASK> [...] do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 ? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10 ? trace_event_sncid+0x83/0x200 trace_event_sncid+0x163/0x200 [...] The buggy address belongs to the variable: automaton_snep+0x4e0/0x5e0 This is caused by the tracepoints reading 32 bytes __array instead of __string from the automata definition. Such strings are literals and reading 32 bytes ends up in out of bound memory accesses (e.g. the next automaton's data in this case). The error is harmless as, while printing the string, we stop at the null terminator, but it should still be fixed. Use the __string facilities while defining the tracepoints to avoid reading out of bound memory. 2025-12-30 CVE-2025-38636 openEuler-24.03-LTS-SP2 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: ice: Fix a null pointer dereference in ice_copy_and_init_pkg() Add check for the return value of devm_kmemdup() to prevent potential null pointer dereference. 2025-12-30 CVE-2025-38664 openEuler-24.03-LTS-SP2 Medium 4.1 AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime() snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will leads to null pointer dereference. This was reproduced with topology loading and marking a link as ignore due to missing hardware component on the system. On module removal the soc_tplg_remove_link() would call snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored, no runtime was created. 2025-12-30 CVE-2025-38706 openEuler-24.03-LTS-SP2 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session() The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893) 2025-12-30 CVE-2025-39675 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl() syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel buffer is allocated to hold `insn->n` samples (each of which is an `unsigned int`). For some instruction types, `insn->n` samples are copied back to user-space, unless an error code is being returned. The problem is that not all the instruction handlers that need to return data to userspace fill in the whole `insn->n` samples, so that there is an information leak. There is a similar syzbot report for `do_insnlist_ioctl()`, although it does not have a reproducer for it at the time of writing. One culprit is `insn_rw_emulate_bits()` which is used as the handler for `INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have a specific handler for that instruction, but do have an `INSN_BITS` handler. For `INSN_READ` it only fills in at most 1 sample, so if `insn->n` is greater than 1, the remaining `insn->n - 1` samples copied to userspace will be uninitialized kernel data. Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It never returns an error, even if it fails to fill the buffer. Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure that uninitialized parts of the allocated buffer are zeroed before handling each instruction. Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not always necessary to clear the whole buffer. 2025-12-30 CVE-2025-39684 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a race when updating an existing write After nfs_lock_and_join_requests() tests for whether the request is still attached to the mapping, nothing prevents a call to nfs_inode_remove_request() from succeeding until we actually lock the page group. The reason is that whoever called nfs_inode_remove_request() doesn't necessarily have a lock on the page group head. So in order to avoid races, let's take the page group lock earlier in nfs_lock_and_join_requests(), and hold it across the removal of the request in nfs_inode_remove_request(). 2025-12-30 CVE-2025-39697 openEuler-24.03-LTS-SP2 High 7.5 AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: smb: client: fix race with concurrent opens in rename(2) Besides sending the rename request to the server, the rename process also involves closing any deferred close, waiting for outstanding I/O to complete as well as marking all existing open handles as deleted to prevent them from deferring closes, which increases the race window for potential concurrent opens on the target file. Fix this by unhashing the dentry in advance to prevent any concurrent opens on the target. 2025-12-30 CVE-2025-39825 openEuler-24.03-LTS-SP2 High 7.0 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: kernfs: Fix UAF in polling when open file is released A use-after-free (UAF) vulnerability was identified in the PSI (Pressure Stall Information) monitoring mechanism: BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140 Read of size 8 at addr ffff3de3d50bd308 by task systemd/1 psi_trigger_poll+0x3c/0x140 cgroup_pressure_poll+0x70/0xa0 cgroup_file_poll+0x8c/0x100 kernfs_fop_poll+0x11c/0x1c0 ep_item_poll.isra.0+0x188/0x2c0 Allocated by task 1: cgroup_file_open+0x88/0x388 kernfs_fop_open+0x73c/0xaf0 do_dentry_open+0x5fc/0x1200 vfs_open+0xa0/0x3f0 do_open+0x7e8/0xd08 path_openat+0x2fc/0x6b0 do_filp_open+0x174/0x368 Freed by task 8462: cgroup_file_release+0x130/0x1f8 kernfs_drain_open_files+0x17c/0x440 kernfs_drain+0x2dc/0x360 kernfs_show+0x1b8/0x288 cgroup_file_show+0x150/0x268 cgroup_pressure_write+0x1dc/0x340 cgroup_file_write+0x274/0x548 Reproduction Steps: 1. Open test/cpu.pressure and establish epoll monitoring 2. Disable monitoring: echo 0 > test/cgroup.pressure 3. Re-enable monitoring: echo 1 > test/cgroup.pressure The race condition occurs because: 1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it: - Releases PSI triggers via cgroup_file_release() - Frees of->priv through kernfs_drain_open_files() 2. While epoll still holds reference to the file and continues polling 3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv epolling disable/enable cgroup.pressure fd=open(cpu.pressure) while(1) ... epoll_wait kernfs_fop_poll kernfs_get_active = true echo 0 > cgroup.pressure ... cgroup_file_show kernfs_show // inactive kn kernfs_drain_open_files cft->release(of); kfree(ctx); ... kernfs_get_active = false echo 1 > cgroup.pressure kernfs_show kernfs_activate_one(kn); kernfs_fop_poll kernfs_get_active = true cgroup_file_poll psi_trigger_poll // UAF ... end: close(fd) To address this issue, introduce kernfs_get_active_of() for kernfs open files to obtain active references. This function will fail if the open file has been released. Replace kernfs_get_active() with kernfs_get_active_of() to prevent further operations on released file descriptors. 2025-12-30 CVE-2025-39881 openEuler-24.03-LTS-SP2 High 7.3 AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access. 2025-12-30 CVE-2025-39901 openEuler-24.03-LTS-SP2 High 7.1 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbdirect: verify remaining_data_length respects max_fragmented_recv_size This is inspired by the check for data_offset + data_length. 2025-12-30 CVE-2025-39942 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: mm/ksm: fix flag-dropping behavior in ksm_madvise syzkaller discovered the following crash: (kernel BUG) [ 44.607039] ------------[ cut here ]------------ [ 44.607422] kernel BUG at mm/userfaultfd.c:2067! [ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none) [ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460 <snip other registers, drop unreliable trace> [ 44.617726] Call Trace: [ 44.617926] <TASK> [ 44.619284] userfaultfd_release+0xef/0x1b0 [ 44.620976] __fput+0x3f9/0xb60 [ 44.621240] fput_close_sync+0x110/0x210 [ 44.622222] __x64_sys_close+0x8f/0x120 [ 44.622530] do_syscall_64+0x5b/0x2f0 [ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 44.623244] RIP: 0033:0x7f365bb3f227 Kernel panics because it detects UFFD inconsistency during userfaultfd_release_all(). Specifically, a VMA which has a valid pointer to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags. The inconsistency is caused in ksm_madvise(): when user calls madvise() with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode, it accidentally clears all flags stored in the upper 32 bits of vma->vm_flags. Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and int are 32-bit wide. This setup causes the following mishap during the &= ~VM_MERGEABLE assignment. VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000. After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then promoted to unsigned long before the & operation. This promotion fills upper 32 bits with leading 0s, as we're doing unsigned conversion (and even for a signed conversion, this wouldn't help as the leading bit is 0). & operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears the upper 32-bits of its value. Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the BIT() macro. Note: other VM_* flags are not affected: This only happens to the VM_MERGEABLE flag, as the other VM_* flags are all constants of type int and after ~ operation, they end up with leading 1 and are thus converted to unsigned long with leading 1s. Note 2: After commit 31defc3b01d9 ("userfaultfd: remove (VM_)BUG_ON()s"), this is no longer a kernel BUG, but a WARNING at the same place: [ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067 but the root-cause (flag-drop) remains the same. [ 2025-12-30 CVE-2025-40040 openEuler-24.03-LTS-SP2 Medium 5.8 AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: Squashfs: fix uninit-value in squashfs_get_parent Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug. This is caused by open_by_handle_at() being called with a file handle containing an invalid parent inode number. In particular the inode number is that of a symbolic link, rather than a directory. Squashfs_get_parent() gets called with that symbolic link inode, and accesses the parent member field. unsigned int parent_ino = squashfs_i(inode)->parent; Because non-directory inodes in Squashfs do not have a parent value, this is uninitialised, and this causes an uninitialised value access. The fix is to initialise parent with the invalid inode 0, which will cause an EINVAL error to be returned. Regular inodes used to share the parent field with the block_list_start field. This is removed in this commit to enable the parent field to contain the invalid inode number 0. 2025-12-30 CVE-2025-40049 openEuler-24.03-LTS-SP2 Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884 In the Linux kernel, the following vulnerability has been resolved: net: use dst_dev_rcu() in sk_setup_caps() Use RCU to protect accesses to dst->dev from sk_setup_caps() and sk_dst_gso_max_size(). Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(), and ip_dst_mtu_maybe_forward(). ip4_dst_hoplimit() can use dst_dev_net_rcu(). 2025-12-30 CVE-2025-40170 openEuler-24.03-LTS-SP2 High 7.4 AV:L/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H kernel security update 2025-12-30 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2025-2884